How to get the search function to find the correct files
i have long wondered if it was me or the system, but i am very clear finally that the search function *****.
1) i try to find a word in a document.
2) the system shows me several possibilities. chapters 16, 18, 21, etc...
3) i then bring up each one individually and search each one. some of them DON'T EVEN HAVE THE WORD OR PHRASE IN THEM THAT I AM SEARCHING FOR. what's THAT all about?
4) so i look at my real life book or search on the web. voila! there it is. chapter 14.
5) i try again. both finder search and spotlight. NEITHER SHOW ME THE CORRECT DOCUMENT. neither shows me chapter 14. they still show 16, 18, 21, etc.
this has always been VERY mysterious.
it has happened hundreds of times over the years.
i am VERY clear now it is NOT me and it IS the system.
what use is it to get a list of documents that do not have the correct criteria and NOT get the document that has the correct criteria?
is leopard as sucky?
thanks for your response.
perhaps you don't use it as much as i do?
i have been cursing this search feature for years.
i often try to find exact words in a particular book
that i have on my computer as .doc files.
and it often does not find what i want and it often
finds what i do not want. so i am very confused.
i went to system preferences. opened spotlight.
there is nothing listed under 'don't search here'...
and i have only a few things listed under 'search here.
i do not understand how that link could help my
problem.
when i search for the word inside a document or
inside a pdf, the programs find the word. but
finder/spotlight does not find it.
i still need more help.
and thanks for your response.
Similar Messages
-
hi all,
here java people have given wsdl file to me, how to do the scenario,
and how to get the wsdl file from the java people.
regards,
priyaHello Priya,
Go to http://<hostname>:50000/wsnavigator or any other UDDI server and search for the web service to be invoked
There you can find the Webservice Definition (WSDL) file.
Check this weblog:
Invoke Webservices using SAPXI
regards
Gangaprasad -
How to get the ard file of crystal reports
Hi all,
I have downloaded crystal reports from sap market place but i dont have .ard file for that how to transfer that reports into sap. How to get the ard file please help me out.
Thanks & Regards,
Murtuza Ahmed.When you click on your SAPCrystalSetup.exe and select the path to your add-on folder it will install the files and your ard file will be situated in your add-on folder. Then you can start SAP up and install it from SAP.
So if your SAP install is in your local drive your ard file for crystal reports should be here C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR
Hope this helps. -
VISA: How to get the CSV file through C/C++ code?
How to get the CSV file through C/C++ code?
I'm communicating with a USB oscilloscope using VISA.Thank you for your reply.
I am using Apache Commons File Upload. Here is the code where I got the "fi".
DiskFileUpload fu = new DiskFileUpload();
fu.setSizeMax(1000000000);
List fileItems = fu.parseRequest(request);
Iterator itr = fileItems.iterator();
FileItem fi = (FileItem)itr.next();
if(!fi.isFormField())
File tempFileRef = new File(fi.getName());
System.out.println("Field = "+tempFileRef.getAbsolutePath());
} -
The dates my photos were taken are not incorrect. Any suggestions on how to get the correct dates back?
Thank you Winston. This works and I can adjust several photos at the same time.
-
How to get the update file without using Nokia Sof...
The network connection is unreliable and downloading the firmware update using PC Suite for my Nokia E90 proves difficult. Does anyone know how I can get the firmware version 300.34.84?
The trouble is Nokia's Software Updater does not accommodate any slight interruption to the connection during the update process. I will update this discussion with what version of PC Suite I have once I get that info.
Any help is kindly appreciatedIn fact, it is not Possible to get the update file without using Nokia Software Updater or you should search the net to find the update files in another place and even you get them, you can not use them with NSU.
You can Update your Device with:
1 - NSU (Nokia Software Update)
2 - FOTA (Firmware Over The Air) for FP2 devices ONLY.
3 - Nokia Care Center
there is not other way to upgrade.
Hope useful for u.
regards
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA -
How to get the upload file from a html form ?
I have a <input type=file ...> control in my form, and the user use that
control to submit a file
to my web server. The porblem is the getParameter() function of
HttpServletRequest only return the
filename. Does anyone know how to get the file body ?
Frances
http://www.servlets.com/jsp/examples/ch04/index.html#ex04_17
Frances Fan <[email protected]> wrote:
> I have a <input type=file ...> control in my form, and the user use that
> control to submit a file
> to my web server. The porblem is the getParameter() function of
> HttpServletRequest only return the
> filename. Does anyone know how to get the file body ?
> Frances
Dimitri
-
How to get the correct size of the loaded swf file?
final public class main extends Sprite
public function main()
loaderInfo.addEventListener(Event.COMPLETE, _onLoadCompleted);
private function _onLoadCompleted(event: Event): void
var tw: int = stage.width;
var th: int = stage.height;
var tsw: int = stage.stageWidth;
var tsh: int = stage.stageHeight;
Above is my simple as3 project in flex builder 3.
