How to get the red slider to show

Hi.
My ipad 4 is in recovery mode. So i tried to fix it. Step one was to plug in the usb cable to the computer. I did. Then I turned off my ipad 4 next. Then the next step was to press and hold the sleep/wake button for a few seconds until the red slider appears. I did do that but the red slider didn't appear at all. What do i do?
Thank you.

The iPad is in recovery mode so all you need to do is plug it into a computer that has iTunes installed. iTunes on the computer should then prompt you the iPad is in recovery mode. Simply follow the prompts to restore the iPad to factory settings.

Similar Messages

Can anyone help me figure out how to get the red number to show up

I see on the website that if you have an appointment that day a red number will come up like it does for the text, email or missed calls. Can some one let me know how to set this up or if it doesn't work like that.
thanks,
Zippyb

bucksaddle wrote:
It only comes up when you have a received a new meeting request via exchange or MobileMe and disappears once you have dealt with it (accepted, declined, etc). It isn't a reminder that you have an appointment on a particular day.
Cheers
Exactly, except for the one minor correction above.

HT201263 I cannot get my phone to turn off - cannot get the red slide to show up.

The only "movement" I see from my phone after updating to the new softward is the apple and the bar below it. It starts to fill and locks up at 50%. I have disconnected the phone from the computer. What do I do?

Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

Guided access has Ben activated no password I can not get the red slider bar to shoe up when I hold the off and the home bottom down, it comes back to sarfri , I also tried over ten times to enter a passcode, but no go

Guide access has been activated, never set a pass word,I can not get the red slider to come up by holding the off and home button, tried entering a wrong pass word 10 time to reset it but it will not . Can only use Safari.

Step by step, how did you arrive at seeing this agreement?

How to get the current slide Index or Id?

I can get the selected slide of presentation use blow method.
Office.context.document.getSelectedDataAsync(Office.CoercionType.SlideRange, function (asyncResult) {
if (asyncResult.status == Office.AsyncResultStatus.Failed) {
write('Action failed. Error: ' + asyncResult.error.message);
else {
write('Selected slides: ' + JSON.stringify(asyncResult.value.slides));
But, How can I get the executor slide?

Hi,
>> How to get the current slide Index or Id?
In my option, when you select a slide, it change to current slide. So, you could use the getSelectedDataAsync method to get the current slide, and then get the index or id by using the Slice object. You could refer the link below for Slice Object.
# Slice.index property (JavaScript API for Office)https://msdn.microsoft.com/EN-US/library/office/jj715285.aspx?f=255&MSPPError=-2147217396
Some key code as below:
<script>
function getText() {
Office.context.document.getSelectedDataAsync(Office.CoercionType.SlideRange,
{ valueFormat: "unformatted", filterType: "all" },
function (asyncResult) {
var error = asyncResult.error;
if (asyncResult.status === Office.AsyncResultStatus.Failed) {
write(error.name + ": " + error.message);
else {
// Get selected data.
var dataValue = asyncResult.value;
write('Selected data is ' + dataValue.slides[0].index);
// Function that writes to a div with id='message' on the page.
function write(message) {
document.getElementById('message').innerText += message;
</script>
>> How can I get the executor slide?
What do you mean by this? Is this a new issue which is different from the above issue? If so, I will recommend you post a new thread for this issue and share us more information about this.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the Creative Cloud to show in the Finder window

I have Creative Cloud Photoshop downloaded to my Mac and Mac Air. On my Mac, Creative Cloud shows up in the Finder Window which makes it easy to open/save files but it doesn't show in the Finder window on my Mac Air. Anyone know how I can get it to show?

Is it possible to know which Adobe CS packages are installed on the system.
Suppose user is currently working with CS3 but also have CS4 package installed.
So can we found the complete list of installed packages.

ICloud Lock: Does anyone know how to get the email address to show so that I could contact the previous owner? Thanks in advance

Hey guys, I've just recently bought a second hand iPhone 5s off of ebay for christmas. It's cost me £260.00 plus £8.00 delivery costs I have full proof of purchase including receipts and have also already rung apple's support team as well as taking the phone to local phone repair stores it's clear to me that I have no other options than to get in contact with the phone's previous owner but, I currently cannot view the whole email address even after making an appointment with apple in Westfield yesterday they were quite adamant about me contacting the previous owner but not sure how i'm going to do that when I can't see an email address displayed clearly on the activation screen.

If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you nor find the previous owner.
You should if possible return it to eBay or the seller and ask for a refund as in this event the device is completely useless: the vendor has sold you a brick - I don't know whether eBay have a complaints procedure which might help you.

How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

Your last post is blank, which happens a lot to users who try accessing the forum through email rather than its web interface.
You are also in the wrong forum here. We don't do Ps Elements here.

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

How do I get the PDF icon to show on all of my PDF files?

how do I get the PDF icon to show on all of my PDF?

Generally the icons are a selection that is set in MS Explorer (on the PC). Depending on the version of windows, there are various ways of getting at the properties related to an icon, including what application would open the file.

How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro?

How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro? I want to be able to connect to my AppleTV.

I looked at that already. I've done everything it says: check to make sure wireless is working, make sure airplay is enabled, make sure device and apple tv are on the same network blah blah. The icon just isn't there. Unless I skipped a step. AirPlay works when I use it in the music app and in the video app, I jus can't get mirroring to work. I was looking at some other threads and mirroring doesn't seem to be working for a lot of people. Maybe I jus have to wait for an update =\

How do I get the music icon to show up on the home page? in the settings icon it shows I have all my songs downloaded.

How do I get the music icon to show up on the home page of the touch? Under the settings icon it shows the songs are downloaded.

- Move the Music app icon to the home page. It is usually easer to do it on the computer than on the iPod itself. The manual says how to move the apps.
iPod touch User Guide (For iOS 5.0 Software)
- I do not undersand what: "Under the settings icon it shows the songs are downloaded." means.

How do I get the QT controller to show (play, pause, rewind, etc.)?

Hello all. Usually I don't want the QT controller to show up on the video I have on my website. I want viewers to watch the short clips complete without messing around them. So I did something (who knows what) to ensure that the controller would not show or that viewers could download (Kiosk mode I think).
I have now added a client only section to the site where I want to add the controller back so that clients can review work and make edit notes, etc. For this they need to be able to pause, rewind, etc. I can't for the life of me figure out how I get the controller to show back up. All the trues, falses, etc.
The video is encoded as h.264. The player shows up when played native from the desktop in the Quicktime Player - just not when it's on the website.
Many, many thanks for any help.

You need to add 16 pixels to height dimension in your html code (a 320X240 video would use 320X256).
The controller is on be default and no html tag is needed. To remove the controller you would use controller="false". So you must remove those lines in your page code.
Kioskmode doesn't remove the controller. It prevents downloading of the file.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How do I get the opacity slider to appear in iPhoto?

How do I get the opacity slider to appear in iPhoto on a page in book?

There isn't one in iPhoto.
OT

How to get the red slider to show

Similar Messages

Maybe you are looking for