How to get the method names in a class

hi friends,
Could any of you tell me the report or function module to display all the method names in a given class.
thanks in advance.
regards,
kumar

Hi Kumar ,
Open ur class in SE24 transaction ,there is a tab for methods ..
u'll get the list of methods form there ... n in source u'll get their operative details
Regards
Renu

Similar Messages

How to get the function name in controller class

Hi experts ,
I am new to the OAF framework.
i have created the two functions and bot he the function have the same controller class .i want to capture the function name or function id in the controller class.
can you please let me know how to get the function id or function name in the controller class.

Hi apurba,
Thanks for the quick reply.
i am trying to get the function name from the FunctionSecurity class,
However in FunctionSecurity class there is no such method defined as getFunctionName();
my requirement is ,i have two functions functionA and functionB defined.
both the function has the same controller class.in controller class ,i need to get the function name ,based on the function name
i will redirect the page to respective page.
looking forward for you response.
appreciate your help
Thanks,
KT

Junit : How can I get the method name (say testMyAddress) that failed

My code is below
          TestSuite masterSuite = new TestSuite(testClass);
          TestResult result = new TestResult();
          masterSuite.run(result);
               Enumeration errors = result.errors();
               while (errors.hasMoreElements())
                    TestFailure error = (TestFailure)errors.nextElement();
                    Test test = error.failedTest();
/*will give me the class name but how can I get the method that threw the exception.
I can get fName (that contains the method name) field to get the method,but being private I cannot hold of the field.
Wondering if there is any easy way to get the method name that threw exception,without writing unneccessary code
                    Class c1 = test.getClass();
thx
m

getting all methods is no good!
My test class looks like this
MyTestClass{
testGoodData(){
asserttrue(.....);
testBadData(){
asserttrue(.....);
testNullData(){
asserttrue(.....);
someHelperMethod(){
thx
m

IDM : How to get the Resource name in Exclude Rule during Reconciliation?

Hi
Problem Statement => How to get the Resource name in Exclude Rule during Reconciliation.
Problem Description => Apparently, we use exclude rule for not consider some account during reconciliation.
I need the resource name in exculde rule during reconciliation. I tried with getResources() method which is an inbuilt method.But it gives all the resources are aviablable in the repository (IDM). I need only the current reconcilied resource name instead of fetching all the resouce.
Can any one please help how to get the resource name in exclude rule during reconciliation?
Thanks in advance for you help.
Thanks,
Chellappan

Hi,
Thanks for your reply.
I have 50 resouces and these resouces using the same kind of exclude rules. In the exclude rule, i am using resource name to do some work. If i get the resouce name in exclude rule, then i can use the same exculde rule for 50 resources. This will minimise the rule count from 50 to 1. For that, i need resouce name.
Thanks,
Chellappan Sampath.

Get the method name

hi
can anyone know how to get the name of method from its catch block.
For example
i have a class called Hello.java
and inside that a method called display();
and i have a written the code inside a try catch block.so when an exception occurs i want to create a log file
i got the class name using this.getClass().getSimpleName()
so is there any way to get the method name , where the catch is written. (here in example i should get it as "display")
plz help me
im in great need.
hope u understood my doubt.
rgds

Use a logging framework, and name the loggers well & use meaningful messages?
Or create a Throwable, [fill in|http://java.sun.com/javase/6/docs/api/java/lang/Throwable.html#fillInStackTrace()] the stack trace, get the required StackTraceElement and [get the method|http://java.sun.com/javase/6/docs/api/java/lang/StackTraceElement.html#getMethodName()] from this.

How do I get the directory name that a class is located in?

How do I get the directory name that a class is located in? I have a class located under /com/dhcmc and I want to be able to retrieve the "/com/dhcmc" that the class is residing under so that I can then use this directoy name to build a relative path name for the other directories supporting the application such as the images directory etc i.e.
|---com
|   \---dhcmc       (my class resides here)
|       +---images (supporting app dirs under the class dir)
|       +---config (supporting app dirs under the class dir)

You can try the methods.
Class.getClassLoader()
Class.getResourceAsStream()
Class.getResource()
You probably wont get the complete directory path, but you might
be able to load the files relative to your classes directory.

How to get the Text name to pass in the parameter header in save_text

Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnan

Hi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How to get the VARIANT name in the program

Hi Guys,
Can somebody tell me how to get the VARIANT name in a program.
I have to perform some code with specific variant only. So I want to check in program which variant has been used to call the program.
Thanks,

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

How to get the role name in which query is published ?

Hi Experts,
Is there any table where i can get the name of the role in which a particular query is published. I know that if i have a role , i can check in pfcg giving that role name and in menu tab i can see all the queries published under that role. But if i know query but not role how to get the role name . Is there any table or functon modules or programs to get the information.
Thanks & Regards
Vamsi Kiran

Check this table
AGR_HIER

How to get the field name of an internal table during runtime?

How to get the field name of an internal table during runtime?

Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
    <b> DATA: v_field(60).                        " Insert this code.
     GET CURSOR FIELD v_field.        " Insert this code.</b>
     <b>CHECK v_field = 'ITAB-KUNNR'.    " Insert this code. (or)
Write: v_field.</b>
Regards,
Ramganesan K.

How to get the column names of the table into the Dashboard prompt

how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore P

Hey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM

How to get the function name/ID of the current page

HI,
I searched the forum and google, but it is not clear on how to get the function name of the current page.
I have 4 functions in my self service A ,B,C,D (seeded page links ) they all have to go to a page called hhhPG. Based on which function user is clicks I have to show the data in hhhPG.
so my question is how to get the function name ? I mean I need to know if user click on link A , B, C or D link and came to this page.
I found below in one forum and also there is getfunctionID in pageContext , but I do not know what to pass to getfunctionid("???") to get value.
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
Or is there a better way of know where user is coming from ? like geturl....
Please help, I need this ASAP.
Thank you.

Use below to find out how the user came into the page
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
boolean isFunc2 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME2"));
boolean isFunc3 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME3"));
boolean isFunc4 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME4"));
So one of them will be true based on the function the user came in.
Write your logic based on these flags.
Regards,
Peddi.

In Mac how to get the Full name of a file Programmatically?

Hi Friends,
I am doing one Mac application for displaying the contents of a file. I can able to get some information about the file by using this code below...
NSDictionary *dict=[fileManager attributesOfItemAtPath:myPath error:nil];
Now I want to get the some other informations also like Full Name, copyRight, version... So Please suggest me how to get the full name of a file Programmaticallly?

Your question doesn't make sense.
First off, if you are going to get the attributes of a file, you need its full name before you can do anything. So that's part one taken care of.
This function returns a dictionary full of typical file information (type, size, mod dates, etc.) as well as some HFS data (creator code, type code) which, I strongly suspect, are not "pulled out of the file" but rather generated on the spot. (See NSFileManager for the full list of attribute keys.)
The other items you hoped of retrieving are not part of the regular file system. Sure, a Truetype font has a copyright string and a version, but what about an HTML file? A PNG? A text file you just created?
There simply are no standard functions to retrieve copyright and version.

How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh

How to get the method names in a class

Similar Messages

Maybe you are looking for