How to get the page numbers in the PrintAdvance Data grid without using Vbox/Vgroup header or footer

hi
I want to print the page numbers for the data in Advance Data grid, For printing I am using print advance data grid , but unable to print the page numbers with that.
actually i tried with Vbox/Vgroup, but when tha data is more because of this it is strucking, and more over imageRenderer in the PrintAdvancedataGrid not printing.
can any one help in this regard?

Image Caches hold images you've already loaded so the next time you request them, they can be made available without network latency.  This assume for your DG, that all images you need to print have been loaded by, for example, whatever DG the user was looking at before hitting Print.  This is easy when there are only a few icons used to show status, but won't work if each row has a different image unless you've somehow loaded up all of those images beforehand.
Spark BitmapImage has an Image cache, but some third party ones are discussed here:
http://thanksmister.com/2009/01/18/superimage-redux/
-Alex

Similar Messages

  • How to get the page numbers of a word/mpp/execl doc using Java?

    Hi,
    I meet a problem in Java programming. I want to get the page numbers of a Word/MPP/EXECL/PDF document. For exmaple, if a PDF docment have 10 pages, I need get the 10 . How to get it using Java?
    Please advise me as soon as possible if you have any good suggestions! Thanks!
    Yin

    There are several good tools that allow you to access COM objects from Java. Here are two of the better ones:
    Bridge2Java
    http://www.alphaworks.ibm.com/tech/bridge2java
    J-Integra
    http://www.linar.com/
    Both of these tools will allow you to access MS Office products (including Word and Excel) via COM interfaces.

  • How do i start page numbering in the middle of a document in pages

    I need to begin page numbering after the initial pages in my thesis. I can get the page numbers to not appear for the first few pages but when it does begin (say page 4), it counts the previous pages.
    I there a way I can get pages (5.2) to count from page 4 onwards?
    So that page 4 will read "page 1", page 5 read "page 2" etc.....
    Thanks

    Have you divided the document by Inserting Section Breaks?
    Have you unchecked Continue from previous section in Section under Document?
    Peter

  • Getting chapter numbers to show up in the TOC with the page numbers...

    First, thank you all very much for posting replies.  This forum is wonderful.
    I have a doc that needs to have the chapter numbers show up with the page numbers in the TOC.
    I insert the <$chapnum> and <$currentpagenum> in the footer, and I get 1-1 to show up.
    To include the 1-1 in the TOC, do I have to edit the Reference Page, or is there another way.
    Thank you SO much for your help!!!!!!!!!!!!!

    Thank you VERY much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Got it to work.  However, my TOC will not update with the new building blocks.
    Have played and played with it.  Any suggestions?
    Thank you!!!!!!!!!!!!!!!!

  • How to print the page numbers

    hai everybody,
    If you dont mine will you give any suggestions to me. I am using BI publisher reports. I want to be print the page numbers in the body level not in the header/footers level.
    Than'Q' & Regards,
    Chinni...
    Edited by: user11813026 on Aug 21, 2009 5:37 AM

    Without seeing your xml and template , its very difficult for us to assume where you are doing wrong.
    Invoice Page break

  • Page Numbering for the Clueless N00b -- FrameMaker 7

    Hey gang,
    I've got a fairly simple FrameMaker 7 document (one file, 94 pages) that requires page numbers to follow the Chapter No. - Page No. format (e.g., 3-2).    Two issues occur: 1) the chapter number stays at 1, and 2) the page number increments by one when I need it to restart after every new chapter.
    My paragraph tags are like this:
    ChapterTitle
    Heading1
    Heading2, etc.
    I think I've identified a disconnect: the heading numbering is as follows (thanks to Deborah Snavely for explaining the matrix approach):
    <n+>< =0>< =0>< =0>< =0>< >< >\t
         where n+ is the heading number, followed by four subheadings.  The last two bracket sets are for figures and tables, respectively.  I set the page numbering in the master pages as follows: <$chapnum>-<$curpagenum>.  Chapter/paragraph numbering works as advertised, as do figure and table numbers.  How do I change the page number variables to match the chapter number and restart the page numbering?
    Regards,
    -terry-

    You need to set the appropriate numbering behaviours in the book file for each of the chapter files.
    Highlight a file in the book file.
    Right-click to get the context menu.
    Select Numbering...
    Set the Chapter and Page numbering tabs to behave as required.

  • Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

    PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

    Hi stephaniec0103,
    Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
    Have you tried repairing Acrobat from the Help menu?
    Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
    You may download a 30-day free trial version of Acrobat from the below mentioned link:
    Download Adobe Acrobat free trial | Acrobat XI Professional
    Let me know how it goes.
    Regards,
    Anubha

  • Get report page numbers

    I am generating a test data record in Word with generating report toolkit. On every page I put in a footer text to the left with the date and time.
    (in Labview with "set report footer text").
    I also put in the Word template for the report, page numbers on the bottom RH side. When I run my vi I get the the footer text on the LH side,
    but I loose the page numbers on the RH side. How do I solve this ?

