How to get the Memory Utilization Data for Cloud Service

Hi,
We are planning to monitor the Performance of Cloud Services hosted onto Azure through VisualStudioOnline [TFS]. However, I couldn't find any performance metric for Memory utilization on individual Cloud Service.
So please help how can we monitor Memory utilization on individual Cloud Service hosted through VSO.
Thanks.
Regards,
Subhash Konduru
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

If you are using the VSO then you can take a look at azure application insights which is a service hosted on azure which will help you to detect issues, solve problems and continuously improve your web applications.
Read more about Application insights here -
http://azure.microsoft.com/en-us/documentation/articles/app-insights-get-started/
https://msdn.microsoft.com/en-us/library/dn793604.aspx
Bhushan | Blog |
LinkedIn | Twitter

Similar Messages

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to get the memory address of an array (pointer in C)?

I am writing an application that exchanges data with a PXI device via DMA. Basically I will provide it a memory address and a direction, and it transfers the data. I would like to give it the memory location of an array in LabVIEW, but I do not know how to get the memory location without doing a DLL call to C code that returns the pointer. Is there an easy way to do this in LabVIEW? Any help is much appreciated.

A similar question was asked recently regarding strings. You cannot pass pointers in LabVIEW as you do in C. You can pass an array to a DLL, but that means you would need to write a wrapper DLL. Be sure to read the section in the LabVIEW Help on calling code from text-based languages and also take a look at the "Call DLL" example that ships with LabVIEW - it contains many examples of how to deal with various datatypes.

How secure is the DocumentRevisions-V100 data for versions?

How secure is the DocumentRevisions-V100 data for versions? Im concerned that if I open and work on a Numbers or Pages document from an encrypted disk image, Versions would save an unencrypted version within the database, making the encryption useless. Does anyone know if this is a problem or not? If so, is it fixed with Mountain Lion?

hnanji wrote:
I do not need the precise location or address, but a general description of how the data is maintained would be helpful. Security is absolutely essential, hence the reason why I am asking. To assume it is simply secure because it's a product by Apple, is not only only ignorant but foolish. If you do not know the answer then no need to reply.
Your question is just as foolish as your request to know details. You will not get them and that is the answer that I do know. You will not get ANY details, ever. When somebody says that "Apple knows details" -kind of funny to me, cause Apple does not exist in that sense - Apple is corporation and corporation uses people, so there are people who know answer to any question, they just will not disclose secure information. So anybody, even me or pvonk, for expample, can know, But people who does, will not release that info. My answer is not intended to help you, just to let you know that you will not get any info. Not foolish person would take a hint, you didn't.

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

How to get the user entered data?

Hi all,
I have created an HTMLB DynPage component.
In That i have created my input screen with textboxes using response.write method.
i have added one onConfirm event on which the data whould validate.
so onConfirm method im trying to get the data with request.getParameter method which returns null...
how to do...how to get the user entered data to do my validations...can anyone plz advice.
Thanks,
Viswes

Hi
inputfield or textbox component entered directly using response.write(...) are not htmlb , but html.
to create portal input field (ie HTMLB), you should do something like
this in the doProcessBeforeOutput member function
InputField field1 = new InputField("Id1");
field1.setSize(8); // 8 characters
this.getForm().addComponent(field1);
and in doProcessAfterInput member function
InputField field1 =
(InputField) this.getComponentByName("Id1");
you can then manipulate the content of the field.
Hope this help,
Guillaume

How to get the restriction pass code for iPhone ?

How to get the restriction pass code for iPhone ?

if you forgot it you have to restore your phone to get past that code

How to get correct opening blance data for the quarterly report in BOFC?

Hi all,
I have a problem with getting the opening balance for the quarterly report.
i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
Could somebody please tell me how to remediate to this issue?
Or how do you manage with the opening balance in BOFC?
Thanks & Regards,
Hitomi

Hi Michael,
HRMS appliocation
database 10.2.0.4
windows XP
ebs 11.5.10.2
One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
We are decommision old windows 2000 machine.
I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
Old box is still there.
Thanks.

