How to get the machine id of a  system using apex

Hi,
I have a requirement to retrieve the machine id of a system through oracle apex. I have checked the syscontext() function also but i am not able to find the one for machine id. So, is there any way to retreive the machine id using a sql or plsql command in oracle apex.
Thanks in Advance,
Balaji.

Best to ask that question on the APEX forum : this is the Oracle Forms forum

Similar Messages

  • I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    AMoriyama wrote:
    I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
    I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
    I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
    All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
    Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
    At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine.  By clicking on it you can navigate through it any way you like, just as you would normally.
    Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
    - or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

  • How to get the values from struct data type using java code..?

    Hi ,
    I am newer to java.
    we are using oracle database.
    How to get the data from struct data type using java code.
    Thanks in Advance.
    Regards,
    kumar

    Hi Rajeev,
    To retrieve a FilterContainer you will need to traverse the report structure:
    ReportStructure boReportStructure = boDocumentInstance.getStructure();
    ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
    FilterContainer boFilterContainer = null;
    if (boReportContainer.hasFilter()) {
         boFilterContainer = boReportContainer.getFilter();
    } else {
         boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
    Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
    Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
    Hope this helps.
    Regards,
    Dan

  • How to get the customize url of an portlet using PLSQL

    How to get the customize url of an portlet using PLSQL.

    Are you trying to call the portlet Customization form directly from the browser?

  • How to get the size of physical memory by using system call ?

    how to get the size of physical memory by using system call ?What system call can be used for me to get the size of physical memor? thanks.

    %vmstat 3
    procs memory page disk faults cpu
    r b w swap free re mf pi po fr de sr s0 -- -- -- in sy cs us sy id
    0 0 0 3025816 994456 4 19 6 0 0 0 0 8 0 0 0 459 253 139 1 1 99
    0 0 0 2864688 777408 0 2 0 0 0 0 0 3 0 0 0 428 134 175 0 1 99
    0 0 0 2864688 777408 0 0 0 0 0 0 0 7 0 0 0 448 112 166 0 0 100
    one interesting observation about vmstat I found out is (mostly on Solaris)
    the first line of information always off chart, so I usually do a few interval to get constant result.
    if you use linux
    just
    cat /proc/meminfo

  • How to create the log file in remote system using log4j.

    Hi,
    How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
    public class Logging
    Logger log=null;
    FileAppender fileapp=null;
    public Logging(String classname)
    try
    log = Logger.getLogger(classname);
    String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
    fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
    log.addAppender(fileapp);
    log.info("Logger initilized");
    }catch(Exception ex)
    ex.printStackTrace();
    java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
    at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
    at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Please help.
    Thanks in advance.
    Saravanan.K

    Sorry path is missing for the above request.
    path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
    please help.
    Saravanan.K

  • How to get the job logs from sm35 by using the queue id and session name?

    hi all,
    can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
    FYI..
    i want to read this job log and i want to send it to an email id.
    -> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module  job_close.
    but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
    thanks in advance,
    koushik

    Hi Bharath,
    If you want to download it to the local file then you can follow the instructions in the below link.
    How to download Batch Input Session Log?
    Regards,
    Sachin

  • How to Get the Job, Cost center, Position description using select query

    Hi all,
    How to get the  Job, Cost center, Position description through select query without using the Function module?
    thanks,
    Prasad

    use adhoq query and take the report chose both text and value

  • How to get the complete definition of a table using SQL?

    How to get the complete definition code of a table using SQL?

    Something like this ?
    SQL> set long 10000
    SQL> set pages 200
    SQL> select dbms_metadata.get_ddl('TABLE','EMP') from dual;
    DBMS_METADATA.GET_DDL('TABLE','EMP')
      CREATE TABLE "SCOTT"."EMP"
       (    "EMPNO" NUMBER(4,0),
            "ENAME" VARCHAR2(10),
            "JOB" VARCHAR2(9),
            "MGR" NUMBER(4,0),
            "HIREDATE" DATE,
            "SAL" NUMBER(7,2),
            "COMM" NUMBER(7,2),
            "DEPTNO" NUMBER(2,0),
             CONSTRAINT "PK_EMP" PRIMARY KEY ("EMPNO")
      USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
      STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "USERS"  ENABLE,
             CONSTRAINT "FK_DEPTNO" FOREIGN KEY ("DEPTNO")
              REFERENCES "SCOTT"."DEPT" ("DEPTNO") ENABLE
       ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
      STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "USERS"
    SQL>Amardeep Sidhu

  • My iPhone getting stolen,how I get the actual location my iPhone way using the apps find my iPhone?

    My iPhone getting stolen,how I get the actual location the full address to find my iPhone way using the apps find my iPhone?

