How to get the Purchase Order sample form to have 2 detail regions?
I would like to use the "Purchase Order" sample form as the base, and add one more "detail header" and "detail" subform to it.
So I copy and paste the "detail header" + "detail" subforms, and position them right beneath the first "detail" subform.
It works to certain extend. I can click the "Add Item" button(s), and it would expand the respective "detail" region.
The problem comes when things get expanded to the 2nd page.
Say, I first add 5 rows to the 2nd "detail" region, everything still fits in one page;
then I keep adding rows to the 1st "detail" region, and it begins to expand to the 2nd page....
everything in the first "detail" region can still fit in the first page,
the rows in the 2nd "detail" region should get pushed to the 2nd page...
but when I look at the 2nd page of the form, the "detail header" on the 2nd page is that of the "FIRST" detail header, not the 2nd detail header!!
So, when you look at the entire form, you have
First Detail Header
some First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some detail rows (can't tell if they belong to the first detail region or 2nd detail region)
This obviously is not right.
So, how do I fix it such that the Detail Header on the 2nd page is that of the 2nd Detail header???
an update:
I have found out that the detail rows on the 2nd page are all that of the 2nd detail region.
so, it's like this:
when you look at the entire form, you have
First Detail Header
all the First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some 2nd detail rows
Similar Messages
-
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
How to get the purchase order's delivery completed date in the dictionary
Hi consutant :
In me23n transaction code ,I set the delivery completed indicator mannul . I can see the state of
delivery completeed by click environment->item changes menu . But I don't find the date that I set
the state of delivery completed in the abap dictionary .
How to find that table store the date of delivery completed about purchase order ?
thanks .hi
you will get delivery date from
eket table .
and field name is eindt.
how to go there. ?
ans===>
SELECT ebeln ebelp eindt " For Delivery Date EKET
FROM eket
INTO TABLE it_eket
FOR ALL ENTRIES IN it_ekpo
WHERE ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
reward point if its usefull. -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
HOW CAN I GET THE PURCHASE ORDER RELEASE DATE
Dear All,
HOW CAN I GET THE PURCHASE ORDER RELEASE DATE - any reprot is there?
Thank you
AhmadHi,
u goto that PO and select Environment on top line .under that select header changes if u click on that u will get entire details who reased when released, date , time etc
regards,
Srinivas Kona -
How to get the first 4 chars form a var ?
Hi guys,
How to get the first 4 chars form a var ?
i.e temp type num20 value '00000000000012345678'.
how to move the first 4 chars to another var?
thx in advance.hi
use OFFESTS..
example:
var1 = '12345678'.
var2 = var1+0(4).
now var2 conatins '1234'.
thx
pavan -
How to get the sine wave sample of the input and output in the same time?
I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
Output:9263;
Input:9201
Attachments:
singal requency.vi 104 KBHello Yun_Zhu,
Your VI looks like you started from an example, and you are on the right track.
To clarify are you trying to synchronize the input and the output waveforms? If you you will need to share a time base and a start trigger. Check out the synchronization examples from LabVIEW
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
HIODAQmxSyncMultiDev.png 70 KB -
How to find the Purchase Orders from Sales Order number
Hi ...
Is there a way to write a query to find the Purchase orders
from the Sales Order number ....
I have notice the table POR9 (Purchase Order - base Document)
but it seems to be empty.
Could you please help me to figure this out,
Thank you very much
Kind Regards
Sanjayahi,
u did mistake in selecting the table
SELECT T0.DocNum FROM ORDR T0 for sales order
SELECT T0.DocNum FROM OPOR T0 for purchase order
how to find the table in SAP B1.
go to above menu view => system information. tick it(or select it)
then below status bar u can see the table and field name.
open the required form and just keep the mouse cursor on any field.
you can see the table and field name below.
hope now u can able to track the table name.
regards
sandip -
How to get the open order quantity for a material
Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
AND VAPMA~WERKS = IT_OUTPUT-WERKS
AND VBAK~AUART IN S_AUART
AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.This could help.
