How to get the name of the selected building block in a building block content control?

Hello,
How can I obtain the name of the selected building block in a building block content control?
I want to use this together with an on exit-event to populate other content Controls depending on the name of the selected building block item.
Environment: Word 2010.
Thanks,
Peeter

Hi Peeter,
As far as I know the building block is the pre-built content, and the
BuildingBlock object represents a building block in a template. After add the building block to the document, it inserts the content to the document.
Building blocks are stored in the templates, therefore, to access the building blocks available for a document, we need to access an attached template.
So, I think, we can’t obtain selected building block in the document.
There are some links that may benefit you:
# BdingBlock Object (Word)
https://msdn.microsoft.com/en-us/library/office/ff192414.aspx?f=255&MSPPError=-2147217396
# Working with Building Blocks
https://msdn.microsoft.com/en-us/library/office/ff837878.aspx
# Set the Building Blocks That You Can Use for a Content Control
https://msdn.microsoft.com/en-us/library/office/ff197523.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to get domain name for the userId?

There is a generic way to get userID
System.getProperty( "user.name" ).
In case of windows it's a name you login in.
Is any way in Java to figure out domain name of that particular user by Java code?
Igor

You can dojava.net.InetAddress.getLocalHost().getHostName()to get the name of the computer. But this will not give you the "domain name of the user". In Windows, for example, when I sign on to my computer, that user name only means something to my computer. There's no "domain", in the Internet sense, involved.

How to get my Name in the From Field instead of email address?

For an Exchange Activesync account, how do you get your friendly "Name" to show in the From: field rather than email address ([email protected])?
I seem to be able to do this fro IMAP/POP accounts but not Exchange Activesync.
All the discussions I've found about gmail and Activesync seem to be centered on getting your messages to show a different return email address than your exchange account. I'm not looking for this, just to show the Name.
Thanks

If you add a contact ("Contacts app>> "+">> enter info) with that email address, it will appear in mail with whatever name you set in the email address' contact.

How to get a name of the current marker?

I have two director files with same identical marker names (2
language versions). How I can make a button that changes the
language (goes to the same marker of the other file). Something
like... go to "current marker name here" of movie
"language_2".

ok, now the really cool method. You can get any marker name
whether it's
above the current frame or not.
mkrName = (the markerList)[(marker (0)).string]
will give you the marker above the current frame or the first
marker to the
left of the current frame if there is no marker above the
current frame.
Similarly,
mkrName = (the markerList)[(marker (1)).string]
will give you the first marker to the right of the current
frame whether
there is a marker above the current frame or not. You can see
how you can
get the name of any marker just by changing the parameter of
the marker ()
function.
If you're worried that the first example doesn't tell you
whether the marker
is above or behind the current frame a simple test will do.
if marker (0) = the frame then
-- this is true when the marker is on the current frame
end if
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"temes" <[email protected]> wrote in message
news:e4hate$ods$[email protected]..
>I have two director files with same identical marker
names (2 language
> versions). How I can make a button that changes the
language (goes to the
> same
> marker of the other file). Something like... go to
"current marker name
> here"
> of movie "language_2".
>

How to get file name on the base of extension

hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khan

Here's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching.

How to get file name of the form attachment?

Hi,
is there anybody who is able to help me with the following problem???
I started my process from Workspace ES and as a first step I attached one locale file (IMG.JPG or IMG.TIF e.g.) as a form attachment. I used "Attachments" bookmark in the Workspace ES.
I need to get file name of attached file in the process!!!
I tried to use "getTaskAttachments" component to get file name of form attachment but without success. This component successfully obtained attached file an stored it in the variable (type list, subtype document) but didn't produce all file attribute informations such as basename or Content Type:
Is there some possibility to obtain file name (including file extension) by using "standard" tools and components of ALC?
Thanks for your suggestions.

