How to get the same colored labels as in the gmail web interface?

Hi,
I would like to get the same preview in Mail.app (with different colored labels) as in Gmail. Currently, my Gmail account in synced with Mail.app, hence I have access to all my mailboxes (hence all my labels). I would like to add a rule which reads as :
if Message is in (gmail label mailbox)
then Set color to (color)
However, this feature doesn't seem to be here. Basically, how to automatically colored a message being in a given mailbox (to get a nice rainbow in my general Inbox).
Thanks in advance!
Damien

I'm pretty sure you can't do that in Mail. If you do find out, post back—I'd like to know too!

Similar Messages

  • In a gradient mesh, I can't tell Illustrator to select all points that are the same color?

    All I can find online is to highlight over an area to select multiple mesh points. That will not work in my case. I can't tell illustrator to select same color, the way it does with fills and strokes? I want to change the color and I have to click on every single point again? Ridiculous.

    Edit>Edit Colors>Recolor Art
    You can assin colors an dhe recolor art filter will only read the color at the anchor points which I think is desirable
    Look at the very warm red color color and how I change it by assingin a new color in this case a blue. Read about the Recolr Art Dialog in the help files it is bit tricky at first but does  lot of good things.
    After you get the colors you want you can turn them into a color grpups as well and you will have the swatches in your swatch panel.
    Then if you have similar colors that you wish to cahnge the same color you can use the edit color wheel and move the color selectors over one another.
    Here I turend the warm red to a yellowish color as wellas the more orange color to match the new color .

  • How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?

    How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
    Thank you.

    dadanas wrote:
    Hi Simcah, I have a similar problem. Have you found out any solution?
    thanks, dan
    You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.

  • I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

    I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • HT2486 How to print the same return label on Avery labels

    I am trying to print the same return label on an Avery 5160 and cannot. It only shows one label, not 30 of the same.
    Was on the phone with Apple support but we could not make it work either.
    Anyone knows?
    Thanks

    REDP,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How can I match a color on photoshop to a real car paint color so when printed they will be the same color?

    I want my text to be the same color as a particular car. Is there a way to use the cars paint code for this?

    Depends on where the colour comes from.  The range that printers use are from the Pantone chart, and you can convert those colours to CMYK or RGB values.  Without that sort of reference, I'm not sure it can be done.  If you have a fully calibrated system, then you could scan the maker's chart and sample it, but I don't know how accurate that would be.
    Pantone colors. Convert Pantone colors to RAL, CMYK, RGB, Hex, HSL, HSB, JSON
    How did you hope to use the information? The vehicle below is painted with just one colour, but you'd be hard pressed to get an RGB value because it looks so different depending on the angle.

  • Impossible to get ACR showing the same colors as in Bridge

    Hello,
    Usually my .NEF files (shot with a D90) appears with quite soft colors and contrast in Bridge. However, since yesterday, as soon as I use the magnifier (in the filmstrip mode) or open a .NEF file with ACR, the colors are warming up. I must have done something wrong and changed some settings, but I can't find what it is. Even if I leave the white balance on "as shot", and try all the camera profiles available (ACR 4.6, Adobe Standard, Camera D2X mode1, 2, 3, Camera Neutral,...), I can't get ACR showing the same colors as my preview in Bridge. I also tried the "reset camera raw defaults" function, didn't help either.
    I guess that if I have the same problem when I use the magnifier in Bridge without opening the file in ACR, it is because ACR still takes action to load the full image, isn't it? 
    Thanks for your help,
    Sam

    Thanks for your answer. I'll reply point by point.
    My monitors are calibrated, and I did it recently. But this is not the problem here since I can see the colors changing live on the monitor when I activate the magnifier: I click somewhere on the image with the magnifier, it takes a few seconds to load the 100% section of the image and then the colors are changing on the whole image (not only the enlarged section). Similarly, when I open the image in ACR, I can still simultaneously see the Bridge version of the image on the same monitor and they have different colors. So this shouldn't be a monitor problem.
    My color settings in Photoshop (Edit>Color settings) are set on sRGB IEC61966-2.1 and set on "preserve embedded profiles". But I don't get that point, does the color setting in PS affect the colors in Brigde and ACR when PS is not open?
    Bridge preferences: What would be useful to know, there are many preferences?! Here are a few that might be of some help: Cache: all unchecked; Advanced: all unchecked; Output: "convert multi-byte..." and "preserve embedded color profile" are checked
    ACR preferences: all unchecked except "apply auto grayscale mix when converting to grayscale"
    I didn't know how Bridge and ACR were working. But I don't understand what could have changed over the couple of days since before that, the pictures open in ACR (or zoomed in in Bridge) did look exactly the same as the preview. If none of PS, ACR or Bridge are set to apply some color corrections, where do they get this information from?
    Sorry, I forgot to give the details about the softwares. I'm using CS4 (PS 11.0.2, Bridge 3.0.0.464, ACR: 5.7.0.213) on a MacOS 10.5.8.
    I didn't know how to trash the Bridge preferences, so I did it and... that worked! Colors are not changing anymore. But what could it have been, how is this resetting different from the "reset camera raw defaults" function for example?
    Thanks for your input, it did solve my problem. I still don't understand the few things described above though, so if you have a few minutes, it would be great if you could explain them to me.

