How to get the name of color from the Color Object??

hi all,
i want to get the color name from the Color Object i.e say if the Color object is something like
c=new Color(128,128,128);
I should be a able to say this object is of gray color dynamically
Can anyone help???

You can't do this. There is no label for a color - what is 0x439803 called? 'Mud?' 'Rustic sludge?' 'Poo brown?' - and then that's just English, it might need to be 'Brun de Kaka' or something.
If you want to check against a certain predefined color you could do the following,
if (Color.GRAY.equals(myColor))Otherwise you'll have to write your own code to label colors.

Similar Messages

I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

Restore the backup of your iPhone 5 to your iPhone 4. It will contain your camera roll photos.
To do this, first make sure the iPhone 4 is running the same or higher version of iOS as your iPhone 5 was. If it isn't, you'll need to update it first. Then, to restore the iCloud backup, you'll have to begin by erasing the iPhone 4. If you have any newer data on the iPhone 4 that is not contained in the iPhone 5 backup, you'll need to save that first. When you're ready, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the set screens on the iPhone 4 and when given the option, choose Restore from iCloud backup and follow the prompt, choosing the backup of your iPhone 5 to restore to. Be sure it is connected to wifi and your charger as it is restoring the backup.

How to get server data without reading from the socket stream?

My socket client checks for server messages through
            while (isRunning) { //listen for server events
                try {
                        Object o = readObject(socket); //wait for server message
                            tellListeners(socket, o);
                } catch (Exception e) {
                    System.err.println("ERROR SocketClient: "+e);
                    e.printStackTrace();
                try { sleep(1000); } catch (InterruptedException ie) { /* ignore */ }
            }//next client connectionwith readObject() being
    public Object readObject(Socket socket) throws ClassNotFoundException, IOException {
        Object result = null;
System.out.println("readObject("+socket+") ...");
        if (socket != null && socket.isConnected()) {
//            ObjectInputStream ois = new ObjectInputStream(socket.getInputStream());
            ObjectInputStream ois = new ObjectInputStream(new DataInputStream(socket.getInputStream()));
            try {
                result = ois.readObject();
            } finally {
//                socket.shutdownInput(); //closing of ois also closes socket!
    //            try { ois.close(); } catch (IOException ioe) { /* ignore */ }
        return result;
    }//readObject()Why does ois.readObject() block? I get problems with this as the main while loop (above) calls readObject() as it's the only way to get server messages. But if i want to implement a synchronous call in adition to this asynchronous architecture (call listeners), the readObject() call of the synchronous method comes to late as readObject() call of the main loop got called before and therefore also gets the result of the (later) synchronous call.
I tried fideling around with some state variables, but that's ugly and probably not thread safe. I'm looking for another solution to check messages from the server without reading data from the stream. is this possible?

A quick fix:
- Add a response code at the beginning of each message returned from the server indicating if the message is a synchronous response or a callback (asynch);
- Read all messages returned from the server in one thread and copy callback messages in a calback message queue and the synch responses in an synch responses queue;
- Modify your synchronous invocation to retrieve the response from the responses queue instead from the socket. Read the callback messages from the corresponding queue instead from the socket.
Also take a look at my website. I'm implementing an upgraded version of this idea.
Catalin Merfu
High Performance Java Networking
http://www.accendia.com

How to get a Previously purchased app from the App Store from a different account on the same computer?

Recently had to replace my hard drive and some info has gone missing. An App from the App Store for one. How can I get it back now that I have a new account? It wont let me sign on with the old one anymore.

There's no need to create a new Apple ID just because the hard drive was replaced.
Apps can only be re downloaded using the same Apple ID they were purchased with originally.
You will have to re purchase the app using the new Apple ID.

How can i change the name in imessage from the full email address used as apple id on ipod touch?

I used my full email address to create an apple id - but on imessage it uses my apple id as my name as sender + i dunno how to change it so ppl dont get a messsage showing my full email address!
Can anyone help?

