How to get the name of the attachment in Sender Mail Adaper?
hi mates,
I've scenario a where in I need to pick up a mail with an attachment and change its extension and send it to target system using file adapter.
I'm able to pick up the mail with attachment using sender mail adapter but not able to get the name of the attachment so that I can use it in mapping or on the adapter configuration. How do I read the name of the attachment and manupulate it?
I looked at the thread sender mail adapter - attachment name But the solution is not described. I think Stefan is talking about the SP!2 for PI 7.0. I'm on XI 3.0 what is the equivalent SP for that, SP20? Stefan, can you please throw me more light on it?
I appreciate your valuable inputs
thx in adv
praveen
Thanks Aamir.
Earlier I replied to that thread asking for more details...but did not see the response...
anyways, thanks for your quick help..
but I wonder abt the PI SP12/ XI SP20 pre-requisite. We can have adapter modules on SPs lower than PI SP12/XI SP20 as well, can we not?
thanks
praveen
Similar Messages
-
How to get file name of the form attachment?
Hi,
is there anybody who is able to help me with the following problem???
I started my process from Workspace ES and as a first step I attached one locale file (IMG.JPG or IMG.TIF e.g.) as a form attachment. I used "Attachments" bookmark in the Workspace ES.
I need to get file name of attached file in the process!!!
I tried to use "getTaskAttachments" component to get file name of form attachment but without success. This component successfully obtained attached file an stored it in the variable (type list, subtype document) but didn't produce all file attribute informations such as basename or Content Type:
Is there some possibility to obtain file name (including file extension) by using "standard" tools and components of ALC?
Thanks for your suggestions.Hi LekomDev,
I faced the same situation some time back and this is what I know.
Based on the file type few of the attributes will or will not be populated. (This is what the official documentation says about Document attributes)
The file name that you are looking for would mostly be in 'name' attribute of Document object. The 'wsfilename' attribute is the atrribute which gets used to show the file name into Attachments tab of the workspace.
So, if you are just interested in knowing the filenames then 'name' attribute is the place that you are looking for.
But if you are trying to solve an issue in which Attachments against a Task isn't showing the filenames properly then you would need to copy the 'name' attribute value into 'wsfilename' attribute and then the Attachmetns against a Task would have the correct names.
Tip: Use the Record and Playback option of the workbench to inspect the Document variable and you would see all of the values for a Document variable at desired step in your orchestration.
hope this helps,
cheers,
Parth Pandya
Blog: http://livecyclekarma.wordpress.com -
How to get domain name for the userId?
There is a generic way to get userID
System.getProperty( "user.name" ).
In case of windows it's a name you login in.
Is any way in Java to figure out domain name of that particular user by Java code?
IgorYou can dojava.net.InetAddress.getLocalHost().getHostName()to get the name of the computer. But this will not give you the "domain name of the user". In Windows, for example, when I sign on to my computer, that user name only means something to my computer. There's no "domain", in the Internet sense, involved.
-
How to get my Name in the From Field instead of email address?
For an Exchange Activesync account, how do you get your friendly "Name" to show in the From: field rather than email address ([email protected])?
I seem to be able to do this fro IMAP/POP accounts but not Exchange Activesync.
All the discussions I've found about gmail and Activesync seem to be centered on getting your messages to show a different return email address than your exchange account. I'm not looking for this, just to show the Name.
ThanksIf you add a contact ("Contacts app>> "+">> enter info) with that email address, it will appear in mail with whatever name you set in the email address' contact.
-
How to get a name of the current marker?
I have two director files with same identical marker names (2
language versions). How I can make a button that changes the
language (goes to the same marker of the other file). Something
like... go to "current marker name here" of movie
"language_2".ok, now the really cool method. You can get any marker name
whether it's
above the current frame or not.
mkrName = (the markerList)[(marker (0)).string]
will give you the marker above the current frame or the first
marker to the
left of the current frame if there is no marker above the
current frame.
Similarly,
mkrName = (the markerList)[(marker (1)).string]
will give you the first marker to the right of the current
frame whether
there is a marker above the current frame or not. You can see
how you can
get the name of any marker just by changing the parameter of
the marker ()
function.