*& Report: zsdvr055 date written: 03/24/00 *
*& Author: Brian Huntley last update: 03/24/00 *
*& Program Title: Open Order Report *
*& Description: This report will create a list of sales documents *
*& that are open (contain at least one item that is not shipped). *
*& The report will sort by ship-to customer name and by sales *
*& document number. *
*& Tables: *
*& Files: *
*& Transactions: *
*& Changes: *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
VBAP,
VBUP,
VBAK,
VBKD,
KNA1,
VBEP,
VBFA,
LIKP,
LIPS,
EKET,
T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
VBELN LIKE VBPA-VBELN, "sales document
POSNR LIKE VBPA-POSNR, "item number
PARVW LIKE VBPA-PARVW, "partner function
KUNNR LIKE VBPA-KUNNR, "customer number
END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
VBELN LIKE VBPA-VBELN, "sales document
END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
MATNR LIKE VBAP-MATNR, "material
ARKTX LIKE VBAP-ARKTX, "description
PSTYV LIKE VBAP-PSTYV, "item category
KDMAT LIKE VBAP-KDMAT, "customer material
NETWR LIKE VBAP-NETWR, "net value
WAERK LIKE VBAP-WAERK, "currency
KWMENG LIKE VBAP-KWMENG, "quantity
ERDAT LIKE VBAP-ERDAT, "entry date
NETPR LIKE VBAP-NETPR, "net price
KPEIN LIKE VBAP-KPEIN, "pricing unit
PRCTR LIKE VBAP-PRCTR, "profit center
ERNAM LIKE VBAK-ERNAM, "entered by
AUART LIKE VBAK-AUART, "order type
VKORG LIKE VBAK-VKORG, "sales organization
VTWEG LIKE VBAK-VTWEG, "distribution channel
VDATU LIKE VBAK-VDATU, "requested date (header)
BNAME LIKE VBAK-BNAME, "name of orderer
KUNNR LIKE VBAK-KUNNR, "sold-to customer
BZIRK LIKE VBKD-BZIRK, "sales district
KURSK LIKE VBKD-KURSK, "conversion rate
BSTKD LIKE VBKD-BSTKD, "customer PO
LFGSA LIKE VBUP-LFGSA, "overall delivery status
FKSAA LIKE VBUP-FKSAA, "overall billing status
KUNWE LIKE VBPA-KUNNR, "ship-to customer
NAME1 LIKE KNA1-NAME1, "ship-to customer name
ORT01 LIKE KNA1-ORT01, "ship-to address
REGIO LIKE KNA1-REGIO, "ship-to region (state)
LAND1 LIKE KNA1-LAND1, "ship-to country
END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
KUNNR LIKE VBAK-KUNNR, "sold-to customer
KUNWE LIKE VBPA-KUNNR, "ship-to customer
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ZDATE1 LIKE VBEP-EDATU, "requested date
ZDATE2 LIKE VBEP-EDATU, "scheduled date (confirm)
ZDATE3 LIKE VBEP-EDATU, "committed date
ZQTY1 LIKE VBAP-KWMENG, "qty ordered
ZQTY2 LIKE VBEP-BMENG, "backlog qty
ZEXTD LIKE VBAP-NETWR, "backlog net value
ZDESC(30) TYPE C, "backlog description
END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
WADAT LIKE VBEP-WADAT, "planned goods issue date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
BMENG LIKE VBEP-BMENG, "qty confirmed
END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ROMS1 LIKE VBEP-WMENG, "committed qty
END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
VGBEL LIKE LIPS-VGBEL, "sales document
VGPOS LIKE LIPS-VGPOS, "sales document item
VBELN LIKE LIKP-VBELN, "delivery number
POSNR LIKE LIPS-POSNR, "delivery item number
WADAT LIKE LIKP-WADAT, "planned GI date
WADAT_IST LIKE LIKP-WADAT_IST, "actual GI date
LFIMG LIKE LIPS-LFIMG, "actual qty delivered
ERDAT LIKE LIKP-ERDAT, "date created
ERZET LIKE LIKP-ERZET, "time created
END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
VBELV LIKE VBFA-VBELV, "sales document
POSNV LIKE VBFA-POSNV, "sales document item
VBELN LIKE VBFA-VBELN, "delivery number
POSNN LIKE VBFA-POSNN, "delivery item
VBTYP_N LIKE VBFA-VBTYP_N, "document category
RFMNG LIKE VBFA-RFMNG, "qty delivered
PLMIN LIKE VBFA-PLMIN, "plus/minus flag
END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG, "order qty
CONF_QTY LIKE VBEP-BMENG, "confirmed qty
NOCONF_QTY LIKE VBEP-BMENG, "qty not confirmed
DELV_QTY LIKE VBEP-WMENG, "qty delivered
NODELV_QTY LIKE VBEP-WMENG, "qty not delivered
REMAIN_QTY LIKE VBEP-WMENG, "qty remain to get conf date
REQ_DATE LIKE VBEP-EDATU, "request date
COM_DATE LIKE VBEP-EDATU, "committed date
DELV_QTY1 LIKE VBEP-WMENG, "preceding delivery qty
REMAIN_QTY1 LIKE VBEP-WMENG, "qty remain to get reqest date
REMAIN_QTY2 LIKE VBEP-WMENG, "qty remain to get commit date
THIRD_QTY LIKE VBEP-WMENG, "3rd party no PO qty
SO_STOCK LIKE MSKA-KALAB, "sales order stock
ZPRICE LIKE VBAP-NETPR, "unit price USD
ADRS1(40) TYPE C, "concatenated city and region
ADRS2(45) TYPE C, "city, region and country
ADRS3(80) TYPE C, "name, city, rgn, ctry
ZCNTR TYPE I. "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA INTO TABLE TVBPA
WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA APPENDING TABLE TVBPA
WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
CLEAR ITAB0.