My screen resolution is 1920*1080, when debugging, the swf is stretched to the full client area of the IE, but the stage.stageWidth is 500 and the stage.stageHeight is 375, both the stage.widht and stage.height are 0, who can tell me why and how to get the right size of the swf file, named the client area size of the IE in this situation?
Thanks very much!The HTML wrapper might resize the SWF later, so wait a frame and check stageWidth/stageHeight again.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
How to get the EXCEL file from web site (b2b) into SAP system?
Hi Guys,
I have a requirement of saving the excel file that has been send to SAP system from a B2B site.
Currently there is a call to the SAP system from the B2B site via an RFC function ,this RFC functions gets the excel file as an input to the SAP system,i need to store this Excel file in the SAP (as an excel file itself).
How can i acheive this?
Please suggest.
Thanks ,
SwatiYou can extract a date portion and assign to the variable and then compare with GETDATE()
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
How to get the Output File Name as One of the Field Value From Payload
Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
BopannaHi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup -
How to get the local file system path of an image that loaded into the image component in cq5?
Hi,
I'm having hard time uploading image from filesystem where as drag and drop works.
I'm not getting a path of image selected from filesystem.
here is my code..
private String populateImage() throws Exception {
if (currentNode != null && currentNode.isNode()) {
Node ImageNode = JcrResourceUtil.createPath(currentNode, "image",
null, "nt:unstructured", true);
imageUrl = ImageNode.hasProperty("fileReference") ? ImageNode.getProperty("fileReference").getValue().getString() : "";
imageUrl = imageUrl.trim();
log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE IF IS: " + imageUrl);
} else {
imageUrl = properties.get("fileReference", "");
imageUrl = imageUrl.trim();
log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE ELSE IS: " + imageUrl);
return imageUrl;
So if I drag and drop..
ImageNode.hasProperty("fileReference") is returning a valid path
but if I upload an image it is returning Null.
So how to get the path? any suggestions around would be appreciated...When you say path you mean you want the path to print out in your HTML? Is that accurate? If so you generally need to constructe that path based on the path to the current component. So if you component is located at /content/mysite/en/about/mypage/jcr:content/parsys/image then the path to the image would generally be something like /content/mysite/en/about/mypage/jcr:content/parsys/image.img.jpg/1283829292873.jpg. The .img. selector triggers the servlet associated with the foundation parbase - /libs/foundation/components/parbase/img.GET.java. The reason you reference it this way is that there is no filesystem path to the image - it is stored in the repository not on the file system, and it requires a servlet or script to ge the binary from the repository and steam it.
Normally the way you'd construct this is to use the out of the box Image class - so look at /libs/foundation/components/image/image.jsp. Now this example assumes that your component where you loaded the image extends /libs/foundation/components/parbase. If it doesn't then you either have to change your sling:superResourceType to /libs/foundation/components/parbase or some other component that does exten /libs/foundation/components/parbase. -
How to Get the Source File Path in the Receiver Side
Hi Experts,
Here We are Trying to Do How to Get the Sender Information ( File Name & Path ) on the Receiver Side .
According to the Michal Blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here we Are Able to Get only the File Name.
But If I Want to get the Total File Path Also means What Should I Do Here ????
Please Let Me Know
Regards
KhannaKhanna,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey fkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
DynamicConfigurationKey dkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String fname = conf.get(fkey);
Sring path = conf.get(dkey);
String final=fname""path;
return ""final"";
Best regards,
raj. -
How to get the .class file for the extended Controller .java file
Hi,
I did the below steps.
1. Created New OAWorkspace
2. Created New project
3. Imported the page .xml file
4. Added new .java file by extending the controller class
5. Added code in the .java file.
6. Ran the .xml file
As I copied all the folders from Unix box, the page was opened.
But My question was where can I see the .class file the extended controller. It's a .java file. How to compile and get the .class file for this .java file. If I get this .class file, I can go to the page and click the personlize page. and change the Controller name to the new path by ftp ing the new class to the cust.oracle.apps.pos.changeorder.webiui.
Please let me know how to create the .class file.
Thanks,
HPAll are Java files are stored in JDEV_INSTALL_DIR:\jdevhome\jdev\myprojects\
In your case the path java would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myprojects \cust\oracle\apps\pos\changeorder\webui\
AND
Once you compile the java file in Jdeveloper, Class files get generated @ below path
In your case the path of class would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myclasses \cust\oracle\apps\pos\changeorder\webui\
Duplicate Thread-
Thanks
--Anil
http://oracleanil.blogspot.com/ -
How to get the SQL file name in SQL*plus
hi all,
I have created two sql file at C drive as "c:\Createtable.sql" and "c:\Deletetable.sql"
afterwards i open
C:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 30 11:37:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: scott/tiger
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @C:\Createtable.sql'
Table created.
SQL> @'C:\Deletetable.sql'
Table dropped.
SQL>My problem is to get the name of the file as "c:\createtable.sql" and "C:\Deletetable.sql" in sql*plus enviornment.