If you're worried that the first example doesn't tell you
whether the marker
is above or behind the current frame a simple test will do.
if marker (0) = the frame then
-- this is true when the marker is on the current frame
end if
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"temes" <[email protected]> wrote in message
news:e4hate$ods$[email protected]..
>I have two director files with same identical marker
names (2 language
> versions). How I can make a button that changes the
language (goes to the
> same
> marker of the other file). Something like... go to
"current marker name
> here"
> of movie "language_2".
> -
How to get file name on the base of extension
hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khanHere's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching. -
How to get Resource Name in the Repository Service when Publish evt trigger
Hi ,
I have created a repository service in which I have registered the
StatemanagementEvent.PUBLISH
My requirement is I need to know which resource rather resource name triggered this event.
This is the code which
public class ApprovProcs extends AbstractRepositoryService implements IReconfigurable, IResourceEventReceiver
private static final String TYPE = "ApprovProcs";
private Collection repositoryManagers;
public ApprovProcs()
super();
// Do not add code here. Add it to startUpImpl() instead
public String getServiceType()
return ApprovProcs.TYPE;
protected void startUpImpl(Collection repositoryManagers) throws ConfigurationException, StartupException
// implement this method as follows:
// - Verify configuration data
// - Get references to other needed (global) services
// - Check whether other repository services (this service depends on) are also assigned to the repository managers
// - Usually the service registers itself for certain events at all repository managers
this.repositoryManagers = repositoryManagers;
Iterator it = repositoryManagers.iterator();
while (it.hasNext())
try
addRepositoryAssignment( (IRepositoryManager) it.next());
catch (ServiceNotAvailableException e)
e.printStackTrace();
protected void shutDownImpl()
Iterator it = repositoryManagers.iterator();
while (it.hasNext())
try
removeRepositoryAssignment( (IRepositoryManager) it.next());
catch (WcmException e)
e.printStackTrace();
protected void addRepositoryAssignment(IRepositoryManager mgr) throws ServiceNotAvailableException
// Implement this method: Usually the service registers itself for certain events at the repository manager.
try
// capture all the respurce which are published
mgr.getEventBroker().register( this, new StatemanagementEvent( StatemanagementEvent.PUBLISH, null ));
catch(WcmException e)
protected void removeRepositoryAssignment(IRepositoryManager mgr) throws WcmException
// Implement this method: Usually the service must unregister itself as an event handler.
//mgr.getEventBroker().unregister(this, new ResourceEvent(ResourceEvent.CREATE_COLLECTION, null));
mgr.getEventBroker().unregister( this, new StatemanagementEvent( StatemanagementEvent.PUBLISH, null ));
public void reconfigure(IConfiguration config) throws ConfigurationException
this.stateHandler.preReconfigure();
// check the new configuration data
try {
catch (ConfigurationException ex) {
this.stateHandler.postReconfigure(ex);
throw ex;
this.config = config;
this.stateHandler.postReconfigure();
public void received(IEvent event)
System.err.println( "----rid --42354543--- " );
IResource rsrPublished = (IResource)event.getParameter();
if( rsrPublished != null )
System.err.println( "----rid --42354543--- rsrPublished.getDescription() --- " + rsrPublished.getDescription() );
else
System.err.println( "Resource Does not exist -----" ) ;
In the log file I am getting Null Pointer Exception
Can any one please help me in this as where I am going wrong
thanks
pkHi Romano & Detlev ,
Thanks for the reply .
This is what I was looking
Detlev:
About the NPE ... in the above code I am not getting that.
Thats my mistake
Earlier I tried with
IResource rsrPublished = (IResource)event.getParameter();
String rid = rsrPublished.getRID().toString();
In the second line of code I was getting the NPE
after that I used to if condition to debug it
Sorry for the confusion...
One more thing
which is the event triggered for approval or how to capture the Approval Event when a content is approved by the Approver
thanks
pk -
How to get CLASS name for the generic item?
Hi,
I wrote following method to create a service instance.
public static <IType> IType GetServiceInstance()
IType type=null;
try
InitialContext ic=new InitialContext();
//ERROR: type= ic.lookup(IType.class.getName());
catch(Exception ex)
//do handle
return type;
}please see the //Error: here its giving error, also i m not getting "class" variable in IDE!!!
i want use like this;
IUserService userService=ServiceFactory.GetServiceInstance<IUserService>();so how can i do this?