MOVE TVBPA-VBELN TO ITAB0-VBELN.
APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
VBUP~POSNR = VBAP~POSNR
INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
VBKD~POSNR = VBAP~POSNR
INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
IF NOT S_KUNWE IS INITIAL.
CLEAR TVBPA.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = ITAB-POSNR PARVW = 'WE'.
IF SY-SUBRC <> 0.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = '000000' PARVW = 'WE'.
ENDIF.
MOVE TVBPA-KUNNR TO ITAB-KUNWE.
ELSE.
CLEAR ITAB-KUNWE.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
PARVW = 'WE'.
IF SY-SUBRC <> 0.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
PARVW = 'WE'.
ENDIF.
ENDIF.
IF NOT ITAB-KUNWE IN S_KUNWE.
DELETE ITAB.
CONTINUE.
ENDIF.
get ship-to customer address info
SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
WHERE KUNNR = ITAB-KUNWE.
MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
IF ITAB-LFGSA = 'A'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select schedule lines for SO item and write to internal table itab2a
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2A BY WADAT.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
LOOP AT ITAB2A.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
LOOP AT ITAB2A WHERE BMENG <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDLOOP.
get request date for SO item
IF NOCONF_QTY <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NOCONF_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NOCONF_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NOCONF_QTY.
ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
LIKP-ERDAT, LIKP-ERZET)
WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
CLEAR LIPS.
SELECT POSNR VGBEL VGPOS LFIMG
FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
CLEAR VBUP.
SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
IF VBUP-WBSTA = 'A'.
CLEAR ITAB3.
ITAB3-VGBEL = LIPS-VGBEL.
ITAB3-VGPOS = LIPS-VGPOS.
ITAB3-VBELN = LIKP-VBELN.
ITAB3-POSNR = LIPS-POSNR.
ITAB3-WADAT = LIKP-WADAT.
ITAB3-WADAT_IST = LIKP-WADAT_IST.
ITAB3-LFIMG = LIPS-LFIMG.
ITAB3-ERDAT = LIKP-ERDAT.
ITAB3-ERZET = LIKP-ERZET.
APPEND ITAB3.
ENDIF.
ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
IF SY-SUBRC <> 0.
IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
DELV_QTY1 = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
CLEAR LIKP.
SELECT SINGLE ERDAT ERZET
FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
WHERE VBELN = ITAB4-VBELN.
IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
AND LIKP-ERZET < ITAB3-ERZET ).
DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
get request dates for SO item
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to itab2c
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
REMAIN_QTY1 = DELV_QTY1.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
REMAIN_QTY2 = DELV_QTY1.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
IF ITAB3-WADAT <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB3-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue'.
ELSE.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue date'.
ENDIF.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
IF ITAB-LFGSA = 'B'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
select schedule lines for SO item and write to internal table
REFRESH ITAB2A.
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY1 = DELV_QTY.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY2 = DELV_QTY.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
LOOP AT ITAB2A.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
REMAIN_QTY = DELV_QTY.
LOOP AT ITAB2A.
IF ITAB2A-BMENG <> 0.
IF ITAB2A-BMENG <= REMAIN_QTY.
REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
ELSE.
ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
REMAIN_QTY = 0.
ENDIF.
ENDIF.
ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
IF NOCONF_QTY >= NODELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NODELV_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NODELV_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NODELV_QTY.
ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
IF ITAB-FKSAA <> 'C'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
REFRESH ITAB4.
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDLOOP.
loop thru PO's for SO item
LOOP AT ITAB4.
select delivery lines for PO item
SELECT EINDT EBELN EBELP MENGE FROM EKET
INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING EKET-MENGE REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING EKET-MENGE COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = EKET-EINDT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = EKET-MENGE.
ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
ENDSELECT.
ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
IF DELV_QTY < ITAB-KWMENG.
THIRD_QTY = ITAB-KWMENG - DELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING THIRD_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING THIRD_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE2 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = THIRD_QTY.
ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
DESCRIBE TABLE ITAB1 LINES ZCNTR.
IF ZCNTR = 0.
WRITE: / 'No Data Found for Selection'.
STOP.
ENDIF.
SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
LOOP AT ITAB1.
IF ITAB1-ZDATE1 = SPACE.
ITAB1-ZDATE1 = '99991231'.
ENDIF.
IF ITAB1-ZDATE3 = SPACE.
ITAB1-ZDATE3 = '99991231'.
ENDIF.
get SO item detail
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
AT NEW KUNWE.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
WHERE KUNNR = ITAB1-KUNNR.
CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY ' '.
CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY ' '.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
FORMAT RESET.
SKIP.
ENDAT.
print out backlog detail
CLEAR T171T.
SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
WRITE: /1 ITAB1-VBELN,
13(6) ITAB1-POSNR NO-ZERO,
21 ITAB-MATNR,
41 ITAB-ARKTX,
83 ITAB1-ZDATE1,
95 ITAB1-ZDATE3,
107 ITAB1-ZDATE2,
119 ITAB-ERNAM,
129 ITAB-BZIRK, 135 T171T-BZTXT,
157(20) ITAB-BSTKD,
179(12) ITAB1-ZQTY1 DECIMALS 0,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2,
225 ITAB1-ZDESC.
AT END OF VBELN.
SKIP.
ENDAT.
print footing at ship-to customer
AT END OF KUNWE.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
SKIP 2.
ENDAT.
AT LAST.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE: /1 'Report Total:',
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
ENDAT.
ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
REQ_DATE = SPACE.
EXIT.
ELSE.
REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE FTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE FTAB INDEX TAB_INDEX.
REMAIN = REMAIN + FTAB-WMENG.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
COM_DATE = SPACE.
EXIT.
ELSE.
COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE CTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE CTAB INDEX TAB_INDEX.
REMAIN = REMAIN + CTAB-ROMS1.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT. -
How To Prevent the Purchase Order from Holding!
Hi Experts,
We use the method CHECK in BADI ME_PROCESS_PO_CUST to check custom data in purchase order, if error occurs then some error messages will be issued. We use below statements to issue error messages and also set the PO invalidate:
INCLUDE mm_messages_mac.
mmpur_message_forced 'E' 'ME' '083' text-097 '' '' ''.
CALL METHOD IM_HEADER->invalidate( ).
ch_failed = 'X'.
Actually the BADI works well. But we try to prevent the user from HOLDING the purchase order if the BADI issue the error messages. It seemd that we can not get over this problem by BADI ME_PROCESS_PO_CUST. Can any friends give me some advice on the problem?? Thank you in advance.
Joe
Edited by: Joe on Dec 1, 2010 5:31 PMHi Faheem,
Thanks very much for your help. Your idea really works, but other problem occurs if we use this idea. If we issue an error message in EXIT_SAPMM06E_013 to prevent PO from being holding, all the PO data ( include header and items etc,) are cleared by program.
At last, we negotiated with users and take a non-program step to prevent the PO from being hoding.
Thanks.
Joe
Edited by: Gangrong Chen on Dec 7, 2010 10:45 AM -
How to get the Purchased item details in R12
Hello everyone, am using Oracle Application R12,
I need the following details for the all purchased item,
how to get the item_id,item_name,vendor_name,ordered_quantity,rec eived_quantity,
returned_quantity.
Thank you.
Regards,
Gurujothi.Hi Gurujothi,
pl.try the following SQL. it will give you complete details of purchasing.
