How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.
Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa
Similar Messages
-
How to get the return values from a web page
Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AMHi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri -
How to get the current week from sysdate?
Hi sir,
i want to know how to get the current week from sysdate?
thanksHi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios -
How to get the selection parameters from logical database into one of the t
Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
BasuHi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter -
How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way
Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul -
How to get the Database type from weblogic Db connection
I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out. -
How to get the XML messages from JMS Queue in BPM
I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan -
How to access the abap program from MS Excel?
Hi ,
How to access the abap program from MS Excel or MS access ?
The abap program "z..." has the below input and output attributes
Input : Date,Index and file name with location (.htm or .xls)
Output : htm or xls file downloaded at the above location.
Please help me here.Do we haev to use BAPI and RFC?If yes,please tell me how to use them
Regards
DineshMaybe this could help you up -;)
[Simple SE38 Emulator using Microsoft Excel|Simple SE38 Emulator using Microsoft Excel]
Greetings,
Blag. -
How to find the print program for a sap script
Hey Experts,
How to find the print program for a sap script (espicially when it is a custom script(Z*))?
Thanks a ton,Thanx Vijay,
Actually when I searched for the program in both the tables it didnt show up ther.
But when I did check in the texts of script, I found it.
Good job.
Thanks all.
Vijay, a small doubt.
But why didn't it show up in those 2 tables when all the print programs for standard scripts show up usually?
thnx once again.
Message was edited by: dev a -
Change the print program from the Transaction F150
Hi all.
Does somebody can help how to change the print program in the transaction F150?.
I have copied the F150_dunn_01 (form) and the SAPLF150 (printprogram)
This transaction calls the form F150_dunn_01 I want to know how to assign to this transaction my print program ZSAPLF150
Thanks and regards.Hi Srinivas Adavi.
Ok, I have taken this path...
IMG-->Financial Accounting
-->Accounts Receivable and Accounts Payable
-->Business Transactions
-->Dunning
-->Printout
In this, appears:
Define Dunning Forms (with SAPScript)
Define Dunning Forms (with SAP Smart Forms)
Assign Dunning Forms
Define Sender Details for Dunning Forms
Develop Enhancements for the Dunning Print Program
Attached Payment Media
-->And So On.
What are then next steps to make the configutation; sorry I'm newbe jeje -
How to get the query values from the url in a servlet and pass them to jsp
ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A¶m2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanksok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
% -
How to get the selected values from the shuttle
Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanksyou can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil -
How to get the selected values from a selectmanylistbox?
Hi ADF Experts,
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb2"
value="#{viewScope.TestBean.lovValue}"
autoSubmit="true" valuePassThru="true">
<f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
actionListener="#{viewScope.TestBean.getSelectedValues}"
partialSubmit="true"/>
private List<String> lovValue;
private List<SelectItem> actualList;
//getters and setters
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for (String selectedItem : lovValue) {
System.out.println("Selected item: " +selectedItem.); // this is giving 1 and 3 like this. how to get the checked values as I'm getting only the indexes. In this scenario I am populating the list programmatically.Just I wanted to know how can we get the selected values(not indexes). Please suggest.
Thanks-
AbhijitHi Timo,
As I am sharing the page fragment and the Java class. So its my usecase I have mentioned below
I am sharing the jsff page fragment and java class. So that it wud be of help to others.
