How to get the printout of TDS Certificate for Sec-194I and 194H in SAP

Dear Experts,
I have a requirement at the time of taking printout of TDS Certificate for Sec-194I and 194H Printer got hanged and could not be able to take printout.But when printer got OK,user took printout of the said TDS certificate but Acknowledgment Number is not getting print.
How can i get the printout of certificate with acknowledgment Number and all details.
Yours' help would be appreciable.
Thanks&Regards

Hi
This link will be of use to you.
http://www.sapficoconsultant.com/pdf/Extended%20Withholding%20tax%20configuration.pdf
Also check the SAP Notes 1046758, 1094944, 1062383
Regards
Sanil

Similar Messages

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How can I get the apps that I paid for on iTunes and the app store I don't have a computer I paid for them using my ipad and everytime I try to redownload them it asks for my card number and when I put the number in it tells me that the number is not a wo

Ok can anyone tell how I can get the apps that I paid for on iTunes and the app store using my I pad because I don't have a computer and when I try to redownload the apps it keeps asking me for my card number and when I give it my card info it says that it's an invalid number when I know that it's not

If you are getting an 'invalid security code' message then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to get the difference of two dates in years,months and days

Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanks

Something like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2             select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3             select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4             )
5 -- end of test data
6 select c_start_date, c_end_date
7        ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8        ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9        ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT        YRS      MNTHS        DYS
17-NOV-06 21-JAN-08          1          2          4
21-NOV-06 17-FEB-08          1          2         27
21-JUN-06 17-JUL-08          2          0         26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too.

Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears.

Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears. I've tried rebooting several times but nothing happens. Please help!

Hi,
Please try resetting preferences?
On Windows: Goto %appdata%\Adobe\Elements Organizer\12.0\Organizer folder and rename the files “psa.prf” (to say psa_old.prf) and “status.dat” (to say status_old.dat).
Try launching Organizer and see if it launches fine.
Thanks
Andaleeb

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

How to get the elements out of a for loop simultaneously during the loop execution

Hi,
I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
Thanks,
Athira
Solved!
Go to Solution.

You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier. (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals.... Shivers are already crawling up my spine).
You could use a queue, but that might be an overkill, unless: the count is generated faster than it is being read elsewhere...
As crossrulz mentionned, can you describe what you will be doing with the count? Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
Hope this helps.
EDIT:
You have not fully provided the answer. We figured that much of your code from your description, but what is reading the value of the count? Is it in a separate loop? If not, it may only deal with the first value, which is likely 0. The proper advice depends on how you process the received data (count).

I'd like to know how to get the SIM Network Unlock PIN for my DROID2 GLOBAL

I am living in Haiti and I made someone buy a Droid2 Global for me in USA. I have had the phone for 2 months but I never could operate it. Any time I open it, it requires that I enter a SIM Network Unlock PIN that I have not.
I' d appreciate you help me get the SIM Network Unlock PIN for my Droid2 Global which IMEI is the following: {edited for privacy}.
Many thanks in advance

LatachaM_VZW wrote:
If the incorrect PIN code is entered too many times, a PIN Unlock Key must be obtained from Verizon Wireless at 908-559-4899 if you are outside of the United States and 800-922-0204 or *611(send) from your mobile number inside the United States..
The SIM PIN option is only available when the handset is in GSM / UMTS mode. Refer to Network Mode Setting for further assistance.
Thank you, LatachaM_VZW
Are you talking about the PUK code (when the PIN for the SIM has been wrong too many times)? The OP is talking about network unlock, and is using a foreign SIM. Global Services certainly wouldn't have the unlock code for a SIM that isn't theirs.
I have heard that if you do enter the incorrect network unlock code too many times, the phone becomes permanently locked (i..e cannot be unlocked even with a valid unlock code) but not everyone agrees that this is true for all phones.
Jax's post above really says it all, you will need to search the web for a service that will unlock this Motorola phone. In doing so, you might find a number of threads that say the Global has to be activated in the US before an unlock code will work. Others were able to unlock without this.

How to get the last used session id for a browser session

In HTMLDB 2.0 it is not possible to start a page with authentication without a SESSION_ID and when you start a public page without a SESSION_ID, then every time a new SESSION_ID is generated when you don't use the SESSION_ID in the URL.
In the same browser session I want to make a URL call to a HTMLDB page without a SESSION_ID and this page has to give back the last used SESSION_ID.
How can I do that?

