How to get the same look as flash for borders?
Hi i have selected circle and filled the circle with some color. now i want to have border around the circle so i have saelected stroke from the edit menu and applied with one pixel. how ever it is not giving a solid look as in flash. in photoshop the border looks like disolved and transparent. is there a way to get the same look as flash?
Look at the image. i have described everything there in the image itself. even when we use layer style it is the same problem. is there a way to resolve this? the text in the image is as below.
if u carefully observe the circle pointed there is a slight gap between the border and the filled color. This is not good. i dont want any gaps between the border and the filled color. I have used bucket to fill the circle and used stroke from edit menu to get the border for the circle.
Similar Messages
-
How to get the last version of flash in MSI format automatically?
How to get the last version of flash in MSI format automatically?
Roberto Neigenfind
Bravo Tecnologia
www.bravotecnologia.com.brHi Barbara,
Flash Professional CS5.5 is a 32-bit application which can be installed on computers with either 32-bit or 64-bit operating systems.
You can purchase this by Adobe's backward Licensing policy :
" Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA. "
Please check the doc : http://www.adobe.com/volume-licensing/policies.html -
"Data only" csv export. How to get the same data?
When I export to csv I get more data than when exporting to "data only". Why and how to get the same as when using "data only". I suppose it is because of some supressed lines, but why there is difference in the view (which is right) and in the export file?
I do not want to export to xls with "data only" and save as csv, because the exported csv is being read by another application, which is unable to convert it automatically.
The other way is to put constraints in the data selection for the whole report (and not by supressing lines). How to say {table.date}>=maximum({table.date}) in the in the data selection? There is not possible to use "maximum". Probably possible with array?
Thanks in advance
Edited by: Kiril Bojilov on Aug 4, 2009 12:34 PM
Ok, I managed it: I put the constraint in the group selection
Edited by: Kiril Bojilov on Aug 4, 2009 12:46 PMNew customers get more options because new customers didn't already agree to complete a 2yr contract before being able to get a new phone. If you had a line that wasn't under contract, you would get a better deal than new customers because while they pay $35 activation fee for a new line, you pay $30 upgrade fee for using an upgrade. You just have to finish your end of the deal before you can start a new one.
-
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the file size (in bytes) for all files in a directory?
How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
public static void main(String[] args) {
java.io.File f = new java.io.File("/media/disk");
// provides only the file names, not the path/name!
//String[] files = f.list();
File[] files = f.listFiles();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting. To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM -
How to get the Equipements number and desciption for the contract item ?
Hi Gurus,
How to get the Equipements number and desciption for the contract item items? It would gr8 helpful to me...
VBAP,,EQUI,,,,,,?
Thanks
KrisnaCheck with below tables :
EQUI Equipment master data
EQKT Equipment short text
EQUZ Equipment time segment
Thanks
Seshu -
How to get the same colored labels as in the gmail web interface?
Hi,
I would like to get the same preview in Mail.app (with different colored labels) as in Gmail. Currently, my Gmail account in synced with Mail.app, hence I have access to all my mailboxes (hence all my labels). I would like to add a rule which reads as :
if Message is in (gmail label mailbox)
then Set color to (color)
However, this feature doesn't seem to be here. Basically, how to automatically colored a message being in a given mailbox (to get a nice rainbow in my general Inbox).
Thanks in advance!
DamienI'm pretty sure you can't do that in Mail. If you do find out, post back—I'd like to know too!
-
i have been using firefox 3.6.16 and just upgraded to version 4 last night. actually the problem is this, in my browser the 'firefox button' and all tabes are shown in the same lane on top.
what i want is to get the default look of firefox 4 with firefox button on top and all the tabs appearing on beneath this button..(not in same lane)
am i having due to any preference setting or else? please helpIf the Firefox window is maximized, it will display the tabs in the same line as the Firefox button, it only displays them on a separate line on a non-maximized window.