jsff page fragment
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">
<af:panelGroupLayout id="pgl1">
<af:commandButton text="Search" id="cb1"
actionListener="#{viewScope.TestBean.searchSupplier}"/>
</af:panelGroupLayout>
<af:popup id="p1" binding="#{viewScope.TestBean.searchSupplierPopup}">
<af:dialog id="d2"
type="none">
<af:table value="#{bindings.Contacts.collectionModel}" var="row"
rows="#{bindings.Contacts.rangeSize}"
emptyText="#{bindings.Contacts.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.Contacts.rangeSize}"
rowBandingInterval="0"
binding="#{viewScope.TestBean.tsupportIssues}"
filterModel="#{bindings.ContactsQuery.queryDescriptor}"
queryListener="#{bindings.ContactsQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectionListener="#{bindings.Contacts.collectionModel.makeCurrent}"
rowSelection="multiple" id="t1">
<af:column sortProperty="name" filterable="true" sortable="true"
headerText="#{bindings.Contacts.hints.name.label}" id="c2">
<af:outputText value="#{row.name}" id="ot1"/>
</af:column>
<af:column sortProperty="email" filterable="true" sortable="true"
headerText="#{bindings.Contacts.hints.email.label}"
id="c1">
<af:outputText value="#{row.email}" id="ot2"/>
</af:column>
</af:table>
<af:commandButton text="OK" id="cb5" partialSubmit="true" actionListener="#{viewScope.TestBean.testMethod}"/>
<af:commandButton text="Cancel" id="cb6"
actionListener="#{viewScope.TestBean.cancelPopupSearch}"/>
</af:dialog>
</af:popup>
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb5"
value="#{viewScope.TestBean.lovValue}"
autoSubmit="true" valuePassThru="true"
binding="#{viewScope.TestBean.prp1}">
<f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
actionListener="#{viewScope.TestBean.getSelectedValues}"
partialSubmit="true"/>
<af:commandButton text="remove selected" id="cb4"
partialSubmit="true" actionListener="#{viewScope.TestBean.removeSelectedValues}"/>
</jsp:root>
TestBean.java
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
public TestBean() {
super();
public void setTsupportIssues(RichTable tsupportIssues) {
this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
// Add event code here...
// For learning purposes - show Select Many Button clicked
System.out.println("Select Many Button has been Clicked");
// // RowKeySet Object can hold the selected rows from a user as follows
RowKeySet rksSelectedRows = this.getTsupportIssues().getSelectedRowKeys();
// Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
Iterator itrSelectedRows = rksSelectedRows.iterator();
// Get the data control that is bound to the table - e.g.
// OpenSupportItemsIterator
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("findAllContactsIterator");
// Information from binding that is specific to the rows
RowSetIterator rsiSelectedRows = dcIteratorBindings.getRowSetIterator();
// Loop through selected rows
int i=1;
while (itrSelectedRows.hasNext()) {
// Get key for selected row
Key key = (Key)((List)itrSelectedRows.next()).get(0);
// Use the key to get the data from the above binding that is related to the row
Row myRow = rsiSelectedRows.getRow(key);
// Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
System.out.println(myRow.getAttribute("name"));
valuesChoosed.add(myRow.getAttribute("name"));
// actualList = new ArrayList<SelectItem>();
// String j = Integer.toString(i);
// actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
// i++;
searchSupplierPopup.hide();
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
return lovValue;
public void setActualList(List<SelectItem> actualList) {
this.actualList = actualList;
public List<SelectItem> getActualList() {
actualList = new ArrayList<SelectItem>();
if(valuesChoosed.size()!=0){
for(int i=0;i<valuesChoosed.size();i++){
actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
else{
actualList.add(new SelectItem("1","Select One"));
return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
return prp1;
public void setValuesChoosed(List valuesChoosed) {
this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<valuesChoosed.size();i++){
System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
// Add event code here...
public void setSelectedItems(UISelectItems selectedItems) {
this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
return selectedItems;
public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
this.searchSupplierPopup = searchSupplierPopup;
public RichPopup getSearchSupplierPopup() {
return searchSupplierPopup;
public void cancelPopupSearch(ActionEvent actionEvent) {
// Add event code here...
searchSupplierPopup.hide();
public void searchSupplier(ActionEvent actionEvent) {
// Add event code here...
RichPopup.PopupHints hints = new RichPopup.PopupHints();
searchSupplierPopup.show(hints);
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
public TestBean() {
super();
public void setTsupportIssues(RichTable tsupportIssues) {
this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
// Add event code here...
// For learning purposes - show Select Many Button clicked
System.out.println("Select Many Button has been Clicked");
// // RowKeySet Object can hold the selected rows from a user as follows
RowKeySet rksSelectedRows = this.getTsupportIssues().getSelectedRowKeys();
// Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
Iterator itrSelectedRows = rksSelectedRows.iterator();
// Get the data control that is bound to the table - e.g.