Open the Contacts app. List All Contacts and find the email address used by iMessage. Select the email address and tap the Edit button in the top right corner. Add your name to the top two lines. Tap Done.

How to get event name in runtime in the method ?

i found that there is a &_WORKITEM.OBJECTTYPE.EVENTS.NAME& element in thw workflow contained. then i do a binding from this element to another element with the same type as &_WORKITEM.OBJECTTYPE.EVENTS.NAME&.
then in the method i use swc_get_element container 'NAME' name.
to get the event name in runtime.
but when i test it in SWUE, it gives error. If i remove this statement, it is oK
ANY advice?

Hello Gang,
_WORKITEM is a workitem object
OBJECTTYPE is its type (WORKINGWI for dialog steps)
EVENTS is a multiline attribute (all events for this type of object: processed, created and deleted in our case /events of WORKINGWI/)
I don't think that is what you need.
You got an error, cause you link a multiline element to a single one.
If you need an access to the TRIGGERING event name, the best is to bind an event name when it is triggered (or e.g. check an event name in the check FM if it is sufficient for your requirement).
Regards,
Michal

How to get my usernames to appear from the drop down box then password automatically put in?

=( ugh...
I used to have my settings where it remembered my user name from the drop down box - so I would just type the first letter of my user name and a drop down box would appear and I could just click on my user name for that particular site and my password would automatically fill in...
I changed something the other night and can't remember what the heck I did... now it won't remember ANY user name OR password or like on face book it has my user name and password there automatically when I open up the log in face book page.
So I would like to know if anyone knows what needs to be clicked and unclicked to make it so:
I start typing my user name and the drop down box appears with user names and then my password automatically fills.. I DO NOT want all my user names and passwords already IN the forms when I first open the website... but for me to actually type in a letter and then it fills it... like it used to =(
/cry
why do I touch stuff?
Anyway I hope someone can help me because I am going nuts trying to figure it out and think I'm goofing things up even more =/
I have firefix 3.6.10

Does this help?
* http://kb.mozillazine.org/Password_only_filled_after_entering_user_name
* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"

How to get ringtones on my iphone4 from the music on my phone

I make the ringtones and have to email them to myself but still don't know how to get them on my phone to be able to use.

In case you don't know, ringtones use a different format then songs. When you say "I make the ringtones", you need to have used an appropriate utility to do that.
Assuming you did, then place those ringtones into the "Tones" section on iTunes on your computer, and sync your iPhone using iTunes, making sure you have the right rule set up so your tones get synced.

How to get Database name/IP address of the database server from forms10g

Hi everybody,
How do I get the database instance name and IP address of the database server?
I am using Foms 10g and the database server is Oracle 10g.
Sukanta

Dear...........
Plz use this code
select SYS_CONTEXT('USERENV', 'IP_ADDRESS', 15) ipaddr from dual;
SELECT utl_inaddr.get_host_address IP ,UTL_INADDR.get_host_name NAME FROM dual;
select SYS_CONTEXT('USERENV', 'HOST') HELLO from dual;
select SYS_CONTEXT('USERENV', 'TERMINAL') HELLO from dual;
select SYS_CONTEXT('USERENV', 'OS_USER') HELLO from dual;
SELECT SYS_CONTEXT ('USERENV', 'SESSION_USER') FROM DUAL;
SELECT SYS_CONTEXT ('USERENV', 'DB_UNIQUE_NAME') FROM DUAL;
thx.

How to get Solaris 10 to boot from the CLI instead of the GUI?

I tried searching on the site but was unable to get useful information from setting up Solaris such that it boots to command prompt instead of the GUI. Any help or suggestions would be appreciated.

This will also work if you're running out-of-the box Solaris 10:
svcadm disable graphical-login/cde-login:defaultThe problem with doing it that way is you then can't use your Solaris host to run SunRay thin clients. If you need to use the box as a SunRay server, you'll have to remove the reference to the :0 display somewhere in /etc/dt/config/Xconfig, IIRC.

How to get column names as value in the target table ?