How to get the sample repository data of over 6000 records for products

Hi,
I have MDM installed and ready to use with the standard 9 repositories provided by SAP. I was wondering if I can get the unarchive .a2a file with the sample data of records (I think over 6000 records) for the Products repository. I have tried to bring in the two .a2a product files that I have, but it was giving version inconsistent errors. How do and where do I get the real sample data (not the one we can create in data manager) correct version provided by SAP, so that I can get my hands on SAP data manager funtionality.
Thanks in advance,
N@v!n K

Hi Navin,
Business Content archives that are provided by SAP for MDM do not come with the sample data.
In the bsuiness content ,if you unzip the file you will see the a2a archive of the rep as provided by SAP and the import /export maps and the lookup data file.
There is no main records that SAP provide with the sap content it is basically the data modell that SAP provides so that the foundation is set for you and you can now import and work with the data.
However if you wish to use the demo repository or the training rep from Inquera then you will same some sample data already loaded in MDM rep to work upon.
Regarding the version problem
Check the MDM version of the business content rep with the MDM server you are using .They have to match to work correctly.
You can work with a lower archives of the rep(say SP04) with an Upgraded MDM server (say SP06) by using the Update Repository option in the context menu of the MDM server in Console.
But the vice versa is not possible.
Check you MDM server version by clicking on the MDM server and see its details in the right side record detail pane.
To know more on the demo and Inquera rep kinldy view the below links:
https://www.sdn.sap.com/irj/sdn/nw-demomodel#section21 (Demo Rep)
http://www.inquera.com/InqueraCatalog/CustomerLogin.asp(Demo Rep from Inquera you need to register and they will mail you)
Hope It Helped
Thanks & Regards
Simona Pinto

How to get the plsql table data into output cursor

Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manju

manjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it.

How to get the exact day date with the another date field?

Hi,
Please help me how to get the specific day of the week's date with the help of another date field.
Actually , one field(week_day) has 1,2,3,4,5,6,7 here 1--MON,2-- TUE like that.
another field has the date. based on that date, we have to go to that particular week and need to pick up the date by the above week_day. It should be in that week itself.
Thanks in advance!!
Regards,
Vissu...
Edited by: vissu on Oct 29, 2010 3:07 AM

Hi,
Something like this
SELECT TRUNC(<DATE_COLUMN>,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the particular week of the date
SELECT TRUNC(SYSDATE,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the current week
cheers
VT

How to get the materials consumption data

Hi expert,
My requirement is to show the material ordered, material received,material consumption,material stock against project definition...
1. I got the materials ordered and material received against PO of that Project definition but they tell to show the materials got
from another sites for that project definition.
2. I have the mseg table for all datas for materials consumption and materials got from another sit e. i know only movement types and WBS
.if i fetch the data from mseg using movement type and WBS means its not working.i dono how to get the materials consumption
and materials got from another site.
They seeing an entires in cji3 based on movement type and storage location.so only i tried to fetch data from mseg table using movement type and WBS
but its not working.
please tell ur views to get the data .
Regards,
Rathish

hi,
In MM module, one Tcode named MMBE will show you the material' information...
However, from your description, PS/MM will be involved.The cluster table MSEG does hold the data of transaction...

How to enlarge the memory in Microblaze for software applications?

Dear, I wrote a C program, which after compiled generates a ELF binary with around 85KB. However, it is known that the Microblaze by default uses only 64KB. So my question is how can I enlarge the memory in Microblaze for software applications? The application does not use any kind of buffer or data that could be stored in another block memory. The size is larger due to the complexity of the algorithm in question. Is there any way to increase the default block memory in Microblaze? BR,Rodolfo Lossio

lossiox wrote:
Dear, I wrote a C program, which after compiled generates a ELF binary with around 85KB. However, it is known that the Microblaze by default uses only 64KB. So my question is how can I enlarge the memory in Microblaze for software applications? The application does not use any kind of buffer or data that could be stored in another block memory. The size is larger due to the complexity of the algorithm in question. Is there any way to increase the default block memory in Microblaze? BR,Rodolfo Lossio MicroBlaze uses the amount of BRAM that you specified when you created the system using the BSB. There is no "default." To change the amount of BRAM after creating the project: in the EDK, click on the "addresses" tab. Look for the instance of xps_bram_if_ctrl. Change its size using the drop-down combo box. Note that you can only do this in powers-of-two, so if you've already allocated 64 kB the next option is 128 kB. Make sure your FPGA has enough BRAMs to do this!

How to get the open order quantity for a material

Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
    INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN   = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
                  AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
                 AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
   AND VAPMA~WERKS = IT_OUTPUT-WERKS
    AND VBAK~AUART IN S_AUART
     AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.

