How to get the position category field from PO13?

Hi all,
Anyone knows the logic of retrieving the Position Category Field? I am given the Person's position p0001-PLANS
Goto Tcode Po13.
Enter plan version: 1
Position: pernr (70000002)
Click on general attribute maint. infotype
I need the value displayed. It is from structure PT1222-low
May I know from where structure PT1222 takes values from?
I have checked the table HRP1222. Somehow there is no field to indicate the position category.
The structure for the general attribute maintenance
Edited by: Siong Chao on Jan 9, 2012 10:37 AM

Hi,
You can get the data from the tables HRP1222 and HRT1222. Read the TABNR value from HRP1222 and use the TABNR to get further data from the table HRT1222.
~~~Ganesh Kumar K.

Similar Messages

How to get the backup of photos from i cloud id ?

plz provide me the answers as soon as possible.

BALAJI_PRASANNA wrote:
Hello,
I am very new to Labview. Í have an image of an LED and wanted to find the luminance value. I got the luminance image from the IMAQ ExtractSingleColorPlane but the value is not displaying. I just wanted to know how to get the value of luminance from the IMAQ ExtractSingleColorPlane. I have attached what i have done below.
Thanks in advance.
Before learning about LabVIEW, learn about images. An Image (in LabVIEW) is a "representation of an image", that is, the wire itself doesn't really have a "value", but "points to" a collection of data that can be "imaged" (i.e. looked at as through it were a picture), "manipulated" (for example, extracting a color plane, basically getting the "red channel", an image looking as through it were viewed through a red filter), and possibly returning arrays of numbers representing the intensity of the light at a certain position in the picture.
BS

How to get the object class field value in CDHDR table for vendor

hi
how to get the object class field value in CDHDR table for vendor

Try KRED/KRED_N as object class in CDHDR for Vendor.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to get the default selection color from JTable

Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-Jenny

The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );

Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

How to Get the excel sheet formula from the server side into the j2me app?

How to Get the excel sheet formula from the server side into the j2me application?
Here the excel sheet is in server side.i want to do get the excel sheet values (only some part of the excel sheet based on some conditions) from server side into j2me.In j2me I want to done some client side validation based on the formula of excel sheet.Then i resend the new updated data to the server.
But here deosn't know any mehtod to get the excel sheet formula from server side.So kindly help me to get the excel sheet formula from the server.
So how to get the excel sheet formula frome the server side into j2me Application...
Plz guide me to solve this issue...
thanks & regards, Sivakumar.J

You should not post a thread more than once. You've crossposted this question to another forum. I have deleted that one.

How to get the failover partner name from C++ client

Hi All,
I have configured the mirroring session for my application.
I want to modify the connection string with failover partner name.
Could any one please let me to know how to get the failover partner instance from C++ client dynamically.
Thanks,
Prasad.

Are you looking for this?
http://www.connectionstrings.com/sql-server-2012/
http://stackoverflow.com/questions/25534972/auto-failover-multiple-connections-to-mirror-database-when-principal-goes-down

How to get the Portal Page name from PLSQL?

Can anyone tell me how to get the portal page name from my dynamic page using plsql?
Apparently you can get the page id and work it out from there, but my calls to get the page id are not returning any values anyway.
My code for attempting to get the page id is below.
<oracle>
declare
v_pageid varchar2(30);
begin
v_pageid := wwpro_api_parameters.get_value('_pageid', '/pls/portal30');
htp.print('Page is '|| v_pageid);
end;
</oracle>
Ideally I'd actually just like to get the page name. Is there a straightforward way to do this?
Thanks in advance!
Sarah

Few clarifications -
1. wwpro_api_parameters cannot be used to get default portal
page parameters such as '_pageid', '_dad', '_schema' etc.,
2. Page information can be obtained through any components which
are available in that particular page. For example, in case of
dynamic page, we need to publish it as a portlet and add it to the
page. This process creates necessary packages in the DB, but we
will not have access to the portlet methods.
So, I would prefer creating a simple DB provider & portlet and access
page title from its show method as follows -
//Declare local variable l_page_id, l_page_title as varchar2
select page_id into l_page_id from wwpob_portlet_instance$ where
portlet_id = p_portlet_record.portlet_id and
provider_id = p_portlet_record.provider_id;
select name into l_page_title from wwpob_page$ where id=l_page_id;
More information on DB provider can be found at
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/articles/understanding.database.providers.html
Secondly, usage of wwpro_api_parameters.get_value method is
incorrect. This method expects two arguments -
<ul>
<li><b>p_name : </b> The name of the parameter to be returned.</li>
<li><b>p_reference_path : </b> An unique identifier for a portlet instance on the current page.</li>
</ul>
p_reference_path would be something like 99_SNOOP_PORTLET_76535103 and not some type of path as its name suggests.
The following code fragment fetches all parameters available
for a portlet.
Note : Copy this code into 'show' method of your portlet.
