How to get the query design element meaning with the technical name ?

In BI 7.0 query designer, we got error msg in Transport Connection like:
Object 41PPHH3DICYQ56L2XJGXDRSMT is already being
edited by user_id
Choose 'Display object' or 'Cancel'.
How to check what design element is for 41PPHH3DICYQ56L2XJGXDRSMT? And what could cause the above error?
We will give you reward points!

You can collect the query and its elements in the transport connection. The under the technical name you will find this and the element.
Hope this helps.
Kumar

Similar Messages

The query contains a formula with the operator SUMCT

I m trying to get query ready for Webi, getting the error as 'The query contains a formula with the operator %RT. Therefore, the query cannot be released for OLE DB for OLAP'
I have not used any kind of s %GT, %RT, %CT, SUMGT, SUMRT, SUMCT and LEAF, also i have suppressed results / over results from the query, over to it, i have removed the calculate results as 'summation' feature and set to 'not defined' for all of my key figures.
Still getting the error...
Please suggest.
Niraj

hi,
Ensure that all Link IDs are visible in the lsdal.ini file located in the \Windows\system directory of the PAS Server as those are then available to all users. The lsdal.ini file may not be correctly updated if: - You have created the BI Link IDs while using PAS in Client Server Mode - You have enabled multi user access for remote desktop. In this case an additional lsdal.ini file may appear in the user specific Windows directory of someone who may have remotely connected to the system to create the Link ID. That additional lsdal.ini file will only be valid for that specific user.
Also try adding "ODBOSECURITY=0" entry to the end of the c:\windows\lsserver.ini file on the server.
hope it helps
regards
laksh

How do get a 3GB video on youtube with the best quality?

I'd like to upload my 8 min, 3GB, 960x720 movie from FCP 7 to youtube. I tried Quicktime Conversion format (mpeg4, h264, etc) but it always squahes the image to 4:3. If I output directly to Quicktime Movie the ratio is correct but then it's too big to load to Youtube.
I'm not too terribly bright and have been struggling with this for a while. I've seen some great looking video on youtube but can't figure out how to get my videos to look half way decent.
Thanks ahead of time for any suggestions!

Try this: Export as QT Movie. Open Compressor. File>New Batch from Template; Choose your 8 min movie as source: choose the You Tube preset. Publish.
Russ

How to get Acrobat Pro to save docs with the pdf icon in Finder

At the moment when I save docs as pdfs the icon is just a grey rectangle. I would prefer the red and white pdf icon which is easier to see etc.

click on the File or files in what ever folder you have to select. To choose multiple files hold down ⌘key - and click on each. To select
On one file just hold down ⌘ - type I key (Get Info)
Click on Open with
Click on button just under the word Open With: and selecet desire application in case of of a PDF would be Acrobat or Reader.
Below that choose Change All
You will be asked whether to "Open all files of this type with <whatever application you choose>"
Close get info and all PDF will show the crobat or Reader Icon.

Does anyone know how to get my apple id to agree with the id on my ipad?

I have not been able to change my iphone id to match the id on my ipad2

Go to the App Store App on your iPhone.
Go to the main "Featured" page, and scroll all the way to the bottom.
Select your Apple ID, and tap sign out.
Sign back in with the correct credentials.

WarningAlert() how to get a preference key to use with the "Do not show again" checkbox

Dear all
I user WarningAlert() in aiuser.h to show alert for use. In this component have checkbox compoment.
But I don't know method to get status of checkbox ?
Could you tell me the method or solution to get value of checkbox compoment status, please.
Thanks

For those who are interested, I found the answer in the following thread:
Cannot access PCD object from WD (DynPage works fine...)

How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

When, on my home page, I click on the link "popup transparent" in the query, "Did you mean: popup transparent", NO RESULTS appear in that new tab; how fix?

I've been having trouble due, apparently, to a file named popuptransparent[dot]xul, of which I have 3 instances on my computer (running Win XP/Firefox latest v.). Using my AVG home-page window, I search for "popuptransparent" (to try to fix it) and the results appear OK. But then when I click, for a new tab, on the link "popup transparent" in the query, "Did you mean: popup transparent", NO RESULTS appear in that new tab. Further, when I then reload the AVG panel that searched for "popuptransparent" in the first place, it, too, now shows no results. Nor does a Google panel now show any results. They show the quantity of results but just white screens for the results themselves.
The links https://support.mozilla.org/en-US/questions/948804?esab=a&as=aaq and https://support.mozilla.org/en-US/questions/952141?esab=a&as=aaq don't help me. I have re-installed Firefox v. 20.0.1 to no avail. How to fix it?
Should I delete from my computer all 3 of those [dot]xul instances?

Thanks to jscher! With some help from AVG my AVG & Google browser panels now work OK. But I've taken the advice & disabled several extensions including the Disconnect. The browsers are still OK after re-launching them so I keep fingers crossed.
My original problem was that I had suddenly found a small popup window appearing, over the browser window, that I couldn't get rid of. It contained an advisory to the effect that Windows couldn't find the file popuptransparent[dot]xul. I tried searching for that to see what it was and in the course of doing that I seem to have executed it. Then was when the trouble started.
I have 3 instances of that file in my computer and would dearly like to get rid of them if they are of no use to me. Any advice there?

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

How can i reuse a structure in the query designer in 3.5

Hi all,
we are using the version BW 3.5, now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

HI Richard,
Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
1) Structures
2) Keyfigures
3) Dimensions
then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
1) With Key figures
2) Without Key Figures
If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
Regards
ReddY A

Unable to get into query designer in Dev

Hi BW Gurus,
I am trying to get into query designer to do modifications to query in Dev server. But it is not allowing me to enter. It is displaying the following messages.
BEx Transport request is not available or not suitable
Choose another request
with the above messages I am trying to enter query designer. But it is in display mode only but not in editable mode. So kindly guide me how to solve this. I have to change the query.

it means there is no transport request availabke to chenge your query.
RSA1>transport connection>click 'create transport requets for Bex' (truck icon with BEX)>select your package->change>assign a request if you have already(or create new one)->continue.
log off and log into Bex.you will be able to change your query now.

If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page'

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page' is there a way to change 7.0 to have 'row' instead of 'page'? We would prefer to see how many rows of data we have. I didn't know if this was a parameter they may be able to be changed.
Thanks,
Diane

I donot think there is way to display Row instead of Page.
Also in 7.0. It is based on cells.

Providing access to Variables in the Query Designer

Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!

Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

Curerency conversion for a Formula in the query designer

Hi
I have a ' Financial Loss Formula' in the report. I want to convert this 'Financial Loss' into USD Currency at query designer level.
Source Currency = SAR
Target Currency = USD
So how can i do the curerency conversion for a Formula in the query designer.
pls let me kow
kumar

Hi,
If you define your query conversion in BW then it is easy to do currency conversion through Bex.What you need to do is use calculated key figure instead formula and do a right click select properties there at the currency translation area you ca select defined currency conversion in BW and your target currency.
/people/rasim.manavoglu/blog/2007/04/30/currency-currency-currency
Regards.

How to get the query design element meaning with the technical name ?

Similar Messages

Maybe you are looking for