// OpenSupportItemsIterator
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("findAllContactsIterator");
// Information from binding that is specific to the rows
RowSetIterator rsiSelectedRows = dcIteratorBindings.getRowSetIterator();
// Loop through selected rows
int i=1;
while (itrSelectedRows.hasNext()) {
// Get key for selected row
Key key = (Key)((List)itrSelectedRows.next()).get(0);
// Use the key to get the data from the above binding that is related to the row
Row myRow = rsiSelectedRows.getRow(key);
// Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
System.out.println(myRow.getAttribute("name"));
valuesChoosed.add(myRow.getAttribute("name"));
// actualList = new ArrayList<SelectItem>();
// String j = Integer.toString(i);
// actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
// i++;
searchSupplierPopup.hide();
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
return lovValue;
public void setActualList(List<SelectItem> actualList) {
this.actualList = actualList;
public List<SelectItem> getActualList() {
actualList = new ArrayList<SelectItem>();
if(valuesChoosed.size()!=0){
for(int i=0;i<valuesChoosed.size();i++){
actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
else{
actualList.add(new SelectItem("1","Select One"));
return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
return prp1;
public void setValuesChoosed(List valuesChoosed) {
this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<valuesChoosed.size();i++){
System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
System.out.println(this.getLovValue().remove(i));
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setSelectedItems(UISelectItems selectedItems) {
this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
return selectedItems;
public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
this.searchSupplierPopup = searchSupplierPopup;
public RichPopup getSearchSupplierPopup() {
return searchSupplierPopup;
public void cancelPopupSearch(ActionEvent actionEvent) {
// Add event code here...
searchSupplierPopup.hide();
public void searchSupplier(ActionEvent actionEvent) {
// Add event code here...
RichPopup.PopupHints hints = new RichPopup.PopupHints();
searchSupplierPopup.show(hints);
Thanks,
A. Abhijit -
File Adapter - how to get the file count from a folder
Hi All,
I have a requirement that have to poll a directory when the file count is reached to number N (ex:number of files avilable in folder is 5) otherwise it should wait and not pick any of the files. Is it possible to get the file count from a folder using file adapter ?? otherwise please suggest me an approach to achieve this requirement.
Thanks,
JJHi Sarath,
Thank you for your reply.
Go with the list files operation of file adapter it will gives you the number of files in the specified folder as you given. . - this step is already done.
When the number of files reaches your count startup your webservice that which can polls the files. . . - how can i acheive this?? Have to poll the directory and process the number files - please let me know, what could be added to the webservice which is being invoked after cheking file count from parent process.
The reason for the above question is - we cannot use ReadFile operation in second webservice because it will be automatically triggered when the file is avilable. Also SyncRead operation supports reading one file in b/w bpel process. Kindly explain me the implementation steps.
Thanks,
JJ
Maybe you are looking for
-
I recently purchased an app. from iTunes that was on a monthly direct debit subscription. Despite trying to following directions from iTunes to cancel it - I am getting no where. Seem to be going around in circles. Can any one help with some strai
-
Problem converting to INT from an XML file
Hi folks, I hope you can help with this one, as it's been driving me nuts... Basically (and I'll try to keep this brief!) my project takes in an extremely basic XML file. I've never really done this before, but I seem to have got most of it working a
-
LIST LDB'S CONCERNED TO THE DIFFERNENT PARTS OF HR MODULE LIKE PP,PA,OM ,PLEASE
-
Ive been trying to download the latest version of itunes onto my laptop but when i try to install it, it tells me that the feature i am trying to use is on a network resource that is unavailable. I tried updating my windows, i cleared all itunes setu
-
End User Guide and Clone issues
Hi, I am a newbie apps dba and would like to which docs/books to refer to know how the end user's work in EBS like how they place an order,etc. And also, I have done my clone a day back but the user's complain it is slow. I submitted a CP, it was com