How to get the maxmum quality on a normal DVD DL

Hey can someone tell my how i can get the max quality on a normal DVD DL with FCP and DVDpro the dvd's that i made are not from that quality that i hoped.
Robert

Encode rates are dependent on the length of the video in total minutes.
For example, a 60 minute DVD should be encoded at a maximum bit rate of about 6.8 mbps if you use Dolby2 audio is you intend to burn it on a single layer DVD.
Do the math from there, but remember that you can't go beyond a combined bit rate of 10.2 for video and audio

Similar Messages

  • How to get good picture quality on a burned DVD slideshow using IDVD?

    After producing a slideshow on IDVD from either jpg or psd photos, it looked great when I played the project. Picture quality was excellent. When I burned a DVD to share the slideshow with a friend and when I played this on the same computer, it had lost resolution and looks awful. I am using best quality but this made no difference. On a hdtv using a standard player, the quality is mediocre. Is there any way to get a decent picture quality. I have also burned a DVD and CD from the IPhoto album, and the quality is better. IPhoto will not burn a slideshow or at least I do not know how to. Can you produce decent quality DVD using IDVD or is there a better application to produce decent DVD of photo slideshows?

    ....or is there a better application to produce decent DVD of photo slideshows?
    Yes. It's called DVDSP (apple's top of the line DVD Authoring application). It has a much longer learning curve than iDvd and is more $$$ but it does work well. The Help Menu alone is over 640 pages long. However, is this app significantly better than iDvd solely in terms of visual quality?.... No.
    But it does offer many more tools to address visual artifacts on the finished DVD, more audio control, much better control of durations per slide, audio, buttons that work as expected, among other things. (for additional examples of this see chapter 12 of the DVDSP Help Menu / starting on p. 373).
    Short of DVDSP, and much less money, you can also try these 2 third party apps which come highly recommended on this iDvd Forum:
    http://www.lqgraphics.com/software/phototomovie.php
    http://www.boinx.com/fotomagico/overview/
    At the moment most macs do not yet support burning to Blueray (which does offer much better results). Once this technology is more commonplace, then I believe we will see a significant improvement in what you are trying to do above.
    Hope this is helpful but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • How to get the best quailty for export to DVD

    I am using Final Cut Pro Studio. I'm editing SD 16:9 anamorphic. What suggestions does anyone have for exporting (settings, rendering, to what (idvd, dvd studio pro) to DVD to be played on a computer or TV?
    Thanks

    Duplicate the preset  - actually, the folder for the preset.  Each DVD preset folder contains an MPEG-2 video and a Dolby Digital audio preset.  By duplicating the folder, you will duplicate the presets inside that folder.  The duplicated preset will be placed in the CUSTOM Preset section (below the Apple section).  Open the duplicated preset and tweak settings for the Dolby Digital encoder as I described above.  Tweak the MPEG-2 encoder preset as needed for each individual project.
    You can save any modifications you made to the duplicate presets once you've finished tweaking them.  That will make it easy to use them again in the future.
    As for the Taiyo Yuden / JVC thing, I always used Taiyo Yuden in the past, but about two years ago or so, all of my normal suppliers only had them available in JVC packaging.  Same discs, different marketing name.  Beware though, Taiyo Yuden/JVC also markets a "value" line of blanks that (and I quote) "Haven't met quality checks."  So only purchase blanks from their "premium" line.
    -DH

  • How can I get the best quality video on YouTube?

    I tried what you posted from another poster, Steve, but had a problem at step 2, the part in red.
    2. Import this AVI file into Windows MovieMaker, place the file on MovieMaker's timeline and Publish (to your hard drive) a 
    WMV, dvd-quality (4:3 size) PAL 3,0 M.
    When I click Publish, the only option I get is "YouTube" and "Get Add Ons".
    Since the option I was told to take didn't exist, I clicked "save movie" and then "high definition 1080p".  Hey I'm just trying to figure this stuff out.  I'm new to it, so I picked the highest quality I could find.
    Well, the result is a movie on YouTube that is OK, but nowhere near the quality of the movie on my computer. Just for fun, I uploaded the AVI file to YouTube from MovieMaker.  It was a huge file, it did upload, but the quality was still not there.
    So, I return to my original question, which is almost the same as the originally posted question:
    How should I save video with Premiere Elements to get the highest quality video to post to YouTube?  The videos were taken in AVCHD format, but after editing, I don't know the best rendering option to get the highest quality video when viewed on YouTube.  The videos look great on my computer, but on YouTube, the video is really degraded.
    Thanks for any help!
    I have an i7 processor, 8 gigs or RAM, and am running Windows 7 x64.  Video editing is with Premiere Elements and my video camera is a Canon HG10 that shoots AVCHD.

