How to get the SelectionProxy "Selection Square/Dot" into my own TreeView?

Hi!
I have built my own TreeView in a panel plugin. This TreeView contains document objects, just like the Layers Panel does. In the Layers Panel each treenode (e.g. a layer, an <rectangle>, any node item) has a "SelectionProxy" on the right side (the little square/dot that gets colored in the layer's color if you click it). I want to add such a SelectionProxy to my TreeView Node Items. I have found in the "open" folder that there's apparently (part of) the source code of the layers panel. However I can't find documentation of any sorts that would be helpful to what I'm trying to do.
I've gotten so far that I know that I need to add 2 boss classes, kLayerPanelSelectionProxyBoss and kPageItemSelectionProxyBoss.
Class
kLayerPanelSelectionProxyBoss,
kBaseWidgetBoss,
IID_ISELECTIONPROXYDRAWDATA, kSelectionProxyDrawDataImpl,
IID_ICONTROLVIEW, kSelectionProxyViewImpl,
IID_IDRAGDROPSOURCE, kProxyViewDragDropSourceImpl,
IID_IEVENTHANDLER, kLayerProxyDragDropSourceEHImpl,
IID_ITIP, kProxyWidgetTipImpl,
Class
kPageItemSelectionProxyBoss,
kLayerPanelSelectionProxyBoss,
IID_IDRAGDROPSOURCE, kLayerZOrderDragDropSourceImpl,
However I can't find anything on IID_ISELECTIONPROXYDRAWDATA. Maybe someone has done this already and can guide me a little bit. I'm grateful for any help!

soo... turns out i forgot to declare the interface in the *ID.h file. *facepalm*.

Similar Messages

How to get the previoulsy selected value in a combobox

How to get the previoulsy selected value in a combobox. i WANT the current and the previously selected value of the combobox.

Just add to combobox ItemListener. When item is changing in itemStateChanged arrives 2 events. ItemEvent.DESELECTED and ItemEvent.SELECTED with corresponding item's values. Just write something like this:
        comboBox.addItemListener(new ItemListener() {
            Object prevValue;
            public void itemStateChanged(ItemEvent e) {
                if (e.getStateChange() == ItemEvent.SELECTED) {
                    //do what you need with prevValue here
                } else {
                    prevValue = e.getItem();
        });

How to get the old selection in ListSelectionListener valueChanged() method

Hi,
Is anyone know how to get the old selection index/value in the ListSelectionListener valueChanged() method? The list.selectedValue() always return the same value which is the new selection. The ListSelectionEvent.getFirstIndex() and getLastIndex are always firstIndex <= lastIndex so that you cant' tell which one is the old selection.
Please help and thanks!

Just test the two indexes (first and last): if the corresponding row is selected, then the other is unselected. That gives you the old (unselected) and new (selected) item.
Of course, I have supposed that you were using a SINGLE_SELECTION model...
Hope this helped,
Regards.

How to get the default selection color from JTable

Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-Jenny

The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );

JTree: How to get the currently selected node

How do I get the currently selected node in JTree?
getLastSelectedPathComponent() this method always return the last selected node and not the current one.
Thanks in advance
Sachin

Use
TreePath selectedPath = tree.getSelectionPath()If your tree allows multiple selections, use
TreePath [] selectedPaths = tree.getSelectionPaths() this will return an array of all selected tree paths.
Once you get the tree path, call the treePath.getLastPathComponent(). this should tell you the currently selected node.
Hope this helps
Sai Pullabhotla

VS2013 / Team Explorer vsix - How to get the currently selected build definition?