This could help.
*& Report: zsdvr055                date written: 03/24/00              *
*& Author: Brian Huntley           last update: 03/24/00               *
*& Program Title: Open Order Report                                    *
*& Description: This report will create a list of sales documents      *
*&   that are open (contain at least one item that is not shipped).    *
*&   The report will sort by ship-to customer name and by sales        *
*&   document number.                                                  *
*& Tables:                                                             *
*& Files:                                                              *
*& Transactions:                                                       *
*& Changes:                                                            *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
        VBAP,
        VBUP,
        VBAK,
        VBKD,
        KNA1,
        VBEP,
        VBFA,
        LIKP,
        LIPS,
        EKET,
        T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
         VBELN LIKE VBPA-VBELN,               "sales document
         POSNR LIKE VBPA-POSNR,               "item number
         PARVW LIKE VBPA-PARVW,               "partner function
         KUNNR LIKE VBPA-KUNNR,               "customer number
       END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
        WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
        VBELN LIKE VBPA-VBELN,                "sales document
      END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        MATNR LIKE VBAP-MATNR,                "material
        ARKTX LIKE VBAP-ARKTX,                "description
        PSTYV LIKE VBAP-PSTYV,                "item category
        KDMAT LIKE VBAP-KDMAT,                "customer material
        NETWR LIKE VBAP-NETWR,                "net value
        WAERK LIKE VBAP-WAERK,                "currency
        KWMENG LIKE VBAP-KWMENG,              "quantity
        ERDAT LIKE VBAP-ERDAT,                "entry date
        NETPR LIKE VBAP-NETPR,                "net price
        KPEIN LIKE VBAP-KPEIN,                "pricing unit
        PRCTR LIKE VBAP-PRCTR,                "profit center
        ERNAM LIKE VBAK-ERNAM,                "entered by
        AUART LIKE VBAK-AUART,                "order type
        VKORG LIKE VBAK-VKORG,                "sales organization
        VTWEG LIKE VBAK-VTWEG,                "distribution channel
        VDATU LIKE VBAK-VDATU,                "requested date (header)
        BNAME LIKE VBAK-BNAME,                "name of orderer
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        BZIRK LIKE VBKD-BZIRK,                "sales district
        KURSK LIKE VBKD-KURSK,                "conversion rate
        BSTKD LIKE VBKD-BSTKD,                "customer PO
        LFGSA LIKE VBUP-LFGSA,                "overall delivery status
        FKSAA LIKE VBUP-FKSAA,                "overall billing status
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        NAME1 LIKE KNA1-NAME1,                "ship-to customer name
        ORT01 LIKE KNA1-ORT01,                "ship-to address
        REGIO LIKE KNA1-REGIO,                "ship-to region (state)
        LAND1 LIKE KNA1-LAND1,                "ship-to country
      END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ZDATE1 LIKE VBEP-EDATU,               "requested date
        ZDATE2 LIKE VBEP-EDATU,               "scheduled date (confirm)
        ZDATE3 LIKE VBEP-EDATU,               "committed date
        ZQTY1 LIKE VBAP-KWMENG,               "qty ordered
        ZQTY2 LIKE VBEP-BMENG,                "backlog qty
        ZEXTD LIKE VBAP-NETWR,                "backlog net value
        ZDESC(30) TYPE C,                     "backlog description
      END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
        WADAT LIKE VBEP-WADAT,                "planned goods issue date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
        BMENG LIKE VBEP-BMENG,                "qty confirmed
      END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
      END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ROMS1 LIKE VBEP-WMENG,                "committed qty
      END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
        VGBEL LIKE LIPS-VGBEL,                "sales document
        VGPOS LIKE LIPS-VGPOS,                "sales document item
        VBELN LIKE LIKP-VBELN,                "delivery number
        POSNR LIKE LIPS-POSNR,                "delivery item number
        WADAT LIKE LIKP-WADAT,                "planned GI date
        WADAT_IST LIKE LIKP-WADAT_IST,        "actual GI date
        LFIMG LIKE LIPS-LFIMG,                "actual qty delivered
        ERDAT LIKE LIKP-ERDAT,                "date created
        ERZET LIKE LIKP-ERZET,                "time created
      END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
        VBELV LIKE VBFA-VBELV,                "sales document
        POSNV LIKE VBFA-POSNV,                "sales document item
        VBELN LIKE VBFA-VBELN,                "delivery number
        POSNN LIKE VBFA-POSNN,                "delivery item
        VBTYP_N LIKE VBFA-VBTYP_N,            "document category
        RFMNG LIKE VBFA-RFMNG,                "qty delivered
        PLMIN LIKE VBFA-PLMIN,                "plus/minus flag
      END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG,          "order qty
      CONF_QTY LIKE VBEP-BMENG,          "confirmed qty
      NOCONF_QTY LIKE VBEP-BMENG,        "qty not confirmed
      DELV_QTY LIKE VBEP-WMENG,          "qty delivered
      NODELV_QTY LIKE VBEP-WMENG,        "qty not delivered
      REMAIN_QTY LIKE VBEP-WMENG,        "qty remain to get conf date