//Declare l_names, l_values as owa.vc_arr
* Retreive all of the names of parameters for this portlet
l_names := wwpro_api_parameters.get_names(
p_reference_path=>p_portlet_record.reference_path);
* Retreive all of the values of parameters for this portlet
l_values := wwpro_api_parameters.get_values(p_names=>l_names,
p_reference_path=>p_portlet_record.reference_path);
//Loop through these arrays to get parameter information
htp.p('<center><table BORDER COLS=2 WIDTH="90%" >');
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(wwui_api_portlet.portlet_heading('Name',1));
htp.tableData(wwui_api_portlet.portlet_heading('Value',1));
htp.tableRowClose;
if l_names.count = 0 then
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.p('<td COLSPAN="2">'
||wwui_api_portlet.portlet_text(
'No portlet parameters were passed on the URL.',1)
||'</td>');
htp.tableRowClose;
else
for i in 1..l_names.count loop
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(l_names(i));
htp.tableData(l_values(i));
htp.tableRowClose;
end loop;
end if;
htp.p('</table></center>');
Hope it helps...
-aMJAD.

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

How to get the list of materials from Sap r/3

Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khanna

Hi Khanna,
<i> 1. Should we create DT MT MI and all (OR) not</i>
    Yes U need to create for HTTP site...for RFC U need to import..
<i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
    You create your own structres for Request and respoce.. and Map it with RFC..
<i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
    I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar.

How to get the position of the stem in control valve using slider control in the front panel

I have created a calibration program for a control valve. Signal (4-20mA) is generated from labview using slider contorl which is given to the valve via DAQ(module 9265) and again the feedback signal from the valve is acquired using DAQ(module 9203).. . There is an input ISO/ISC(Increasing signal to open/ Increasing signal to close) in the front panel.
ISO would set the output to increase from (4-20)mA further opening the valve
ISC would set the output to increase from (4-20)mA further closing the valve
I have doubt, how can i get the position of a stem

Ravens Fan wrote:
If the position of the stem is being sent to the PC through a 4-20 mA signal into your DAQ 9203 module, then you just need to do an analog input read in order to get the signal.
When reading this post, that is what came to mind... So let's see if both RavensFan & I are trying to understand the same thing... Are you saying that the position of the stem is linear (or scaled) to the amount of current sent to it? Meaning a 4mA signal would move it a certain distance, and 10mA would move another given / known distance? Or are you saying that it is calibrated so that a 20mA signal for a certain duration (ms) would move it a given distance? So the scale would be time and not current unless a lookup table is used to adjust the time duration based on the current being drawn...
It's just that I am not familiar with solenoid / drive devices that related to current.. To voltage, yes. To time, yes.. To current, I'm simply saying that I am not familiar with that. Can you tell us more about this stem (mfg / model designation)?

How to get the position of a selected cell in a table ?

Hi,
How can I get the position of a selected cell in a table or in a list multicolumn cmd ?
Thanks.

Invoke node >>> point to Row Column
Ben
Message Edited by Ben on 07-19-2007 03:14 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Point_To_Row_Column.PNG ‏22 KB

How to get the pull path name from a file upload window

Hello everyone!
I have encountered the following problem with the following JSP code:
<form method="post" action="filename.jsp">
Upload JAVA program:
<input type=file size=20 name="fname" accept="java">
<input type=submit value="go">
</form>
<%
String s = "";
if (request.getParameter("fname") != null)
s = request.getParameter("fname")
%>
The value of s is alway the filename. However I want to get the full path in addition to the filename, so that I can read the file. Does anyone know how to get the pull name of the file?
thanks a lot in advance,

Dear Sir,
thanks a lot for your reply. Please let me explain what I intended to do: I want to upload a file from the local machine and then read the content of the file. Therefore I need to the fullpath of the filename like /var/local/file.java instead of file.java. The latter is what I got.
The problem I have with your code is that the function like "request.getServerScheme()" is not recognized. Maybe is it because I didn't install servelet package? I only installed javax package btw. Also my application runns on Tomcat server if this could give you some information. The error message I had is as follows:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
[javac] Compiling 1 source file
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:133: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
url = request.getServerScheme()
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:136: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
+ ((("http".equals(request.getServerScheme()) && request.getServerPort() != 80)
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:137: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
||("https".equals(request.getServerScheme()) && request.getServerPort() != 443))
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:139: cannot resolve symbol
symbol : method getServletConfig ()
location: interface javax.servlet.http.HttpServletRequest
+ "/" + request.getServletConfig().getServletName()
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:140: cannot resolve symbol
symbol : variable path
location: class org.apache.jsp.addExercise_jsp
+ "/" + path
^
5 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:128)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:413)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:453)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:437)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:555)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

How to get the phase of signal from osilloscope?

Hellow!
Anyone can tell me how to get the phase of a signal from an osilloscope? thanks!

If you can capture the whole waveform data you could try running it through an FFT to get the phase information of a complex signal. If it is a simple signal you would have to define phase information relative to what? If you have a dual channel scope you can calculate the phase difference between them. Please give a little more information as to what your trying to see.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to get the position category field from PO13?

Similar Messages

Maybe you are looking for