Hi LekomDev,
I faced the same situation some time back and this is what I know.
Based on the file type few of the attributes will or will not be populated. (This is what the official documentation says about Document attributes)
The file name that you are looking for would mostly be in 'name' attribute of Document object. The 'wsfilename' attribute is the atrribute which gets used to show the file name into Attachments tab of the workspace.
So, if you are just interested in knowing the filenames then 'name' attribute is the place that you are looking for.
But if you are trying to solve an issue in which Attachments against a Task isn't showing the filenames properly then you would need to copy the 'name' attribute value into 'wsfilename' attribute and then the Attachmetns against a Task would have the correct names.
Tip: Use the Record and Playback option of the workbench to inspect the Document variable and you would see all of the values for a Document variable at desired step in your orchestration.
hope this helps,
cheers,
Parth Pandya
Blog: http://livecyclekarma.wordpress.com

How to get Resource Name in the Repository Service when Publish evt trigger

Hi ,
I have created a repository service in which I have registered the
StatemanagementEvent.PUBLISH
My requirement is I need to know which resource rather resource name triggered this event.
This is the code which
public class ApprovProcs extends AbstractRepositoryService implements IReconfigurable, IResourceEventReceiver
private static final String TYPE = "ApprovProcs";
private Collection repositoryManagers;
public ApprovProcs()
    super();
    // Do not add code here. Add it to startUpImpl() instead
public String getServiceType()
    return ApprovProcs.TYPE;
protected void startUpImpl(Collection repositoryManagers) throws ConfigurationException, StartupException
    // implement this method as follows:
    // - Verify configuration data
    // - Get references to other needed (global) services
    // - Check whether other repository services (this service depends on) are also assigned to the repository managers
    // - Usually the service registers itself for certain events at all repository managers
             this.repositoryManagers = repositoryManagers;
          Iterator it = repositoryManagers.iterator();
          while (it.hasNext())
               try
                    addRepositoryAssignment( (IRepositoryManager) it.next());
               catch (ServiceNotAvailableException e)
                    e.printStackTrace();
protected void shutDownImpl()
     Iterator it = repositoryManagers.iterator();
     while (it.hasNext())
          try
               removeRepositoryAssignment( (IRepositoryManager) it.next());
          catch (WcmException e)
               e.printStackTrace();
protected void addRepositoryAssignment(IRepositoryManager mgr) throws ServiceNotAvailableException
    // Implement this method: Usually the service registers itself for certain events at the repository manager.
     try
          // capture all the respurce which are published
          mgr.getEventBroker().register( this, new StatemanagementEvent( StatemanagementEvent.PUBLISH, null ));
     catch(WcmException e)
protected void removeRepositoryAssignment(IRepositoryManager mgr) throws WcmException
    // Implement this method: Usually the service must unregister itself as an event handler.
     //mgr.getEventBroker().unregister(this, new ResourceEvent(ResourceEvent.CREATE_COLLECTION, null));
     mgr.getEventBroker().unregister( this, new StatemanagementEvent( StatemanagementEvent.PUBLISH, null ));
public void reconfigure(IConfiguration config) throws ConfigurationException
    this.stateHandler.preReconfigure();
    // check the new configuration data
    try {
    catch (ConfigurationException ex) {
      this.stateHandler.postReconfigure(ex);
      throw ex;
    this.config = config;
    this.stateHandler.postReconfigure();
public void received(IEvent event)
     System.err.println( "----rid --42354543--- " );
       IResource rsrPublished = (IResource)event.getParameter();
       if( rsrPublished != null )
          System.err.println( "----rid --42354543--- rsrPublished.getDescription() --- " + rsrPublished.getDescription() );
       else
          System.err.println( "Resource Does not exist -----" ) ;
In the log file I am getting Null Pointer Exception
Can any one please help me in this as where I am going wrong
thanks
pk

Hi Romano & Detlev ,
Thanks for the reply .
This is what I was looking
Detlev:
About the NPE ... in the above code I am not getting that.
Thats my mistake
Earlier I tried with
IResource rsrPublished = (IResource)event.getParameter();
String rid = rsrPublished.getRID().toString();
In the second line of code I was getting the NPE
after that I used to if condition to debug it
Sorry for the confusion...
One more thing
which is the event triggered for approval or how to capture the Approval Event when a content is approved by the Approver
thanks
pk

How to get CLASS name for the generic item?

Hi,
I wrote following method to create a service instance.
public static <IType> IType GetServiceInstance()
       IType type=null;
        try
        InitialContext ic=new InitialContext();
//ERROR:      type=   ic.lookup(IType.class.getName());
        catch(Exception ex)
        //do handle
        return type;
    }please see the //Error: here its giving error, also i m not getting "class" variable in IDE!!!
i want use like this;
IUserService userService=ServiceFactory.GetServiceInstance<IUserService>();so how can i do this?
Edited by: Manikandan.Java on Oct 31, 2007 3:02 AM

I don't know if I understand your question, but you cannot find the class name because it is in run time just an object. You can, however, check if it is an instanceof.
if (genericType instanceof MyType) {
     doMyThing();
}

How to get host name in the workflow?