Greetings,
My goal with a simple extension is to right-click any build definition and if my "Show Build Def Stats" menu item is selected, pop a message box with some summary details I plan to pull from the IBuildDefinition interface.
I'm missing something fundamental I'm sure, but I cannot figure out how in the menu handler the actual build definition that I clicked on.
The menu command is added where I want it successfully:
Symbol info used to get this there:

<GuidSymbol name="guidTeamExplorerBuildDefContextMenu" value="{34586048-8400-472E-BBBF-3AE30AF8046E}" >
<IDSymbol name="menuBuildDefinitionContext" value="0x109"/>
</GuidSymbol>
I am stumped as to how to get the fact that I clicked the "ISRepository" build definition in either the Initialize() or MenuItemCallBack() methods, I haven't come across the right service or container object that I recognize.
Much obliged!
--Jordan

I have been investigating this for a while using .NET Reflector and finally I got it:
In VS 2013, add references to the following assemblies in the folder C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer:
Microsoft.TeamFoundation.Controls.dll
Microsoft.TeamFoundation.Build.Controls.dl
And then use this code:
Microsoft.TeamFoundation.Controls.ITeamExplorer teamExplorer;
Microsoft.TeamFoundation.Controls.ITeamExplorerPage teamExplorerPage;
Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt buildsPageExt;
teamExplorer = base.GetService(typeof(Microsoft.TeamFoundation.Controls.ITeamExplorer)) as Microsoft.TeamFoundation.Controls.ITeamExplorer;
teamExplorerPage = teamExplorer.CurrentPage;
buildsPageExt = teamExplorerPage.GetExtensibilityService(typeof(Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt)) as Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt;
foreach (Microsoft.TeamFoundation.Build.Controls.Extensibility.IDefinitionModel definitionModel in buildsPageExt.SelectedDefinitions)
System.Windows.Forms.MessageBox.Show(definitionModel.Name);
* My new blog about VSX: http://www.visualstudioextensibility.com * Twitter: https://twitter.com/VSExtensibility * MZ-Tools productivity extension for Visual Studio: http://www.mztools.com.

How to get the parameter from Java Script into the Parameter crystal Report

Hi All,
Crystal Report is integrated with Oracle 10g. I created the base SQL query for col1, col2, col3 and col4. Java Script pass parameter value (185) to Col1.
My question is how to create crystal report to make Col1 as parameter and how to get the parameter value 185(Col1) from Java Script. Is there any additional code I need to include in the crystal report?
FYI.
Java script sends the right parameter value.There is no issue in java script.
This is an automatic scheduled process when batch runs, Java script should pass the parameter value and the crystal report should get the value and produce the output report.

Not sure if this is an application question or if you are trying to hook into Crystal Reports parameter UI? If the later then no option other than report design. If an application then I can move this to the Java Forums.
If you are asking how to alter the parameters I suggest you remove the Java reference and post a new question so it's not confusing the issue.
Please clarify?

I am thinking of buying a MacBook Air and am wondering how to get the content of my iPad into iTunes.

I have iTunes on an old pc and am thinking of buying a MacBook Air. I am wondering how to get the content of my iPad on to the Mac as I know that sync only happens in one direction, from pc to device. I assume therefore that when I attach my pad to the new Mac it will sync to an empty iTunes and I will have lost all the content of my pad. I know I can restore purchases, but what about contacts, calendar, photos and music not purchased from apple. I have a fairly recent backup on a pen drive but it is a usb2 device and is formatted for a pc. Any advice would be appreciated.

Do I copy my media library or from a backup. I have a backup on my pc and on an external drive. This drive is usb2 and formatted for windows so I can't connect it to a MacBook Air to make the transfer. Equally I don't think there is a way to connect the 2 computers via a cable ie usb2 one end and usb3 the other. Will the computers talk to each other via wifi if I enable home share although I think this is only for music which still leaves contacts, mail etc.
I am sorry to be such an ignoramus but any further help would be appreciated.

How to get the data from multiple tabes into single table

hi all,
here i am having 10 data base tables,how to get the data into a single table.
regards,
subba reddy

hi,
non XI/PI related
Regards,
Michal Krawczyk

How to get the current selected value of a combo box or a option button?

Hello All,
I want to catch the current selected value of a combo box and also of a option button and want save it into different variables in my code. These option button and combo box are in a SAP business one form which I have created through VB dot.net coding.
But I don't know how to do that, can any one send any example code for this.
Regards,
Sudeshna.