Thanks & Regards
SinghDear Damorgan,
>>your version number to three decimal places
My Oracle DB Version i have already stated in my previous post is 10.2.0.1.0
Actually my problem is to get the sql files name we run in sqlplus enviornment with @ symbol. like
i have created one sql file in c drive as
"C:\Createtable.sql"
afterwords i have connected to sqlplus as
sql> conn scott/tiger
sql>@c:\createtable.sql
Now i want some query to get the name of the file which is run.
In actual my problem is as
i have suppose 10 or more SQL files in some folder ( sql1.sql, sql2.sql, sql3.sql ....).
i created one file to call all the 10 sql files (main.sql)
i have also one track_table which will keep track that which sql file is runned.
I want some automated script which will insert the record in that track_table....... for that i need the name of sql file which is runned.
Hope this will help you.
Thanks & Regards
Singh -
How to get the right file name in an attachment
I have design a program to get the attach file from an attachment. But when I click the link to save the file, the default name of the file is 'attach' whenever I get different files. Who know what is the problem, please tell me the truth.
Here are some codes of the program.
download.jsp
<%="test.doc"%>
web.xml
<servlet-mapping>
<servlet-name>AttachmentServlet</servlet-name>
<url-pattern>attachment</url-pattern>
</servlet-mapping>
AttachmentServlet.java
public void doGet
Message msg = folder.getMessage(msgNum);
// the message I get is right and the name of the file in
// the attach in this message is right too.(I have printed)
Multipart multipart = (Multipart)msg.getContent();
Part part = multipart.getBodyPart(partNum);
ContentType ct = new ContentType(sct);
response.setContentType(ct.getBaseType());
InputStream is = part.getInputStream();
int i;
while ((i = is.read()) != -1) {
out.write(i);
out.flush();
out.close();The trick that I used is to append the URL with the name of the file. So if your url is "http://domain.com/attach", use "http://domain.com/attach/filename.doc". IE and Netscape parse the URL to determine what the filename is, so by placing this text at the end, you essentially let the browsers know what the filename is. :)
I have design a program to get the attach file from an
attachment. But when I click the link to save the
file, the default name of the file is 'attach'
whenever I get different files. Who know what is the
problem, please tell me the truth.
Here are some codes of the program.<< snip >> -
How to get the correct value from check box
hi guys,
here is a program to read data from IKPF.
with the user tick on the check box, the program will retrive
corresponding records based on the inventory counted (zstat) status.
however i don't get the correct output with the following selection.
Please advise where is going wrong. Thank you.
IF ph_ncnt = 'X'.
v_zstat1 = SPACE.
ENDIF.
IF ph_pcnt = 'X'.
v_zstat2 = 'A'.
ENDIF.
IF ph_acnt = 'X'.
v_zstat3 = 'X'.
ENDIF.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
b~menge into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat3 OR
a~zstat = v_zstat2 OR
a~zstat = v_zstat1 )
and a~gjahr = p_gjahr.hi guys,
i'll use the following to get the desire result. This is a bit "stupid" but at least it gives me the correct result.
IF ph_ncnt = 'X'.
v_zstat1 = SPACE.
ENDIF.
IF ph_pcnt = 'X'.
v_zstat2 = 'A'.
ENDIF.
IF ph_acnt = 'X'.
v_zstat3 = 'X'.
ENDIF.
IF ph_ncnt = SPACE AND ph_pcnt = SPACE
AND ph_acnt = SPACE.
message I799(SA) with 'Which data to print?'.
stop.
ELSEIF ph_ncnt = 'X' AND ph_pcnt = 'X'
AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X' AND ph_pcnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat1 OR
a~zstat = v_zstat2 )
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X' AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat1 OR
a~zstat = v_zstat3 )
and a~gjahr = p_gjahr.
ELSEIF ph_pcnt = 'X' AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat2 OR
a~zstat = v_zstat3 )
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat1
and a~gjahr = p_gjahr.
ELSEIF ph_pcnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat2
and a~gjahr = p_gjahr.
ELSEIF ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat3
and a~gjahr = p_gjahr.
ENDIF.
Maybe you are looking for
-
How can i Sign back in the App Store to Download apps
-
I am trying out 64 bit'sXPpro/SP and have Audigy Sound Blaster?ZS 2 Platinum hardware?I asked Creative if they had a CD or a full download - no, they said, but there are updates. Ha,Ha! Yes driver and a few other?updates totalling?49 MB and many item
-
Hi, Do anyone of you have any documentation on Jetform designing and resolving issues related to jetforms. thanks & regards, Bala.
-
Keeping generated Java files???
How do I keep the generated java source code when my jsp pages get compiled. I have the following in my properties file: weblogic.httpd.register.*.jsp=weblogic.servlet.JSPServlet weblogic.httpd.initArgs.*.jsp=\
-
Speakers/Headphones Emitting "clicking/popping" Noise
I am having a really hard time explaining this, so please bear with me while I try to explain it. I purchased my macbook pro at the end of January. A few weeks later, I noticed that there was a "clicking" or "popping" noise coming from the laptop. Th