Edited by: Manikandan.Java on Oct 31, 2007 3:02 AMI don't know if I understand your question, but you cannot find the class name because it is in run time just an object. You can, however, check if it is an instanceof.
if (genericType instanceof MyType) {
doMyThing();
} -
How to get host name in the workflow?
Hi,
I've a requirement where I need to get CQ Inbox url (http://<hostname>:<port>/inbox) in my custom workflow process. I thought of configuring url to some node and retriving from there.. but It's not the good approach as host name will be different for differnt CQ environments. So what is the best way of getting inbox url?
Env: CQ 5.6
Thanks
SivaYep Justin, If the configuration is wrong, any link generated would also be wrong.. I mean, default configuration will be some thing like..
I mean, I can change those configurations as per my instance host name, right?
Example: my instance's host url is: mytest:1501
So I would like to update the same in configurations .. -
How to get reference name in the class
i have a doubt in java.
class x
public String toString()
// code here i want
class y
p s v main(.....)
x servlets=new x();
x jsp=new x();
s.o.p(servlets);
s.o.p(jsp);
the result i want is :
hai servlets
hai jsp
what code to be in toString().You can't get hold of the variable name at runtime. If you want that output, you'll need to create it like this:
x servlets=new x("servlets");so that the x.toString() can know which string to print out.
Message was edited by:
johannef -
How to get functionID/Name of the current page
Hi guys,
I have two EBS standard forms "Supplier Entry" and "Supplier View Only" defined as two separate functions in the menu. Depending on which function was launched by the user I have to do some extension.
I found that following code can be used to know whether function is available in the menu or not. But the problem occurs in situation where both functions are available to the user and since the logic fail.
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
I need to know specifically which function was used to launch the form.
On the following post https://forums.oracle.com/message/10468620#10468620 Parag tell something like this
( "IMC_NG_ORG_CONTACTS".equals(pageContext.getParameter("ImcLandingFunction"))
but I don't know what "ImcLandingFunction" equates to in my scenario. I don't see AOL functions passing any parameters to forms.
or is there any other method to know?
Can anyone help?did you try these ones ? :
pageContext.getFormSubmitName();
pageContext.getFunctionId(); -
How to set dynamic name of the mail attachment according to source file ?
Hi,gurus:
Our scenario is like below:
Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
And another question:Must we restart the adapter or j2ee engine to make the user defined module work?Hi,
>>>but how can I get the source file name?
form dynamicconfiguration (ASMA)
>>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
no need for a restart
Regards,
Michal Krawczyk -
How to get column names for a specific view in the scheme?
how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10 -
How can i get my name on the finder bar?
How do i get my name on the top right corner next to the search bar? I have OS X Mountain Lion 10.8.5
System Preferences > Users & Groups
Click the lock to unlock it, if you have to.
Click "Login Options".
Enable " Show fast user switching menu as" and select "Full Name".
Best. -
now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)
The people who make that stuff have their own forums you can also search/ask in:
http://answers.microsoft.com/en-us/mac/forum
Maybe you are looking for
-
Best Practices For Portal Content Objects Transport System
Hi All, I am going to make some documentation on Transport Sytem for Portal content objects in Best Practices. Please help in out and send me some documents related to SAP Best Practices for transport for Portal Content Objects. Thanks, Iqbal Ahmad
-
Exchange Server 2013: Internal Certificate Issue
Dear All, I have MS Exchange 2013 with domain name: Exchange.local (fqdn: ex001.exchange.local). I had created the accepted domain for xyz.com. I bought the Wildcard Certificate for *xyz.com. I had issued the certificate to my MS Exchange server. Ext
-
Cant get my my ipod shuffle to load on to my imac computer
i cant seem to get my daughters ipod shuffle to be reconized to my imac computer. im not sure if its because the thing is dead. i alos didnt get a disc with the ipod i bought it off ebay about a year ago.im kinda stumped on this. please help. thanks!
-
my e-reader keeps formating on start up and I have to re-install all apps. When I put in overdrive, it asks for adobe sign in and now won't accept it. Does anyone know how to help me?
-
hello i was facing a problem with corrupted files when i updated arch with "pacman -Syu" command then i updated "pacman" and i saw there are two files /etc/pacman.d/ mirrorlist mirrorlist.pacnew so system is using mirrorlist, should i delete the