  • My husband has an iPad and I just got one for me.  We both have the same e-mail address.  The message I get when I try to set my new one up is that the Apple ID is already in use.  How do I set up with our shared e-mail account

    My husband has an iPad and I just got one for me.  We both have the same e-mail address.  The message I get when I try to initiate setup is that the Apple ID is already in use.  Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

    If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
    You will have to set up a separate iCloud account or your iPads will mirror each other.

  • HT1373 So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/i

    So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/ipod

    Download them to the computer to which the iPod is synced, re-sync.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • How do i get my team to all see the same say, ID, document using the cloud?

    how do i get my team to all see the same say, ID, document using the cloud?

    Adobe Max was a smoke and mirror show and they demonstrated "Folder Sharing" so we bought into it. Myself and 7 of my clients. After the Max show they turned it off like nobody would notice. Two weeks after they stopped the folder sharing feature they put a little notice that they had did this. Nice how they treat their loyal customers. Every month they charged us an extra $20 over a single account without the folder sharing. What good is "team work" if you can't share a folder of files. Sharing a single file at a time is a waste of time.
    After a year still no folder sharing but the same old story of "soon". Adobe is using the extra money they are "stealing" from paying clients to pay for this development. We are being forced to pay the extra money again for another year as there is no way to downgrade to a single user account. Adobe likes to use this as an excuse to continue to rob and steal from loyal user that have no choice but to deal with these crooks.
    My only suggestion is for new users not to buy the team account package. There marketing material is filled with misleading statements that gives the potential new customer the impression that they can work in teams, as if a team can  work sharing single files. This is a sign that Adobe is about the cash grab and not about the quality of software and the end user experience.

  • How do I get the same song to play on the main menu and during scene select

    I would like the music to play continuously throught the menu and scene selection. As it is I have to drag the audio file into each scene selection, and the music starts at the beginning.
    At least, is there a way to remove the awful sound track that iDVD has on the themes?
    iMac 20 core Duo   Mac OS X (10.4.8)  

    Yes I can add audio, how do I get the same song to play throughout the chapter menus? I have 30 "chapters", which are scenes from an hour of home movie. Can the same song play continuously throughout the different chater menus?. As it is now, I have to drag an audio file into every submenu, and it starts the song at the beginning for each chapter menu.
    Otherwise, that same song that is preloaded on the theme is played. I hope this makes sence, kind of hard to explain. Thanks

  • Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the problem pages?

    Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the pages where the problems are? Or otherwise, why doesn't print Apple the book how it is. Idon't need the text which couldn'be seen.

    The forum is for Logic Pro users.. I will ask the moderators to move it to a more appropriate forum for your question/subject
    Cheers..

  • HT2486 How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

    How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

    Hello,
    Avery...
    https://discussions.apple.com/thread/2588943?start=0&tstart=0
    Or...
    http://www.belightsoft.com/products/labelsaddresses/overview.php

  • When I copied my cd collection to my iTunes account, I use the view by CD option in the viewer. How can I get songs from the same album to show nder the same view, instead of making it a separate thing?

    How can i fix this problem with songs from the same album, not being organized under the same  when they are from the same CD?

    Thank you... just read up on iTunes Match.   That stinks, paying a yearly thing... but I understand everyone has to make a dollar.  I think I'm better off just picking the best songs out of my collection storing them on my computer or iPhone then selling my CD's to some used CD place.   If I ever really want to hear a song there are multiple options and if I want it... the .99 to 1.29 option is always there.
    Thank you for the information

  • I cannot get the same colors when I print an image using Elements 12 (way off) and iPhoto (Close to Monitor color)

    My image colors are over saturated and off in tone when I try to print with Elements 12 but if I take the same image in to iPhoto the colors are much closer to what I see on the monitor.  There does not seem to be a way to match the color profile of iPhoto .
    Do you have a suggestion?

    Epson replied
    Thank you for contacting Epson regarding your Epson Stylus Photo R2880.
    We have seen an increase in calls of users using 10.7/10.8 with darkness or color issues. We do know this issue is coming from Adobe programs and they are aware of it and have told customers to test this by printing a photo from Apples Preview program, something other than an Adobe program. So if you right click on a jpeg file and select "open with", choose Preview and make settings here and print, the print should come out more like you are used to seeing. If it comes out normal, then this will tell you the program is the issue and you will need to contact Adobe for a fix or an update.
    I subsequently did a color test print with Preview  from an exported photo from Lightroom 4. I used Color Sync to manage the color with my icc profile to match the paper. The color came out perfectly. I then printed the picture with LR  having the application manage the color and the reds remain washed out with an unacceptable print.
    So it looks like the problem is with Adobe, not Epson.

Maybe you are looking for