    If you set up the Find My iPhone service prior to your iPhone going missing - the app is for tracking a device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored). Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to pay for it. 
    If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Contact the police and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • How to get the selected entry from a Dropdown (using IF_WD_SELECT_OPTIONS)

    Hello,
    I created a Selection screen by adding attribute M_HANDLER of type IF_WD_SELECT_OPTIONS.
    This way I can create a selection screen with normal select-options.
    Now I added a parameter for a dropdown list. The Value set is passed correctly. No problem there. The values are filled and diplayed correctly.
    * add the SHIP-TO field to the selection
      DATA: ltp_text  TYPE string.
      DATA: lta_ship_to_table type WDY_KEY_VALUE_table,
            lwa_ship_to       like LINE OF lta_ship_to_table.
      DATA: context_node_ship_to_table TYPE REF TO if_wd_context_node.
    * get all declared attributes
      context_node_ship_to_table = wd_context->get_child_node( 'SHIP_TO_TABLE' ).
      context_node_ship_to_table->get_static_attributes_table(
        IMPORTING
          table  = lta_ship_to_table ).
      ltp_text = wd_assist->if_wd_component_assistance~get_text( 'L01' ).
      wd_this->m_handler_dlv->add_parameter_field(
                             i_id           = 'KUNWE'
                             i_description  = ltp_text
                             i_as_dropdown  = 'X'
                             it_value_set   = lta_ship_to_table
                             i_within_block = 'BLK1' ).
    The problem is to GET the selected value in the method that is called after clicking on the Search button.
    I tried using several methods, for example GET_PARAMETER_FIELD and GET_SELECTION_SCREEN_ITEMS.
    * Get the Ship-to
      DATA: ltp_kunwe       TYPE REF TO data.
      ltp_kunwe = wd_this->m_handler_dlv->get_value_of_parameter_field(
                                            i_id = 'KUNWE' ).
    * Assign it to a field symbol
      ASSIGN ltp_kunwe->* TO <fs_kunwe>.
    Result was INITIAL.
    DATA: lrf_get_selection_screen_items TYPE if_wd_select_options=>tt_selection_screen_item.
      wd_this->m_handler_dlv->get_selection_screen_items(
                  IMPORTING
                     et_selection_screen_items = lrf_get_selection_screen_items ).
    Result was INITIAL, although the table was retrieved with all values.
    wd_this->m_handler_dlv->get_parameter_field(
                                          EXPORTING
                                            i_id = 'KUNWE'
                                          IMPORTING
                                            e_value = ltp_kunwe ).
    Also INITIAL.
    It looks like I am missing a step (maybe to set lead selection for this field). What did I miss?
    How can I get to the value?

    Thanks!
    Problem solved:
    DATA: lr_value             TYPE REF TO data.
    CREATE DATA lr_value TYPE string.                     "<----  I was missing this code
      LOOP AT lta_ship_to_table INTO lwa_ship_to.
        value_set-key   = lwa_ship_to-key.
        value_set-value = lwa_ship_to-value.
    *    INSERT value_set INTO TABLE lt_value_set.
        append value_set TO lt_value_set.
      ENDLOOP.
      ltp_text = wd_assist->if_wd_component_assistance~get_text( 'L01' ).
      wd_this->m_handler_dlv->add_parameter_field(
                              i_description  = ltp_text
                              i_id           = 'KUNWE'
                              i_value        = lr_value   "<----  I was missing this code
                              i_as_dropdown  = abap_true
                              it_value_set   = lt_value_set
                              i_within_block = 'BLK1' ).
    I looked at that parameter, but thought is was only used to SET the value, not required to get it back as well. Because it IS an import parameter...

  • How to get the TransactionManager in a stateful EJB (using JPA toplink)

    I use weblogic 10.3
    This is my stateful EJB and I need to get the TransactionManager because I want to suspend my transaction...
    Here it is ok for the UserTransaction ut but I got an error with the TransactionManager
    EJB Code
    //@Stateless(name = "MyFacadeEJB", mappedName = "MyFacadeEJB")
    @Stateful(name = "MyFacadeEJB", mappedName = "MyFacadeEJB")
    @TransactionManagement(TransactionManagementType.BEAN)
    @Remote
    @Local
    public class MyFacadeEJBBean implements MyFacadeEJB, MyFacadeEJBLocal, Serializable {   
    @Resource javax.transaction.UserTransaction ut;
    @Resource javax.transaction.TransactionManager tm;
    Error Message at the deploy EJB
    Unable to deploy EJB: MyFacadeEJB from PocJTA-PEJB-ejb:
    [EJB:011026]The EJB container failed while creating the java:/comp/env namespace for this EJB deployment.
    weblogic.deployment.EnvironmentException: [EJB:010176]The resource-env-ref 'test.ejb.MyFacadeEJBBean/tm' declared in the ejb-jar.xml descriptor or annotation has no JNDI name mapped to it. The resource-ref must be mapped to a JNDI name using the resource-description element of the weblogic-ejb-jar.xml descriptor or corresponding annotation.
         at weblogic.ejb.container.deployer.EnvironmentBuilder.addResourceEnvReferences(EnvironmentBuilder.java:639)
         at weblogic.ejb.container.deployer.EJBDeployer.setupEnvironmentContext(EJBDeployer.java:247)

