How to get the safari 6.0.1

hi
presently my iOS is 10.7.5 and safari version is 6.0, while updating the safari im getting 6.0.3. i am not interested at 6.0.3, can you please tell how to get 6.0.1 safari version without iOS change.
thanks in advance

It's no longer where it was on Apple's servers - only 6.0.2 & 6.0.3 now.

Similar Messages

How to get the; popular tag: back in safari. Deleted it.

How to get the POPULAR tab back in safari after deleting it. Thanks for the help.

You have to pass a parameter. An id is good.
Of course you have to get an id from somewhere in the result set right?
<a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp?id=<%= rSet.getString("id") %>"><%=rSet.getString(1) %></a></td>Then you call
request.getParameter("id");
and look up the values related to that id in the database.

How do I get the Safari application?

I need to get the Safari Application from the Leopard Install DVD. How do I do that?
I've tried downloading it from Apple.com and it says that my system is not 10.5.2 or higher. It is. My system is 10.5.4.
One expert on the Safari page explained that he felt I needed to get the application straight from the INSTALL DVD. I have the DVD here-- but I have no clue how to get one application from it. Please help if you can. Thanks. Dan

Stanley... Everytime I try to install it this way it gives me this message
You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer.
I'm running 10.5.4 All of my other browsers are functioning fine.
Disk util repair permissions. OK Verified Disk Ok. Why is it not seeing my Leopard?

How to get the list of only installed bundled application on mac os X through programmatically???

how to get the list of only installed bundled software on mac os X through programmatically???

I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger.

How to get the right format if I copy data off another source....

IWorks '08
I have a data source that I want to copy to Numbers and it posts it all in the first row, when I paste it. (Excel will automatically format it correctly). I've tried a number of different things and can't figure out how to get the data to post across the page. Can Numbers even do this?

Welcome to Apple Discussions
Could you possibly have the insertion cursor blinking in the cell rather than just having a cell selected?
If the cursor is blinking in the cell, Numbers "thinks" you want to paste all of the content in that one cell. By just selecting the cell, the data will be separated if Numbers "sees" the separations. This used to be a problem, particularly with data copied from a web page in Safari, but is mostly fixed in Numbers '09.

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get the value from databank

Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
ra

Hi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

How to get the value from the readonly field?????

Hi All,
I have a readonly field in JSF. in action class i want to get the value of that field.
How to get the readonly field value???
i am getting null if the field is readonly.
i am getting value if the field is not readonly.

I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".

How to get the value from Advanced table

Hi,
In the Advanced table have 2 LOV fields, I need LOV field value dynamically in the controller to validate the save button, if iam not selected any value in lov save button will not allow to save the data. In the table i am using 'Add another row'. How to get the lov field value in the process form request??? and how to do this requirement
Thanks
Naresh

1. You can specify required property on LOV field to "yes". For events where you wish to disable the client side validations, set the property disable client side validation to "true".
2. If above behavior is not what you are looking for, then you need to handle in AM and not CO.
a. Call an AM method from CO.
b. In that AM method, get handle of VO.
c. Iterate the VO Rows and check for your validation rules.
-Prince
http://www.princekapoor82.blogspot.com

How to get the values from html:select? tag..?

i tried with this, but its not working...
<html:select styleClass="text" name="querydefs" property="shortcut"
             onchange="retrieveOptions()" styleId="firstBox" indexed="true">
<html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
</html:select>
                    <td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>

<td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>This java script is not working at all..its not printing anything in document.write();
This is code..
<td class="rowcolor1" width="20%">
<html:select styleClass="text" name="querydefs" property="shortcut"
                         onchange="retrieveSecondOptions()" styleId="firstBox"
                         indexed="true">
                         <html:options collection="advanced.choices" property="shortcut"
                              labelProperty="label" />
                    </html:select>i tried with this also. but no use..i'm not the getting the seleced option...
function retrieveOptions(){
firstBox = document.getElementById('firstBox');
                         if(firstBox.selectedIndex==0){
      return;
    selectedOption = firstBox.options[firstBox.selectedIndex].value;
}actually , how to get the values from <html:select> ...?
my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window

How to get the values from fileds

Dear All,
Good Afternoon,
I want to set the 0 value to the fields at the time of page loading.
For this,
i tried the following ways
pageContext.putParameter("fieldid",0);
and
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
bean1.setValue(pageContext,0)
for getting the values i used
String id=pageContext.getParameter("fieldid");
but i returns null values only while it has 0 value.
how can get the 0 value from that field

Hi,
In order to set values you should use:
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
if(bean1!=null)
bean1.setText("0");
and in order to grab the values from the fields
String id=(String)pageContext.getParameter("fieldid");
Thanks,
Gaurav

How to get the safari 6.0.1

Similar Messages

Maybe you are looking for