SELECT A.SEGMENT1 PO_NO, B.LINE_NUM, C.SHIPMENT_NUM,
C.QUANTITY,C.QUANTITY_ACCEPTED,C.QUANTITY_BILLED,C.QUANTITY_CANCELLED,C.QUANTITY_RECEIVED,C.QUANTITY_REJECTED,D.QUANTITY QUANTITY_RETURNED,
B.ITEM_ID,E.DESCRIPTION,F.VENDOR_NAME
FROM PO_HEADERS_ALL A , PO_LINES_ALL B , PO_LINE_LOCATIONS_ALL C , RCV_TRANSACTIONS D, MTL_SYSTEM_ITEMS_B E , PO_VENDORS F
WHERE A.ORG_ID = &OU_NAME
AND A.PO_HEADER_ID = &PO_HEADER_ID
AND B.PO_HEADER_ID = A.PO_HEADER_ID
AND C.PO_LINE_ID = B.PO_LINE_ID
AND D.PO_LINE_LOCATION_ID (+) = C.LINE_LOCATION_ID
AND D.TRANSACTION_TYPE (+) ='RETURN TO VENDOR'
AND E.INVENTORY_ITEM_ID = B.ITEM_ID
AND E.ORGANIZATION_ID = C.SHIP_TO_ORGANIZATION_ID
AND F.VENDOR_ID=A.VENDOR_ID
regards
sanjay -
How to get the purchase value for a purticular price.
Hi guru's,
I want to get the purchase value for some materials, in a particular plant and in a particular month. How can I get this data.
waiting for replies
thanks
tuljasingh.Hi,
Refer report ME1P - PO Price History.
Else Use Reports;
ME2N - PO List by Document No
ME2M - PO List by Materials
ME2L - PO List by Vendors
ME80FN - General Analysis of Purchase Orders -
Is there any function module to get the purchase order conditions from EONP
Hi,
I want to get the EONP and EONH table details for the purchase orders with the help of function module. Can anyone tell me any function module name which would give me those details.
Thanks,
AtanuHi
Check with BAPI function module BAPI_PO_GETDETAIL and BAPI_PO_GETDETAIL1.
Regards
Srilaxmi -
How to get the back order quantity for sales Order
Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm -
Need to find how to relate the purchase order table with account assignment
i need to reterieve the account assignment from the table bbp_pdacc, what is field or any tables that is between BBP_PDACC and Purchase order number or the purchase order items. I am working on the SRM system
Jacques-Antoine,
You can't directly translate a repeating node or element (such as an Item or a Project Task from the Accounting Coding Block of an Item) to a singular node or element.
The reason is that, though your use case may have the elements assumed to be the same for all items, this isn't necessarily the case, so ByDesign won't assume that you can use that kind of logic.
The simplest approach would be to do an On-Save at the Root node of the Purchase Order along the following lines:
this.projecttaskpo = this.Item.GetLast().ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID;
i wouldn't actually recommend this code.
You'd need validations for IsInitial, IsSet, and those kinds of functions.
i'd at least use some foreach loop to check that all the accounting coding blocks were for the same task, raise warnings if they weren't, etc.
Maybe you are looking for
-
OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network
Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it... Modular Design Large legal sized Scanner Standard/Legal Paper Printer Copy E Print Capabil
-
How to avoid blinking / moving of rows in a data grid when you restore the scroll positions
By Default when an update is made on a data grid, it scrolls to top row. To avoid this when we save the vertical and horizontal scroll positions and restore the scroll positions after the update, it causes a blink in the grid (or moving / jumping) of
-
Hi experts, I have requirement. I need to display the Column name of tables in my first prompt. Based on selected column data will display in the report. But data is very large volum. So i want to have an serach box in report. So that user can type s
-
IT SAY TO ME ALWAYS ERROR IN ACCESS TO CONVERSION BUT ALL IS OK AND i HAVE PAY FOR THIS YEAR ALSO I HAVE UNISTALLED AND INSTALLED AGAIN NO RESULT ON MY TELEPHONE IT FUNCTION CORRECTLY IT HAPPEN FROM 3 DAY SOMEONE KNOW HOW TO SOLVE ? THANKS
-
Facebook Sign Up for Secure Zone
Hi, Hope some one can help me out. I have been trying to use facebook module to sign up for my website. The idea is to use facebook to register, and forward them to their account page. So, I have followed three tutorials, and I seem to miss something