Hello All,
I want your help to solve my problem. Any suggestions are welcomed.
Problem - I have source data in Microsoft Excel in following format,
Ids q12 q13 q14
10001 1 1 2
10002 2 4 1
In my target table , which is in Oracle i want data in following format,
IDs Question Answer
10001 q12 1
10001 q13 1
10001 q14 2
10002 q12 2
10002 q13 4
10002 q14 1
In table i have q12, q13, q14 as column names, Now i want to fill q12, q13,
q14 as values of one of the column ( Question ) in my target table.
Note - I don't want to hard code the values ... is there any way i achieve this?
Thanks in Advance.
AC

1. Create a staging table with 4 columns. Ids,q12,q13 and q14
2. Create a main table in the format you want ie., Ids, question and answer
3. Load the Excel after converting into CSV using SQLLDR into the staging table.
4. Then move the data from staging to main as below
insert into main(ids,question,answer)
(select ids,'q12',q12 from table1
union all
select ids,'q13',q13 from table1
union all
select ids,'q14',q14 from table1)There might be someother easier way to achieve this. But i dont think you can use SQLLDR to load the data denormalized like you have mentioned. But you can write a procedure which reads the file using UTL_FILE and insert into the table.
Message was edited by:
Mohana Kumari

My boyfriend purchased the new operating system for the mac book pro it was send to his email but we cant figure out how to get it and download it from the email

how do we download our operating system purchase from our email it was sent to?

You should have received a redemption code via email if you purchased Lion or Mountain Lion that would allow you to download the OS via the Mac App Store. If you purchased an earlier version it would come on discs, usually model-specific.
Call back with some more information...
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

How to get an UPDATABLE REF CURSOR from the STORED PROCEDURE

using C# with
ORACLE OLE DB version: 9.0.0.1
ADO version: 2.7
I returns a REF CURSOR from a stored procedure seems like:
type TCursor is ref cursor;
procedure test_out_cursor(p_Dummy in varchar, p_Cur out TCursor) is
begin
open p_Cur for select * from DUAL;
end;
I create an ADO Command object and set
cmd.Properties["IRowsetChange"].Value = true;
cmd.Properties["Updatability"].Value = 7;
cmd.Properties["PLSQLRSet"].Value = 1;
cmd.CommandText = "{CALL OXSYS.TEST.TEST_OUT_CURSOR(?)}";
and I use a Recordset object to open it:
rs.Open(cmd, Missing.Value,
ADODB.CursorTypeEnum.adOpenStatic,
ADODB.LockTypeEnum.adLockBatchOptimistic,
(int) ADODB.CommandTypeEnum.adCmdText +
(int) ADODB.ExecuteOptionEnum.adOptionUnspecified);
The rs can be opened but can NOT be updated!
I saved the recordset into a XML file and there's no
rs:baseschema/rs:basetable/rs:basecolumn
attributes for "s:AttributeType" element.
Any one have idea about this?
thanks very much

It is not possible through ADO/OLEDB.
Try ODP.NET currently in Beta, it is possible to update DataSet created with refcursors. You need to specify your custom SQL or SP to send update/insert/delete.
As I remember there is a sample with ODP.NET Beta 1 just doing this.

How to get a disc to eject from the portable disc drive

I have a CD in the disc drive and when I click on the reject it tells me that it has already ejected it and won't let me force eject either.

Without knowing the specific drive you are having problem with maybe some of the suggestions here will help.
How force eject disc: Apple Support Communities
Mac Mini: Eject DVD Apple Support Communities

I am trying to edit track names and genres from the library in iTunes, but the Get Info window has everything in grey, so I cannot edit anything. How do I edit?

I am trying to edit track names and genres from the library in iTunes, but the Get Info window has everything in grey, so I cannot edit anything. How do I edit? Any ideas?

I have the same problem since I installed iTunes 11.1.0.126.

How to get column names for a specific view in the scheme?

how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How to get the name of color from the Color Object??

Similar Messages

Maybe you are looking for