      REQ_DATE LIKE VBEP-EDATU,          "request date
      COM_DATE LIKE VBEP-EDATU,          "committed date
      DELV_QTY1 LIKE VBEP-WMENG,         "preceding delivery qty
      REMAIN_QTY1 LIKE VBEP-WMENG,       "qty remain to get reqest date
      REMAIN_QTY2 LIKE VBEP-WMENG,       "qty remain to get commit date
      THIRD_QTY LIKE VBEP-WMENG,         "3rd party no PO qty
      SO_STOCK LIKE MSKA-KALAB,          "sales order stock
      ZPRICE LIKE VBAP-NETPR,            "unit price USD
      ADRS1(40) TYPE C,                  "concatenated city and region
      ADRS2(45) TYPE C,                  "city, region and country
      ADRS3(80) TYPE C,                  "name, city, rgn, ctry
      ZCNTR TYPE I.                      "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
    MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA INTO TABLE TVBPA
     WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA APPENDING TABLE TVBPA
      WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
    CLEAR ITAB0.
    MOVE TVBPA-VBELN TO ITAB0-VBELN.
    APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
      VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
      VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
      VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
      VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
    FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
        VBUP~POSNR = VBAP~POSNR
      INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
        VBKD~POSNR = VBAP~POSNR
      INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
    INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
    WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
      VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
      VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
      VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
      VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
      VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
    IF NOT S_KUNWE IS INITIAL.
      CLEAR TVBPA.
      READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
        POSNR = ITAB-POSNR PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
          POSNR = '000000' PARVW = 'WE'.
      ENDIF.
      MOVE TVBPA-KUNNR TO ITAB-KUNWE.
    ELSE.
      CLEAR ITAB-KUNWE.
      SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
          WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
            PARVW = 'WE'.
      ENDIF.
    ENDIF.
    IF NOT ITAB-KUNWE IN S_KUNWE.
      DELETE ITAB.
      CONTINUE.
    ENDIF.
get ship-to customer address info
    SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
      INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
      WHERE KUNNR = ITAB-KUNWE.
    MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
    AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
    AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
    AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
    IF ITAB-LFGSA = 'A'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select schedule lines for SO item and write to internal table itab2a
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2A BY WADAT.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      ORDR_QTY = 0.
      CONF_QTY = 0.
      NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
      LOOP AT ITAB2A.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      LOOP AT ITAB2A WHERE BMENG <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING ITAB2A-BMENG REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING ITAB2A-BMENG COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = ITAB2A-WADAT.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = ITAB2A-BMENG.
        ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDLOOP.
get request date for SO item
      IF NOCONF_QTY <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NOCONF_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NOCONF_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NOCONF_QTY.
        ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
    FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
      LIKP-ERDAT, LIKP-ERZET)
    WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
    CLEAR LIPS.
    SELECT POSNR VGBEL VGPOS LFIMG
      FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
      WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
      CLEAR VBUP.
      SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
        WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
      IF VBUP-WBSTA = 'A'.
        CLEAR ITAB3.
        ITAB3-VGBEL = LIPS-VGBEL.
        ITAB3-VGPOS = LIPS-VGPOS.
        ITAB3-VBELN = LIKP-VBELN.
        ITAB3-POSNR = LIPS-POSNR.
        ITAB3-WADAT = LIKP-WADAT.
        ITAB3-WADAT_IST = LIKP-WADAT_IST.
        ITAB3-LFIMG = LIPS-LFIMG.
        ITAB3-ERDAT = LIKP-ERDAT.
        ITAB3-ERZET = LIKP-ERZET.
        APPEND ITAB3.
      ENDIF.
    ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
    CLEAR ITAB.
    READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
    IF SY-SUBRC <> 0.
      IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
        ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
        ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
        ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
        ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
        CLEAR ITAB1.
        ITAB1-KUNNR = ITAB-KUNNR.
        ITAB1-KUNWE = ITAB-KUNWE.
        ITAB1-VBELN = ITAB-VBELN.
        ITAB1-POSNR = ITAB-POSNR.
        IF ITAB-KURSK = 0.