Fred - You could record that session ID in a table. Each time your authenticated application runs, it would update that table with the "latest" session ID, perhaps using an application process. Then when you are formulating the URL to the public page from another application, you'd get the session ID from that table. Or you could use the page sentry component of your app's authentication scheme to send a cookie to the browser on every page view. The cookie would contain the session ID and the other application could access the cookie to complete the URL.
Scott

How to get the details of MIGO num/MIGO Doc year and Ref MIGO Doc item num

Hi,
Currently I am working on a requirement to post an Incoming Invoice and using the BAPI 'BAPI_INCOMINGINVOICE_CREATE' to upload the data into SAP.
In the Input file(to be uploaded to SAP) I was not getting details like REF_DOC(Document No. of a Reference Document), REF_DOC_YEAR(Document No. of a Reference Document) and REF_DOC_IT(Item of a Reference Document) and so I need to derive these 3 fields and feed into the interface parameter 'ITEMDATA' of the BAPI.
If I do not give any input values to these 3 fields, BAPI was throwing a message saying that, the mandatory fields were missing in the structure 'ITEMDATA'. So I need to pass these 3 fields mandatorily.
I have in the input fields PO Number and PO item( only from these 2 fields ) and I need to get the above fields.
So please provide me inputs as how I can get these 3 fields from the PO number and PO item.
Thanks for the help in advance.
Regards,
Vishnu.

Hi Vishnu,
The code mentioned by Vinod is OK, but You will also have to check whether the GR has not been cancelled. For this you need to add selection criteria of
Fetch the latest GR date (movement type will be 101)
select max( budat )
into w_budat
from    ekbe
where ebeln = <Po number>
and     ebelp = <po Line Item>
and     vgabe = '1'
and     bwart = '101'.
Fetch the latest material document
Select gjahr "(Reference document year)
           belnr "(Reference document No)
           buzei "(Reference document item)
from    ekbe
where ebeln = <Po number>
and     ebelp = <po Line Item>
and     vgabe = '1'
and     budat = w_budat .
Regards,
Birendra

How to get the Change Document Header details for a given date

Hi All,
Can anyone help me on this Change Document Header details(CDHDR).
Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
Thanks in advance
Regards
Chakri

HI,
Go through the documenattion of the FM u can get the details.. and also where used list
Regards,
Nagaraj

How to get the same look as flash for borders?

Hi i have selected circle and filled the circle with some color. now i want to have border around the circle so i have saelected stroke from the edit menu and applied with one pixel. how ever it is not giving a solid look as in flash. in photoshop the border looks like disolved and transparent. is there a way to get the same look as flash?

Look at the image. i have described everything there in the image itself. even when we use layer style it is the same problem. is there a way to resolve this? the text in the image is as below.
if u carefully observe the circle pointed there is a slight gap between the border and the filled color. This is not good. i dont want any gaps between the border and the filled color. I have used bucket to fill the circle and used stroke from edit menu to get the border for the circle.

How to get the US app store access for iPhone?

Hey. I moved to the US 6 months ago and I would like to connect with the US appstore with my iPhone. Even though I provide a US mastercard and a US address, I get a notification that my session has timed out with the code 5107. I need some US apps and as I live here and provide a US payment method I don't understand why I can't change it. How can I get the US app store access?

You could go to he Expresslane: https://Expresslane.apple.com and iTunes and iTunes Store for help.

How to get the list of collaboration rooms for a particular user??

Hello Experts,
I have a requirement to get the list of all the collaboration rooms for a given user. I have started developing the Web Dynpro application by reusing necessary jars required to the web dynpro application.
on some action I am trying to execute the below code:
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
which I have got from help.sap.com
But, there's some exception being raised and not able to retrieve the list of rooms.
Could somebody tell me what am I doing wrong.
Regards,
Raghu.

Hi,
the below is the code that I have used to get the list of rooms. But I'm getting into the NullPointerException .
I have added the catch block for time being, but could you please let me know the reason for NullPointerException?
public void onActiongetRooms(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiongetRooms(ServerEvent)
     IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
     try{
          IService service = PortalRuntime.getRuntimeResources().getService(IRooms.KM_SERVICE_ID);
          IRooms roomsAPI = (IRooms) service;
          String roomID = "00bd6231-fdca-2c10-919c-97bf74054b7d";
          IRoom room = roomsAPI.getRoom(roomID);
          String roomname = room.getName();
          msgMgr.reportSuccess(roomname);
     } catch (NullPointerException e) {
          // TODO: handle exception
          msgMgr.reportException("Null Error:"+e.getMessage(), true);
     catch (RoomInstantiationException e) {
          // TODO: handle exception
          msgMgr.reportException("Error :"+e.getMessage(), true);
    //@@end
Any thoughts are much appreciated.
Thanks in advance.
Raghu

How to get the printout of TDS Certificate for Sec-194I and 194H in SAP

Similar Messages

Maybe you are looking for