Hi Sudesha,
If you want to get the selected values you can do it as follows: The Combo Box value you can get from the combo box. If you want to get it on the change event, you must make sure that you check when BeforeAction = False. If you want to get an Option Button value you should check the value in the data source attached to the option button.
        Dim oForm As SAPbouiCOM.Form
        Dim oCombo As SAPbouiCOM.ComboBox
        Dim oData As SAPbouiCOM.UserDataSource
        oForm = oApplication.Forms.Item("MyForm")
        oCombo = oForm.Items.Item("myComboUID")
        oApplication.MessageBox(oCombo.Selected.Value)
        oData = oForm.DataSources.UserDataSources.Item("MyDataSourceName")
        oApplication.MessageBox(oData.ValueEx)
Hope it helps,
Adele

ECC6.0 t-code COOIS - how to get the "Profile" select-option list

Hi PP Gurus
We are implementing ECC6.0
We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
My question is regarding standard transaction COOIS.
I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
There are only the following items (select-option screen of COOIS in ECC6.0):
-LIST
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
-LIST
-PROFILE
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
Questions:
1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
What I have already explored:
u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
THANK YOU.

Hi,
The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
The navigation profile is adjacent to the icon called Environment (its a drop down list).
Revert if you face any issues.
Regards,
Vivek

How to get the row selected in af:inputComboBoxListOfValues

Hi,
Am using jdev 11.1.1.2.1.
Am using af:inputComboBoxListOfValues component , i have made the component based on the " department id" and the display value is " department name".
In the value change listener i want to get the selected department id but currently am getting only the department name.(using valueChangeEvent.getNewValue().toString())
So is there any way to get the entire row and get the "department id" using that ??
Please help.
Thanks,
Hari

Sorry for the confusion, needed to check it out:
this code should work:
    public void nameValueCangeListener(ValueChangeEvent valueChangeEvent) {
        FacesContext contxt = FacesContext.getCurrentInstance();
        valueChangeEvent.getComponent().processUpdates(contxt); // after this the new row is selected!
        BindingContext lBindingContext = BindingContext.getCurrent();
        BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry();
        JUCtrlListBinding list = (JUCtrlListBinding) lBindingContainer.get("YOUR_LIST_BINDING_NAME");
        Row lFromList = (Row)list.getCurrentRow();
        Object lAttribute = lFromList.getAttribute("YOUR_ATTRIBUTE_YUO_WANT_TO_GET");
    }Timo

URGENT - how to get the checkbox selected data from datatable.

Hi
I have some dynamic data. which will be displayed as checkbox. User can select the checkboxes in jsp. after selection when I submit the page I wanted to get the list of checkbox data the user selected.
Here is the following code. when I submit the form the method which is mapped in bean (dostuff() method) is not calling. it is simply displaying the same page. Could you please tell me where I am doing wrong.
please give me suggestion what I should to get the checkbox data in bean.
My Code JSP:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<h:form>
<h:dataTable id="xxx" var="person" value="#{checkboxBean.beans}" >
<h:column><h:selectBooleanCheckbox value="#{person.checked}"/></h:column>
<h:column><h:outputText value="#{person.id}"/></h:column>
</h:dataTable>
<h:commandButton id="details" action="#{checkboxBean.doStuff}" value="do Stuff"></h:commandButton>
</h:form>
</f:view>
public class CheckboxBean {
private static final Logger logger = Logger.getLogger(CheckboxBean.class);
private List beans = null;
public CheckboxBean() {
logger.debug("CheckboxBean()");
public String doStuff() {
logger.debug("doStuff()");
logger.debug("Some Bean selected data :" );
return "test";
public List getBeans() {
beans = new ArrayList();
SomeBean[] someBeans = new SomeBean[3];
someBeans[0] = new SomeBean("first Person", false);
someBeans[1] = new SomeBean("2nd Person", true);
someBeans[2] = new SomeBean("third person", false);
beans.add(someBeans[0]);
beans.add(someBeans[1]);
beans.add(someBeans[2]);
logger.debug("Inside getBeans()");
return this.beans;
<managed-bean>
<description>Checkbox bean.</description>
<managed-bean-name>checkboxBean</managed-bean-name>
<managed-bean-class>com.view.bean.CheckboxBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
* Created on Mar 17, 2006
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
package com.view.bean;
public class SomeBean {
private boolean checked = false;
private String id ;
public SomeBean() {
public SomeBean(String anId, boolean bool) {
super();
this.id = anId;
this.checked = bool;
public String getId() {
return this.id;
public void setId(String id) {
this.id = id;
public boolean isChecked() {
return this.checked;
public boolean getChecked() {
return this.checked;
public void setChecked(boolean checked) {
this.checked = checked;
public String toString() {
return "Id: " + id + ", checked :" + checked;
}

Hello,
If you post in ASP.NET forums, you'll get more help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the error raised in LoginModule into the error.jsp page?