    Chpruvos,
    Hi, I ran into a similar issue when specifying WebLogic specific descriptors in ejb-jar.xml and the corresponding weblogic-ejb-jar.xml. I no longer use this approach in our example code - we just use annotations. see: http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial#Tutorial_Source
    My session bean is stateless - I don't know how much it will help with your statefull bean managed config but here are copies of the ejb.jar configuration xml I used to use. All the resource*ref elements (see the resource-description* element) ended up in the weblogic specific weblogic-ejb-jar.xml descriptor file.
    ejb-jar.xml
    &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:ejb="http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee [http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd]" version="3.0"&gt;
    *&lt;enterprise-beans&gt;*
    *&lt;session&gt;*
    *&lt;ejb-name&gt;ApplicationService&lt;/ejb-name&gt;*
    *&lt;ejb-class&gt;org.eclipse.persistence.example.unified.business.ApplicationService&lt;/ejb-class&gt;*
    *&lt;session-type&gt;Stateless&lt;/session-type&gt;*
    +&lt;!-- default to CMP Container managed transations not BMP --&gt;+
    +&lt;!-- transaction-type&gt;Bean&lt;/transaction-type--&gt;+
    +&lt;!-- resource-env-ref id="ResourceEnvRef_1080980284303"&gt;+
    +&lt;resource-env-ref-name&gt;localOracle10RemoteDS&lt;/resource-env-ref-name&gt;+
    +&lt;resource-env-ref-type&gt;javax.sql.DataSource&lt;/resource-env-ref-type&gt;+
    +&lt;/resource-env-ref--&gt;+
    +&lt;!-- resource-ref&gt;+
    +&lt;res-ref-name&gt;localOracle10RemoteDS&lt;/res-ref-name&gt;+
    +&lt;res-type&gt;javax.sql.DataSource&lt;/res-type&gt;+
    +&lt;res-auth&gt;Application&lt;/res-auth&gt;+
    +&lt;/resource-ref--&gt;+
    *&lt;/session&gt;*
    *&lt;/enterprise-beans&gt;*
    &lt;/ejb-jar&gt;
    weblogic-ejb-jar.xml
    &lt;?xml version="1.0"?&gt;
    &lt;weblogic-ejb-jar&gt;
    *&lt;weblogic-enterprise-bean&gt;*
    *&lt;ejb-name&gt;ApplicationService&lt;/ejb-name&gt;*
    *&lt;stateless-session-descriptor&gt;*
    *&lt;pool&gt;*
    *&lt;max-beans-in-free-pool&gt;8&lt;/max-beans-in-free-pool&gt;*
    *&lt;initial-beans-in-free-pool&gt;2&lt;/initial-beans-in-free-pool&gt;*
    *&lt;/pool&gt;*
    *&lt;/stateless-session-descriptor&gt;*
    {color:#008000}&lt;resource-description&gt;
    &lt;res-ref-name&gt;localOracle10RemoteDS&lt;/res-ref-name&gt;
    &lt;jndi-name&gt;localOracle10RemoteDS&lt;/jndi-name&gt;
    &lt;/resource-description&gt;
    &lt;resource-env-description&gt;
    &lt;resource-env-ref-name&gt;localOracle10RemoteDS&lt;/resource-env-ref-name&gt;
    &lt;jndi-name&gt;localOracle10RemoteDS&lt;/jndi-name&gt;
    &lt;/resource-env-description&gt;
    {color}+&lt;!-- jndi-name&gt;localOracle10RemoteDS&lt;/jndi-name--&gt;+
    *&lt;/weblogic-enterprise-bean&gt;*
    &lt;/weblogic-ejb-jar&gt;
    thank you
    /michael
    [http://www.eclipselink.org|http://www.eclipselink.org/]
    Edited by: michael_obrien on Feb 26, 2009 9:56 AM

  • How to get the addition DML Error information when using PL/SQL?