    Hi BartvStC,
    i´m not sure what i should see in your vi, it don´t show what you make.
    Attached you will find the vi with which i made it, the template doc and the result doc.
    Mike
    Attachments:
    Unbenannt21.PNG ‏9 KB
    Unbenannt1.PNG ‏10 KB
    Unbenannt11.PNG ‏6 KB

  • Can not get correct page numbering for sections

    I have created a RTF template for a report that is Burst by USERID and then on the template I have the DeptID as the section for the report. When I run the report I get page numbering by DeptID - so if 1 department has 2 pages I see page 1 of 2, 2 of 2, then the page numbering starts over for the next department. I actually want the report to show a total number of pages for the entire report in the header. Any ideas on how I can accomplish this? Thanks!

    Vetri changed the template to have the body start prior to rows that I wanted repeated on all pages and then copied the repeated rows on the second page. This allowed for my page break between departments to happen and the page numbering in the heading also included the total number of pages not the total pages for each department.

  • How do I put page numbers in TOC to left of sections?

    This is how the actual Pages manual does its toc, yet within the manual, the page numbers always appear to the right of the text.  I thought this format might solve another toc layout problem I have.  I'm cleaning up a book of poems written by a friend.  Every poem has a number (and is on a new page) but only a few of the poems have a title.  This means that if I tab between number and title, where this exists, the entry goes off the line, see number X  (not my choice to use Roman numerals!):
    So, I thought if the page numbers were to the left, I could format the style so where there was a title (like Au suivant) this could be properly aligned.

    fruhulda was amazingly helpful, worked beyond the call of duty on my document, and provided me with the essential idea , that I needed two styles for the poem heading line, one when there was just a number and the other when there was a number and title.
    I still wouldnt mind knowing for the future how one can put the page numbers to the left in the TOC.
    And for the record, dont do what I have just done: workin Pages (as I dont have word), and then export and send to the friend using Word.  I have discovered the hard way that my Page styles did not export to Word!

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • How do I get my HP Photosmart 7960 to print the page numbers on a multi-page project?

    How do I get my HP Photosmart 7960 to print the page numbers when printing a multi-page project?

    Hi,
    This has most likely nothing to do with the printer but with the program you are using to print. For example Word has a setting for this, so let me know which program and I might be able to check for you.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • The page numbers on my e-mail are missing, how do I get them back?

    The page numbers are missing on my e-mail page and I have looked into help and cannot find the answer. I use to have 25 messages per page and now it is continuous and very annoying.

    Hi yraceburu1909,
    From your description, I understand that your webmail provider used to display 25 emails per page, but now it is showing all the emails in a continuous form, where you can scroll down the page.
    It appears that your webmail provider is Yahoo!, is this correct?
    Yahoo! recently redesigned their webmail, and it is the only version available to users, so there is not much that can be done. Please understand that this is not a browser related issue, so Firefox is not at fault.
    Please see [http://news.softpedia.com/news/The-New-Yahoo-Mail-Gets-Infinite-Scrolling-Preview-Pane-to-the-Right-358793.shtml this link] for more information about the Yahoo! Mail redesign.
    I hope that this information is useful. Please let us know if you have any other questions.
    Thanks!!
    - Ralph

  • In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

  • How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page

    How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestions?

    When you signed to be able to post in the forums, you were urged to read and accept the Terms of Use ruling these forums.
    They claim :
    The contents of the "More Like This" box prove that applying the rules you would have get the wanted explanations without creating this new thread.
    Yvan KOENIG (VALLAURIS, France) mardi 26 avril 2011 10:04:03

Maybe you are looking for

  • Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

    Dear Experts, I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA. In BI Dev, I use the option Necessary Object. While importing request into BI QA, it fails with a return code 12. Some of the errors are: Start of the after-imp

  • IPod nano: first impressions after 2 days of use

    I recently got an iPod nano, 1GB, black. Just thought I'd post my experience with it so far: unbelievably small... aside from pictures on the internet I never saw a life-sized one. Nearly fits in the palm of my hand (but I've got big hands). Design:

  • Having Major issues trying to burn DVD's.

    I did not have any issues this past week burning DVD's for family members. I decided to put it on hold for a few more days to make our holiday travel trip to DE. I arrived, opened the program, began the burning process (which by the way took close to

  • Forwarding work item

    Hi Forum, When we forward a workitem from Inbox of an approver.. 1)Which BADI is trigered? I tried puting a break point in workflow BADI but it is not trigered when i pushed the Send button. 2)Are any mails trigered? Regards, Anubhav

  • Getting a WIERD error when i start my ATG application.

    Hi All, Below is the stack trace - 16:02:03,753 INFO [STDOUT]       16:02:03,753 INFO [STDOUT] Timetaken for prodSkuLookUpInvall : 0 16:02:13,550 INFO [STDOUT] /atg/dynamo/servlet/dafpipeline/DynamoHandler 16:02:13,550 INFO [STDOUT]       16:02:13,55