Hi,
I would like to get the Exception message raised in a LoginModule and display it "friendly" into my error.jsp page.
How to do that?
Thanks.
Stephane

I have posted this question a few times. These forums are useless for all but the simplest of problems.
Here is what you can do, of course it is unsupported, and may or may not break with a future release - all I can say is that it works in 10.1.3
In your loginmodule login() method, add the JAZNContextCallback to your callbacks array, then after the callbacks are handled you can access the request in the following way:
HttpServletRequest request = (HttpServletRequest) ((JAZNContextCallback)callbacks[2]).getContextObject(JAZNContextCallback.HTTP_SERVLET_REQUEST, null);
You can then add the error message to the request and your jsp or whatever will be able to access it.
By the way, JAZNContextCallback is contained in the jazncore.jar file.

How to get the output of a program into the email program.

hi
i had created a java mail program and the keygeneration program.seperately.
i want to get the keygeneration into my email program.that should be sent along with the text message.so pls help me in this regared.
i had pasted my coding her
email pgm.
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
To use this program, change values for the following three constants,
SMTP_HOST_NAME -- Has your SMTP Host Name
SMTP_AUTH_USER -- Has your SMTP Authentication UserName
SMTP_AUTH_PWD -- Has your SMTP Authentication Password
Next change values for fields
emailMsgTxt -- Message Text for the Email
emailSubjectTxt -- Subject for email
emailFromAddress -- Email Address whose name will appears as "from" address
Next change value for "emailList".
This String array has List of all Email Addresses to Email Email needs to be sent to.
Next to run the program, execute it as follows,
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "smtp.mail.yahoo.com";
private static final String SMTP_AUTH_USER = "xxxx";
private static final String SMTP_AUTH_PWD = "xxxx";
//private static final String emailMsgTxt = "Online Order Confirmation Message. Also include the Tracking Number.";
private static final String emailSubjectTxt = "Order Confirmation Subject";
private static final String emailFromAddress = "[email protected]";
private static String emailMsgTxt = "I am unable to attend to your message, as I am busy sunning"
+ "myself on the beach in Maui, where it is warm and peaceful."
+ "Perhaps when I return I'll get around to reading your mail."
+ "Or perhaps not.";
private static final String[] emailList = { "[email protected]","[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = true;
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.port", "25");
props.put("mail.smtp.protocol","smtp");
props.put("mail.debug", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
keygeneration program:
import java.io.Serializable;
     import java.security.Security;
import com.sun.net.ssl.*;
     import javax.crypto.KeyGenerator;
     import javax.crypto.Mac;
     import javax.crypto.SecretKey;
     public class Eval {
     public static void main(String args[]) throws Exception {
     String inputString ="0x0b0b0b0b";
     KeyGenerator keyGen = KeyGenerator.getInstance("HMACMD5");
     SecretKey secretKey = keyGen.generateKey();
     Mac mac = Mac.getInstance(secretKey.getAlgorithm());
     mac.init(secretKey);
     byte[] byteData = inputString.getBytes("UTF8");
     byte[] macBytes = mac.doFinal(byteData);
     String macAsString = new sun.misc.BASE64Encoder().encode(macBytes);
     System.out.println("Authentication code is: " + macAsString);

I'm not sure what's confusing you. Just generate a String (using a StringBuffer)
with the data you need and use it as the content of the mail message. If each
recipient needs different content, they'll each need a different MimeMessage
object.

How to get the SelectionProxy "Selection Square/Dot" into my own TreeView?

Similar Messages

Maybe you are looking for