    Given the following statements:
    drop table bob;
    create table bob
    col1 number(6,2),
    col2 number(6,2) not null
    insert into bob(col1, col2) values (123.12, null);
    insert into bob(col1, col2) values (123.12, 12345.12);
    commit;
    I get different behavior from Oracle error messages.
    Here is the sample output:
    Table dropped.
    Table created.
    insert into bob(col1, col2) values (123.12, null)
    ERROR at line 1:
    ORA-01400: cannot insert NULL into ("BOB"."COL2")
    insert into bob(col1, col2) values (123.12, 12345.12)
    ERROR at line 1:
    ORA-01438: value larger than specified precision allows for this column
    Commit complete.
    Note that in the first error (1400) the generated error message contains the name of the problematic column ("BOB"."COL2"). Also note that in the regurgitated statement the error pointer (*) is at the far left. In this case, the regurgitated statement is of no use to me because the error message identifies the culprit column.
    However, in the second error (1438) the generated error message is very generic and does NOT indicate the problematic column. In addition, in this case the error pointer (*) of the regurgitated statement has moved to point to the troublesome column. In this case, I must use BOTH the error message and the regurgitated statement to completely understand the problem.
    This difference in how error messages are constructed causes difficulty within PL/SQL. If PL/SQL happens to generate a 1400 error message, then simply capturing the error message and giving it to the user provides enough information for him/her to solve the problem. However, if a 1438 error is generated then the resulting error message has insufficient information for the user to pursue the problem.
    So my question is, within PL/SQL do you know how to get your hands on Oracle's regurgitated statements so that they can be presented to the user to assisted him/her in problem resolution?
    Thanks.

    I don't think it's that easy. Notice that if you put the insert into an actual pl/sql block, you don't get the correct column pointer anymore.
    BEGIN insert into bob(col1, col2) values (123.12, 12345.12); END;
    ERROR at line 1:
    ORA-01438: value larger than specified precision allows for this column
    ORA-06512: at line 1
    Richard

  • How to get the vendor number that was created using xk01..?

    Suppose i am creating a vendor with all the information by using a bdc program.
    In the same program if i want to go to the XK02 of that particular vendor that was created recently....how it possible..?
    Means how to get that particular vendor number that was created recently...?

    Hi...
    You Can Get the Vendor number after Calling the Transaction 'XK01' as below.
    <b>Declare a table for Collecting messages :</b>
    DATA: T_MSG TYPE TABLE OF BDCMSGCOLL,
              WA_MSG TYPE  BDCMSGCOLL.
    <b>Then Call Transaction Statment:</b>
    CALL TRANSACTION 'XK01'
               USING T_BDCDATA
               MODE 'N'
               MESSAGES INTO t_msg.
    if sy-subrc = 0.
      READ TABLE T_MSG INTO WA_MSG WITH MSGTYP = 'S'.
                                                                    MSGID = 'F2'
                                                                    MSGNR =  '175'.
    <b>Note: Bcoz the XK01 will issue this message</b>
      if sy-subrc = 0.
      write: / WA_MSG-MSGV1.  "This will contrain Vendor Number
    endif.
    endif.
    And you can also Try the Other method i.e. after the Call transaction statement
    <b> GET PARAMETER ID 'LIF' field V_LIFNR.
      WRITE:/ V_LIFNR.</b>
    Reward if Helpful.

  • How to get the "encoding" of a XML file using JDOM

    As in XML file, <?xml version="1.0" encoding="UTF-8" ?> indicates the encoding of this file
    while using JDOM to parse a XML file, how can I get the encoding type?
    thanx!!!

    What my program do is to get the encoding of XML files and convert them to UTF-8 encoding files, while I need this "encoding" information of the original XML document thus I can convert...
    After reading specifications and JDOM docs, the truth turns to be disappointed, no function is provided to get this information in JDOM level 2(the current released one), while it's promissed that this function will be provided in JDOM level API....
    Thanx all for your help and attention!!!

Maybe you are looking for

  • Problem w. transaction notSupported / releasing JDBC connections

              We are making a call from our EJB client to a stateless session EJB (1) with transaction attribute 'Required' for all methods. From this EJB (1) we get a JDBC connection from the pool and do some JDBC calls (no updates). We then make a call

  • Fillable forms question - FrameMaker to PDF - Without losing copy protection options

    Hello, I'm looking for a solution that will allow us to integrate fields in a Chapter Review-style question area where users can comment their answers (instead of using StickyNotes). It must disallow printing/copying etc to meet content protection re

  • Predefined components

    Hi All, I have a requirement where I need to integrate a db and R3. The requirement is that when the data from db reaches XI, a field "acknowledged time" has to be set with system time and when the record has been sent from XI to R/3, a field called

  • Importing 2.1 into 3.1 how?

    Hi helpful people, I'm having trouble exporting my photos from the old aperture 2.1 into the newer 3.1. (I don't know how)...... The 2.1 is on an external iomega drive if that makes any difference.  I can't actually view the old 2.1 on my macbook pro

  • Encapulation dot1q X native

    interface f0/0.1 encapulation dot1q X native x can be any number right? The actual number has no effect because the packet is native and thus has no tag!