    I had the best success using the John Cloudman method from the link you posted.  The video was much better quality  on YouTube (in my opinion) with this method than the method of going to Movie Maker etc. I tried John Cloudman's Frame widtht of 1280 and Frame Height of 720 and then frame width 1920 frame width by 720.   I found 1920x1080 better quality on YouTube than Mr. Cloudman's 1280x720. 
    I pasted in the part of the link below that I found most useful. A big thanks to John Cloudman for posting this!!
    John Cloudman offers further advice:
    From the Share tab,  choose Personal Computer and then QuickTime.  Choose the Cable Modem,  DSL preset and then click the Advanced button.
    From the  settings window, do the following:
    b Video Tab
    *Video  Codec: H.264
    *Quality: 100
    *Frame Wdith: 1280
    *Frame Height:  720
    *Frame Rate: 29.97
    *Field Order: None
    *Pixel Aspect  Ratio: square
    *Set Bitrate: checked
    *Bitrate: 8000 kbps
    b  Audio Tab
    *Audio Code: AAC
    *Output Channels: Stereo
    *Frequency:  44kHz
    That should generate a .mov file that Youtube will  handle correctly.  You can modulate that Bitrate to reduce the amount of  data size, and  you can modulate the Quality number to reduce the  encoding time. I  wouldn't go lower than 3000 kbps for a bitrate or  below 50 on Quality.  Hope this helps everyone!

  • HOW DO I GET THE BEST QUALITY RESULT!?!!?

    I have a canon GL2 and when I plug it in directly to the TV and watch my footage the quality is great, I then upload it to Final Cut and the quality is somewhat there, but when I go to export it I can never achieve the quality that it gets when I hook up the camera directly to the TV, and roll the tape. How do I export using compressor or not, to get the best quality, I dont care how big the file size I just need the quality!!! Thank you in advance for the help!

    It depends on what format you want to output to.
    If you just want the best quality, then output to 10-bit Uncompressed quicktime - the files will be huge though.
    Do you need to output back to tape, DVD or something else?
    Also, make sure that you have the right settings in your sequences, so you don't loose any quality there.

  • IDVD quality update... how to get the best looking photo images on your TV

    To get the best quality photo slideshow (that looks the best on my TV)
    1) create the slideshow with music in "Photo to Movie" program
    2) send it to IDVD from "Photo to Movie"
    3) create the menu in iDVD
    4) make a disc image from iDVD (file - save as disk image) save on the desktop
    5) burn DVD at x2 in disc utilities on a Verbatim DVD-R disc
    ???? Any other suggestions to get a better quality product !!
    * special thanks to SDMacuser for all your help and prior posts.
    Cheers
    iMAC 5,1,Intel Core 2 Duo,2.16GHz   Mac OS X (10.4.8)  
    iMAC 5,1,Intel Core 2 Duo,2.16GHz   Mac OS X (10.4.8)  

    in search of the best looking photoslide show DVD to view on a TV..... a couple more questions
    if I understand some of the recent posts to get a clear picture:
    Question #1
    I need to import all of the photos into photoshop CS (or a similar product) and resize them to 1280 x 960 (4:3)ratio then open iDVD and import them.
    If I am doing Ken Burn effects then resize them to 2560 x 1920 and use "Photo to Movie" to create the slideshow then import into iDVD (to get a cool menu)
    can you just bring the images in from iphoto (in the same format that they were imported from the camera)?
    I am using a Nikon D70 6.0 megapixel
    Question #2
    If I burn the disc in iDVD... it is not as good as using Disk utility or Toast because of the burn speed (2X) ... is this correct?