-
I am based in India, and during my travel to Dubai in recent past i bought I phone 5 S. After reaching my country and i started using my new phone and i am surprised to find that it doesnt have facetime. How do i get the same??
rakeshfromkolkata wrote:
How do i get the same??
You get a new phone not made for KSA and UAE markets. There is no way to get FT on your phone as it has been permanently crippled by law. -
Findsmb not on lion.. how to get the same information
I need the list of samba share on a local network.
how can I get the same result of findsmb command available on snow leopard and not on Lion?
I need these information via command line.
How can I use command like smbutil, nslookup... or what to obtain the list of Netbios name and IP (like findsmb output).
PS: sorry for my englishAt this time it is not possible to do what you want. Genius mixes in iTunes are on iOS devices are simply going to be different.
-
How to get the elements out of a for loop simultaneously during the loop execution
Hi,
I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
Thanks,
Athira
Solved!
Go to Solution.You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier. (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals.... Shivers are already crawling up my spine).
You could use a queue, but that might be an overkill, unless: the count is generated faster than it is being read elsewhere...
As crossrulz mentionned, can you describe what you will be doing with the count? Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
Hope this helps.
EDIT:
You have not fully provided the answer. We figured that much of your code from your description, but what is reading the value of the count? Is it in a separate loop? If not, it may only deal with the first value, which is likely 0. The proper advice depends on how you process the received data (count). -
How to define the same font size,color for a text field label
hi all,
In my project i need to define the same font size & color for all the text field lables in the application.how do we can achieve this?
Thanks & regards,...or you could use declarative components....
Not sure if skinning would prevent developers from overriding a look and feel??? hmmm not sure..
Grant -
How to get the lock and block occured for the full day
Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
mins and insert its record in table which you can refer at end of the day.
This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
If you are looking for doc for troubleshooting blocking below is one you can refer
http://support.microsoft.com/kb/224453
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
How to own the same e-mail-address for different Apple-IDs
Hello
I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
Thanks for supporting me
I already raised this question in the iCloud forum, but till now nobody answered - may be the wrong sub-forumMany thanks for the answer - that's what I suspected. Anyway...
The problem I have now is, that my Apple-ID I used already for some years in order to buy apps is in the "old" format (e.g. duggy832), that means not in the form of an eMail-address. iCloud accept only Apple-IDs in the “new” format meaning in the form like an eMail-address (e.g. [email protected]).
So it needs to modify the old Apple-ID from duggy832 to [email protected] or to “transfer” – if possible – my shopping from Apple-ID duggy832 to [email protected]
Which way is possible, which is safe/secure, which is recommended?
Thanks in advance -
How To get the number of request's for a single Composite Application
Hi can any body tell how to get the number requst's for a single composite application.
Thanks
ManiHi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay
Maybe you are looking for
-
Is it possible for photos to be saved without knowledge
Today I was looking through my camera roll and between taking a picture of my dinner yesterday night and some pics before sleeping the same day, there are 40 photos that have been inserted into my cameral roll between these two sets of photos. I had
-
How do I get rid of these annoying virus scan pop-up windows?!?
Every time I get on my laptop, these stupid virus scan windows pop up and they won't go away! No matter if I press Eject or Cancel, and as you can see, there is NO option to x it out! Only the yellow and green buttons show up, but the red X button do
-
Ripped CD in iTunes Mac in "recently added" but NOT visible in "music" or searchable?
Put the CD in. Rip using normal pop up iTunes window. Done -- CD ejects. See new songs / album in "recently added". Do NOT see it in "music"! Can't search it by name of artist or anything. The files are there on disk in my iTunes Music folder -
-
Warning messages with the option to continue or cancel
I am fairly new to the world of JSF and I need to have the ability to present a warning to the user, and allow them the option to continue or to cancel. I need to do this via a message on the page with a link rather than a javascript alert box. The b
-
I'm investigating whether I can take on 'Lion' when it's released. The information states that your mac needs 'Intel Core 2 Duo'. Is this the same as '2 GHz Intel Core Duo' which is what it actually states my mac has when I click 'About This Mac'?