How to get the official blackberry maps

Hey guys i was deleting some apps from blackberry bold 9650 and i deleted blackberry maps by misstake is there any way to get back if you do know how to get back pls send a link replys thank you.

Hi reynardo
Try this link to download BlackBerry maps : BlackBerry Maps.
God luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

How to get the filename in mapping when using sender File adapter?

hi Experts,
   I have scenario where XI reads the input file using Sender file adapter.
   The file name is configured in the communication channel.
   In my message mapping it is possible to read this file name?
Thanks
gopal

Hi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha

How to get the java code of the message mapping

how to get the java code of the message mapping,
I mean to ask how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi Satya,
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

How to get the list of installed maps in OviMaps 3...

Is it possible somehow to get the list of maps which are downloaded and installed to OviMaps 3.03? Map loader seems not to help

Use nokia ovi suites. This has the new map loader inside it. Once you run it, attach your phone, click on map, and it should show you a least of countries that has maps you can download for.

How to get the values from profileFormHandler

Hi,
here i have problem with how to get the values after setting the values to that , how i have to call repository, what repository i've to call?

When you are setting values, check the repository(getRepository()) from which mutable repository item is created. Go to that class .properties file and check the repository mapping.
-karthik

How to get the list of materials from Sap r/3

Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khanna

Hi Khanna,
 1. Should we create DT MT MI and all (OR) not
 Yes U need to create for HTTP site...for RFC U need to import..
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
 You create your own structres for Request and respoce.. and Map it with RFC..
3.Or the second thing is how to get the list of materials start with some alphabate.
 I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar.

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

How to get the current tree element (node/childnode/childnode/...) ?

Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
Ramó

Hi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
      IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
      /* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
      treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to get the filename from J2SE File adapter

In our project scenario , we are using J2EE and J2SE engine both .J2EE for mapping and J2SE for Deliveying the message .
In one senario, routing will be based on the filename .
J2SE Sender File adapter --- XI Adapter --- XI pipe line
So the File reaching to XI pipelane via J2SE File adapter--> XI adapter.
When we are using the dynamic configurator in the XI to get the filename
we are not able to get the file name becasue it is coming to XI via
XI adapter.
How to get the filename ????Hope I am clear about the problem.

hi,
try this
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//obtengo la Key del FileName
DynamicConfigurationKey keyF = DynamicConfigurationKey.getName();
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
/people/mohammed.zabiulla/blog/2008/03/26/have-you-ever-tried-to-determine-mail-cc-dynamically
Hope it helps
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Apr 11, 2008 9:31 AM

How to get the room id & user id in our component

Hi Experts,
Collaboration -> Rooms -> Room Directory
It will show the available rooms
Select restricted room tab in that.
That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the Request Membership option. Then it will send the mail to the owner of the room.
In that UI commend they mapped with the roomid and userid.
I need to know how to get the room id & user id in our component.
How to get the Room Id dynamically?
Can anybody help me for this?
Helpful answers will appreciate.
Thanks and Regards,
Kathiresan R

Hi Kathiresan,
you can get the Room ID and the User ID over the API.
Getting User ID within WebDynpro application:
IUser user = WDClientUser.getCurrentUser().getSAPUser();
String logonId = user.getUniqueId();
Getting User ID within custom Portal Component:
IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
IUser user = request.getUser();
String logonId = user.getUniqueId();
Getting Room Id of a user who belongs to this room:
IUser user = request.getUser();
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
String roomId = "";
for (int i=0; i<myRooms.length; i++) {
IRoom room = myRooms;
if (room.getName.equals('nameOfRoomToFind')) {
roomId = room.getId();
Greets
Denis

How to get the serial Numbers issued for an STO

Hi,
I created my own STO and mapped a serialised material for the same using transaction. I increased the stock by issuing serial numbers. The /SYCLO/MM_DOPURCHASEORDER_GET BAPI returns the PO header, item and longtext details. I want the serial numbers which are issued to the STO and the list of serial numbers for which the receipts has been done.
I want to know how to get the serial numbers which are issued to the STO throught the standard function module. I want only the issued serial numbers not the one for which the receipts has been done.
I tried using the standard BAPI, "BAPI_PO_GETDETAIL1" to get the serial number collection. But the FM is not returning the issued serial number as well as the list of serial numbers for which the receipts has been done. It is returning only the PO history in which the list of document number are present.
Thanks in Advance,
Mohan.

Hi,
Using the transaction "MB1C" and movement type "561", I filled the required details such as Material Number, Quantity, Storage Location and Batch. After filling all these details, when I press enter, it will ask for me to enter the serial numbers equal to the quantity specified. I entered the serial numbers by selecting the available serial numbers for that particular material by pressing F4 help.
Please let me know if you need any more inputs in this regards.
Thanks,
Mohan.

How to get the obiee dashboard secuirity in adf to assign the roles in adf for users

how to get the obiee dashboard secuirity in adf to assign the roles in adf for users

thanks Benjamin...
my present requirement is pull Role to Dashboard mapping from OBIEE Catalog
in my project we are going to restrict the users and assigning the roles from adf.
Pls Help me..

How to get the new dependency SCA's related to 7.4 version with out upgrading NWDI server

Hi
We are in process of upgrading the custom webdynpro and portal components to SAP Portal 7.4.
I saw in some discussions that, we don't need to upgrade NWDI , we need to install new JDK version(1.6) to map that jdk to the new track for migrating the custom component to new track.
But i have questions related to NWDI track dependency files.
When i create new track to support 7.4 components need to be available in the respective track.
we have central SLD and we create all the product and custom software components in that SLD(7.01) itself , To create the custom software component in SLD , i add required dependency files. once the software component is ready, when i create the track in nwdi system i will be able to fetch the custom software component in nwdi system by click on cms update.
But now i need following new new dependency software component versions in SLD related to 7.4 for creating new software component to those dependency's to support the new track in NWDI.
EP_BUILDT
SAP-JEE
SAP_BUILDT
SAP_JTECHS
But my SLD server version is : 7.01 version.
so do i need to upgrade the SLD server to 7.4 get the latest dependent SCA's or just need import new SLD content in SLD server to add new custom software component to create?
kindly advice how to get the new software components in SLD without upgrading the NWDI & SLD system to 7.4
Thanks

Jun,
Thanks for the reply.
But i am not able to find the following two SCA's related to 7.4 version. I am able to find the rest of the SCA's. I able to see only 7.02 version related to following dependency files.
SAP-JEE
SAP_JTECHS
SAP-EU (CA EU) ( having only 7.01, 7.02, 7.10, 7.11 and 7.20) related to Guided procedures.
Did they changed any naming conventions related to these software components? if so what are new software compnents names to use
Please clarify.
Thanks
Vijay

How to get the ESS & MSS users in ECC 6.0 into portal

Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
Daya

Hi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal

How to get the official blackberry maps

Similar Messages

Maybe you are looking for