          ITAB-KURSK = 1.
        ENDIF.
        IF ITAB-KPEIN = 0.
          ITAB-KPEIN = 1.
        ENDIF.
select delivery qty for SO item and write to internal table
        SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
          FROM VBFA INTO TABLE ITAB4
          WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
            ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
        DELV_QTY = 0.
        DELV_QTY1 = 0.
        LOOP AT ITAB4.
          IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
              ITAB-AUART = 'KR').
            IF ITAB4-PLMIN = '-'.
              ITAB4-RFMNG = ITAB4-RFMNG * -1.
            ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
            CLEAR LIKP.
            SELECT SINGLE ERDAT ERZET
              FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
              WHERE VBELN = ITAB4-VBELN.
            IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
                AND LIKP-ERZET < ITAB3-ERZET ).
              DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
            ENDIF.
            DELV_QTY = DELV_QTY + ITAB4-RFMNG.
          ENDIF.
        ENDLOOP.
get request dates for SO item
        REFRESH ITAB2B.
        SELECT EDATU VBELN POSNR WMENG
          FROM VBEP INTO TABLE ITAB2B
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            WMENG <> 0.
select sched lines w/commit date and write to itab2c
        REFRESH ITAB2C.
        SELECT EDATU VBELN POSNR ROMS1
          FROM VBEP INTO TABLE ITAB2C
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            ROMS1 <> 0.
        SORT ITAB2B BY EDATU.
        SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY1 = DELV_QTY1.
        LOOP AT ITAB2B.
          IF ITAB2B-WMENG > REMAIN_QTY1.
            ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
            MODIFY ITAB2B.
            EXIT.
          ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
            DELETE ITAB2B.
            EXIT.
          ELSE.
            REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
            DELETE ITAB2B.
          ENDIF.
        ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY2 = DELV_QTY1.
        LOOP AT ITAB2C.
          IF ITAB2C-ROMS1 > REMAIN_QTY2.
            ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
            MODIFY ITAB2C.
            EXIT.
          ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
            DELETE ITAB2C.
            EXIT.
          ELSE.
            REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
            DELETE ITAB2C.
          ENDIF.
        ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
        IF ITAB3-WADAT <> 0.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = ITAB3-WADAT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue'.
        ELSE.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = '99991231'.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue date'.
        ENDIF.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
      AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
      AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
      AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
    IF ITAB-LFGSA = 'B'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select delivery qty for SO item and write to internal table
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
            ITAB-AUART = 'KR').
          IF ITAB4-PLMIN = '-'.
            ITAB4-RFMNG = ITAB4-RFMNG * -1.
          ENDIF.
          DELV_QTY = DELV_QTY + ITAB4-RFMNG.
        ENDIF.
      ENDLOOP.
select schedule lines for SO item and write to internal table
      REFRESH ITAB2A.
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY1 = DELV_QTY.
      LOOP AT ITAB2B.
        IF ITAB2B-WMENG > REMAIN_QTY1.
          ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
          MODIFY ITAB2B.
          EXIT.
        ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
          DELETE ITAB2B.
          EXIT.
        ELSE.
          REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
          DELETE ITAB2B.
        ENDIF.
      ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY2 = DELV_QTY.
      LOOP AT ITAB2C.
        IF ITAB2C-ROMS1 > REMAIN_QTY2.
          ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
          MODIFY ITAB2C.
          EXIT.
        ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
          DELETE ITAB2C.
          EXIT.
        ELSE.
          REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
          DELETE ITAB2C.
        ENDIF.
      ENDLOOP.
       ORDR_QTY = 0.
       CONF_QTY = 0.
       NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
      LOOP AT ITAB2A.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
      REMAIN_QTY = DELV_QTY.
      LOOP AT ITAB2A.
        IF ITAB2A-BMENG <> 0.
          IF ITAB2A-BMENG <= REMAIN_QTY.
            REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
          ELSE.
            ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
            PERFORM GET_REQUEST_DATE TABLES ITAB2B
              USING ITAB2A-BMENG REQ_DATE.
            PERFORM GET_COMMIT_DATE TABLES ITAB2C
              USING ITAB2A-BMENG COM_DATE.
            ITAB1-ZDATE1 = REQ_DATE.
            ITAB1-ZDATE2 = ITAB2A-WADAT.
            ITAB1-ZDATE3 = COM_DATE.
            ITAB1-ZQTY1 = ITAB-KWMENG.
            ITAB1-ZQTY2 = ITAB2A-BMENG.
            ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
            ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
            ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
            IF ITAB-AUART = 'KR'.
              ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
              ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
              ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
            ENDIF.
            APPEND ITAB1.
            REMAIN_QTY = 0.
          ENDIF.
        ENDIF.
      ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
      IF NOCONF_QTY >= NODELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NODELV_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NODELV_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NODELV_QTY.
        ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
    AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
    AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
    AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
    IF ITAB-FKSAA <> 'C'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
      REFRESH ITAB4.
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-PLMIN = '-'.
          ITAB4-RFMNG = ITAB4-RFMNG * -1.
        ENDIF.
        DELV_QTY = DELV_QTY + ITAB4-RFMNG.
      ENDLOOP.
loop thru PO's for SO item
      LOOP AT ITAB4.
select delivery lines for PO item
        SELECT EINDT EBELN EBELP MENGE FROM EKET
          INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
          WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING EKET-MENGE REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING EKET-MENGE COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = EKET-EINDT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = EKET-MENGE.
          ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
          ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
          ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
          APPEND ITAB1.
        ENDSELECT.
      ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
      IF DELV_QTY < ITAB-KWMENG.
        THIRD_QTY = ITAB-KWMENG - DELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING THIRD_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING THIRD_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE2 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = THIRD_QTY.
        ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
        APPEND ITAB1.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
    DESCRIBE TABLE ITAB1 LINES ZCNTR.
    IF ZCNTR = 0.
      WRITE: / 'No Data Found for Selection'.
      STOP.
    ENDIF.
    SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
    LOOP AT ITAB1.
      IF ITAB1-ZDATE1 = SPACE.
        ITAB1-ZDATE1 = '99991231'.
      ENDIF.
      IF ITAB1-ZDATE3 = SPACE.
        ITAB1-ZDATE3 = '99991231'.
      ENDIF.
get SO item detail
      CLEAR ITAB.
      READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
                               POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
      AT NEW KUNWE.
        CLEAR KNA1.
        SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
          WHERE KUNNR = ITAB1-KUNNR.
        CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
        CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY '   '.
        CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY '   '.
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
          56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
        FORMAT RESET.
        SKIP.
      ENDAT.
print out backlog detail
      CLEAR T171T.
      SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
        WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
      WRITE: /1 ITAB1-VBELN,
        13(6) ITAB1-POSNR NO-ZERO,
        21 ITAB-MATNR,
        41 ITAB-ARKTX,
        83 ITAB1-ZDATE1,
        95 ITAB1-ZDATE3,
        107 ITAB1-ZDATE2,
        119 ITAB-ERNAM,
        129 ITAB-BZIRK, 135 T171T-BZTXT,
        157(20) ITAB-BSTKD,
        179(12) ITAB1-ZQTY1 DECIMALS 0,
        193(12) ITAB1-ZQTY2 DECIMALS 0,
        207(16) ITAB1-ZEXTD DECIMALS 2,
        225 ITAB1-ZDESC.
      AT END OF VBELN.
        SKIP.
      ENDAT.
print footing at ship-to customer
      AT END OF KUNWE.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
          25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
        SKIP 2.
      ENDAT.
      AT LAST.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED ON.
        WRITE: /1 'Report Total:',
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
      ENDAT.
    ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
                      USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    REQ_DATE = SPACE.
    EXIT.
ELSE.
    REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    FTAB-WMENG = REMAIN.
    MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE FTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE FTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + FTAB-WMENG.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE FTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      FTAB-WMENG = REMAIN.
      MODIFY FTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
                      USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    COM_DATE = SPACE.
    EXIT.
ELSE.
    COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    CTAB-ROMS1 = REMAIN.
    MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE CTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE CTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + CTAB-ROMS1.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE CTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      CTAB-ROMS1 = REMAIN.
      MODIFY CTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT.

How to get the Memory Utilization Data for Cloud Service

Similar Messages

Maybe you are looking for