How to get the node id of the content shown from campaign

Hi
Can any one please tell how to get the node id of the content shown by the campaign
in jsp
Thanks

One option is to define a custom ad renderer, which is registered with the proper mime-type.
The campaign would run your renderer if the campaign retrieved a node with a binary of the proper registered mime-type.
This allows you to insert yourself into the call chain for the node rendering. You can access the nodeID at that point (and do the typical rendering-- providing a URL for the ShowPropertyServlet)
-Steve

Similar Messages

How to map the node id to the node name in database view just like "V$GES_RESOURCE"

i have a rac with 3 nodes,and the node id is from 1 to 3,i can check it with command olsnodes.
$ olsnodes -p -n -i
tdsdb1 1       tdsdb1-priv     tdsdb1-vip
tdsdb2 2       tdsdb2-priv     tdsdb2-vip
tdsdb3 3       tdsdb3-priv     tdsdb3-vip
and i also can check it in gv$instance
SQL> select inst_id,instance_number,instance_name from gv$instance;
   INST_ID INSTANCE_NUMBER INSTANCE_NAME
         1               1 jftds1
         3               3 jftds3
         2               2 jftds2
but when i select the master node of some resource ,it shows some value of node id =0
SQL> select resource_name,master_node from v$ges_resource;
RESOURCE_NAME                  MASTER_NODE
[0xdcc9fa12][0x246658a5],[QQ]            2
[0x932][0x70c230e],[IV]                  0
[0xd9fb][0x13181703],[IV]               0
[0xddae][0x0],[TM]                       0
[0xb970fb05][0x729b596a],[LB]            2
[0xb580][0x70c2e1c],[IV]                 0
[0x31ad56fb][0x7e4c3daa],[QQ]            2
[0x3][0x797609],[HW]                     0
[0x2bf04627][0xf28b1575],[QI]            0
[0x19c89f33][0xd06ef447],[QQ]            0
[0x529ae82][0x86e25d46],[QQ]             0
it seems that the master node id is from 0 to 2
i want to get the node name from the node id from   v$ges_resource,so i check the table cluster_nodes ,cluster_instances,but there are nothing.
SQL> select * from CLUSTER_NODES;
no rows selected
SQL> select * from CLUSTER_INSTANCES ;
no rows selected
how can i get the node name from the node id in the tables just like " v$ges_resource"? thank you .

my cluster ware version is 10.2.0.5
database version is 10.2.0.5
and the source of rac is all online
$ crsctl query crs activeversion
CRS active version on the cluster is [10.2.0.5.0]
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE    10.2.0.5.0      Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Productio
NLSRTL Version 10.2.0.5.0 - Production
$ crs_stat -t
Name           Type           Target    State     Host
ora.jftds.db   application    ONLINE    ONLINE    tdsdb2
ora....tds1.cs application    ONLINE    ONLINE    tdsdb1
ora....s1.inst application    ONLINE    ONLINE    tdsdb1
ora....ds1.srv application    ONLINE    ONLINE    tdsdb1
ora....tds2.cs application    ONLINE    ONLINE    tdsdb2
ora....s2.inst application    ONLINE    ONLINE    tdsdb2
ora....ds2.srv application    ONLINE    ONLINE    tdsdb1
ora....tds3.cs application    ONLINE    ONLINE    tdsdb3
ora....s3.inst application    ONLINE    ONLINE    tdsdb3
ora....ds3.srv application    ONLINE    ONLINE    tdsdb3
ora....SM1.asm application    ONLINE    ONLINE    tdsdb1
ora....B1.lsnr application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.gsd application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.ons application    ONLINE    ONLINE    tdsdb1
ora.tdsdb1.vip application    ONLINE    ONLINE    tdsdb1
ora....SM2.asm application    ONLINE    ONLINE    tdsdb2
ora....B2.lsnr application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.gsd application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.ons application    ONLINE    ONLINE    tdsdb2
ora.tdsdb2.vip application    ONLINE    ONLINE    tdsdb2
ora....SM3.asm application    ONLINE    ONLINE    tdsdb3
ora....B3.lsnr application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.gsd application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.ons application    ONLINE    ONLINE    tdsdb3
ora.tdsdb3.vip application    ONLINE    ONLINE    tdsdb3

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
Kind Regards

iTunes 11
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction BP?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How to get values/data stored in the database into a list-item.

how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
     rg_name varchar2(40) := 'emp_rec';
     status number;
     groupid recordgroup;
     it_id item;
begin
     it_id := Find_Item('empno');
     groupid := create_group_from_query(rg_name, 'select empno from emp');
     status := populate_group(groupid);
     populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?

for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query.

I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please

You can't.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

How to get a check box on the selection screen

Hi all
can any body tell me how to get a check box on the selection screen

parameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS ...... AS CHECKBOX ......
Parameter is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.

Every time I try to download the new version of Adobe Flash Player it saves as a .txt file and I do not know how to get it to save in the correct format.

Every time I try to download the new version of Adobe Flash Player it saves as a .txt file and I do not know how to get it to save in the correct format.

Please post in the Adobe Flash Player forum.

How to get a scroll bar to the applications popup by default?

How to get a scroll bar to the applications popup by default when clicked the applications folder from the dock? If I have so many applications that they do not fit in the default area, I have to find out myselft that I have to scroll the content before the scroll bar appears. This leads to "where is my missing applications questions" by the novice users with Mountain Lion.

System Preferences > General > Show scroll bars.
Click the button by the side of "Always".
Best.

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan

How to get a minus sign with the cost field in ALV.

Hi ,
How to get a minus sign with the cost field in ALV.
The Ouput will be displayed like Rs -1500 instead of 1500-
I can't use concatenate also as i may have to use the sum functionality of ALV .
Cheers
Sunny

Hi sunny,
1. The OTHER FIELD
has to be character field of say length 15.
2. Write the original numeric value to
this character field (in a loop)
3. But simply writing won't help.
4. use this kind of logic.
5.
REPORT abc.
DATA : m TYPE i.
DATA : chr(15) TYPE c.
m = -100.
WRITE m TO chr.
IF m < 0.
SHIFT chr RIGHT BY 1 PLACES.
CONDENSE chr.
CONCATENATE '-' chr INTO chr.
ENDIF.
WRITE chr.
regards,
amit m.

How to get the node id of the content shown from campaign

Similar Messages

Maybe you are looking for