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • How to get the list of top 10 tables grown last week or last few days

    Hi All,
    Please let me know, how to get the list of top 10 tables grown last week or last few days
    Thanks

    Please let me know, how to get the list of top 10 tables grown last week or last few days1.Oracle Version and OS info please ... ALWAYS
    2.Do you have licensing options (Tuning and/or Diagnostics Pack) ?
    3.Have you ran AWR/Statspack in last week or last few days
    1.Because Oracle do not store auto tack the history of tables growth. See below link where one user has showed the possible way of manual track of table(s) growth :
    Re: oracle tables growth
    2.MOS Note for How To Get Table Growth History Information? [ID 1395195.1]
    3.If you are in 10g than EM of 10g has something called Segmnet Statistics which can show you the growth of your table.
    4.Other clue :
    SQL> select * from table (dbms_space.object_growth_trend('SCOTT','EMP','TABLE'));
    TIMEPOINT                                                                   SPACE_USAGE SPACE_ALLOC QUALITY
    17-SEP-12 11.06.20.228000 AM                                                       1593       65536 GOOD5.A good script by Mice Ault for historical growth of segments within AWR:
    http://www.dba-oracle.com/t_table_growth_reports.htm
    Regards
    Girish Sharma

  • How to get the history data from r3?

    Hi Experts,
    I have loaded stock data for jan through the flat file load.
    The stock consists for 2,9,16,23,30 th dates of Jan.
    Remaining dates stock came from R3.
    so problem is stock seems double(Not exactly) for one site(Plant).
    i checked in BI and i dont see any stock data for 31st Jan but it is there in R3.
    So how to get the data for 31st jan from R3 it is using the 2LIS_03_BX Extractor (Tables - MSEG,BSEG).
    i am really stuck up here please help me out..
    Thanks in advance,
    Regards,
    <BMP>

    You can get it from LBWE transaction in R/3 side:
    for example see below:
    Sales and Distribution (SD)          :  application 11, 13, 08 (in LBWE T-code)
    Materials Management (MM)        :  application 03, 02
    Logistics Execution (LE)               :  application 12
    Quality Management                  :  application 05
    Plant Maintenance (PM)              :  application 04, 17
    Customer Service (CS)               :  application 18
    Project System (PS)                   :  application 20
    SAP Retail                                    :  application 40,43,44,45

  • How to get the values from popup window to mainwindow

    HI all,
       I want to get the details from popup window.
          i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
       now i am able to display popup window with values.How to get the values from popup window now.
       I can anybody explain me clearly.
    Thanks&Regards
    kranthi

    Hi Kranthi,
    Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
    Regards,
    Uday

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • How to get the value from a JavaScript and send the same to Java file?

    Hi.
    How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
    Thanks and regards,
    Leslie V

    Yes, I am trying with web application.
    In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
    How to send this 'message' with and to the 'request'?
    Thanks for the help :-)
    The actual JS code is:
    function productdeselection()
    var i=0;
    var j=0;
    var deselectedproduct = new Array(5);
    var message = "Are you sure to delete Product ";
    mvi=document.forms[0].MVI;
    mei=document.forms[0].MEI;
    lpi=document.forms[0].LPI;
    if(null != mvi)
    ++i;
    if(null != mei )
    ++i;
    if(null != lpi)
    ++i;
    if(null != mvi && mvi.checked)
    deselectedproduct[++j]="MVI?";
    if(null != mei && mei.checked)
    deselectedproduct[++j]="GAP?";
    if(null != lpi && lpi.checked)
    deselectedproduct[++j]="LPI?";
    if( 0!=j)
    if(i!=j)
    for (x=0; x<deselectedproduct.length; x++)
    if(null != deselectedproduct[x])
    message =message+ "-" +deselectedproduct[x];
    alert(message);
    else
    //alert(" You cannot remove all products!");
    return false;
    return true;
    }

  • How to get the value from databank

    Hi,
    How to get the value from databank? and how to set the same value to visual script object?
    thanks,
    ra

    Hi,
    You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
    You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
    This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
    Thanks
    Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

  • How to get the value from the readonly field?????

    Hi All,
    I have a readonly field in JSF. in action class i want to get the value of that field.
    How to get the readonly field value???
    i am getting null if the field is readonly.
    i am getting value if the field is not readonly.

    I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".

Maybe you are looking for