Hi,
I've a requirement where I need to get CQ Inbox url (http://<hostname>:<port>/inbox) in my custom workflow process. I thought of configuring url to some node and retriving from there.. but It's not the good approach as host name will be different for differnt CQ environments. So what is the best way of getting inbox url?
Env: CQ 5.6
Thanks
Siva

Yep Justin, If the configuration is wrong, any link generated would also be wrong.. I mean, default configuration will be some thing like..
I mean, I can change those configurations as per my instance host name, right?
Example: my instance's host url is: mytest:1501
So I would like to update the same in configurations ..

How to get reference name in the class

i have a doubt in java.
class x
public String toString()
// code here i want
class y
p s v main(.....)
x servlets=new x();
x jsp=new x();
s.o.p(servlets);
s.o.p(jsp);
the result i want is :
hai servlets
hai jsp
what code to be in toString().

You can't get hold of the variable name at runtime. If you want that output, you'll need to create it like this:
x servlets=new x("servlets");so that the x.toString() can know which string to print out.
Message was edited by:
johannef

How to get functionID/Name of the current page

Hi guys,
I have two EBS standard forms "Supplier Entry" and "Supplier View Only" defined as two separate functions in the menu. Depending on which function was launched by the user I have to do some extension.
I found that following code can be used to know whether function is available in the menu or not. But the problem occurs in situation where both functions are available to the user and since the logic fail.
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
I need to know specifically which function was used to launch the form.
On the following post https://forums.oracle.com/message/10468620#10468620 Parag tell something like this
( "IMC_NG_ORG_CONTACTS".equals(pageContext.getParameter("ImcLandingFunction"))
but I don't know what "ImcLandingFunction" equates to in my scenario. I don't see AOL functions passing any parameters to forms.
or is there any other method to know?
Can anyone help?

did you try these ones ? :
pageContext.getFormSubmitName();
pageContext.getFunctionId();

How to get column names for a specific view in the scheme?

how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How can i get my name on the finder bar?

How do i get my name on the top right corner next to the search bar? I have OS X Mountain Lion 10.8.5

System Preferences > Users & Groups
Click the lock to unlock it, if you have to.
Click "Login Options".
Enable " Show fast user switching menu as" and select "Full Name".
Best.

How to get the name of the current tab.

Hi Experts,
I have two tabs in my tab strip and a button common to both the tabs.Can you please let me know how to get the name of the current tab in the event method of the push button.
Thanks in advance.
Regards,
Arun

1.Declare an Action for OnSelect event of Tabstrip. This event is triggered whenever any change in tab occurs.
2. Declare an Import Parameter in this method
   Tab type String.
3. This parameter has value of the selected TAB.
4. You can set this value in some Attribute in Attribute Tab in this event only (OnSelect):
     wd_this->Att = Tab.
Att is the attribute created by you in Attributes Tab of View. ( of type String)
5. Now the selected Tab ID is stored in this Attribute Att.
6. In the Onaction of Button , retrieve the selected tab value from this attribute using :
           Data : lv type string.
            lv = wd_this->Att
Now lv has your selected TAB ID.
I hope it would help you.
Edited by: Saurav Mago on Oct 13, 2009 2:22 PM

How to get the name of the class which is currently in use

Hi all,
I have two classes Mother and Child, and I use this code to print the name of the class in use
DATA m TYPE REF TO zmother.
DATA class_name type string VALUE 'CHILD'.
CREATE OBJECT m TYPE (class_name).
CALL METHOD m->PrintName .
So, what is the source code that I have to put in the PrintName methode?
Thanks.

Ok, but how can I get the name of the object class that calls the methode!
REPORT ztest_method.
*       CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
    METHODS: get_data.
ENDCLASS.                    "c1 DEFINITION
*       CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_data.
****** What is the code to put here to know the name of this Class?*
ENDMETHOD.                    "get_data
ENDCLASS.                    "c1 IMPLEMENTATION
DATA oref TYPE REF TO object.
DATA: method TYPE string.
DATA: cla_name(20).
START-OF-SELECTION.
cla_name = 'C1'.
CREATE OBJECT oref TYPE (cla_name).
BREAK-POINT.
CALL METHOD oref->(method).

How to get the name of the selected building block in a building block content control?

Similar Messages

Maybe you are looking for