How to get the Subject of Mail Greater than 50 Characters length
Hi Friends,
I am sending a mail by using the Class Interface cl_document_bcs and method create_document
there the Parameter i_subject is of 50 characters length
but the client need the subject of the mail nearly 100 chars lenght
Please guide me how to go furthur
are there any other Methods to go furthur to have subject of the mail greator than 50 characters lenght
Thanks in Advance
Ganesh
Hi Ganesh
Its not possible to use more thatn 50 characters in send mail step for subject. May be you can try with the FM SO_NEW_DOCUMENT_ATT_SEND_API1 with more than 50 line in the subject.
Regards
vijay
Similar Messages
-
hello,
i have one requirement,
i need what are the settings are required for the configuration and tell me how to do?
when i raised the PO, the po goes to vendor, vendor has accepts the po or rejects the po.
suppose the vendor accept the PO, or rejects the PO, the byer should get the mail how to do,
what are the setting are required for this.
My prerequesites
1)in material master --purchasing view click the Acknowlegge field.
2) in Inforecord click the acknowledge field.
3) while creating the PO select the acknowledge field in item detail tab(confirmation)
4)email Id taken from Pur grp
tell me what are the settings are required to get the mail from vendor.
Regards
sapmanyes,,, vendor may not use SAP.....But he has seen the PO in other media(portal),,,
suppose he rejects the PO,,, or accepts the po,,, how the buyer get the mail?
plz explain me -
How to zero the values that are greater than 0 at time 0?
Hello, New user,
I would like to know how to zero values that are greater than 0 at time 0. I am totalizing gas flow and understand how not to add the negative numbers but am unsure about the positive numbers at 0 flow. I hope I have explained this good enough.
Thank you,
LisaI don't understand why the value which should be 0 is actually greater than 0.
How do you determine that the value should be 0, such as no flow, even if the value is greater than 0?
Ryan Shi
Hello Ryan,
The system itself may have an offset of 0.1 V which in the program is related to flow. I do not wish to add this .1 as flow. I want to beable to reset the values to 0 and then when there is flow, to add the flow. If you purchase a program from some vendors you can zero the channel, that is my goal. I want this to be automatic when a switch is pressed. Such as: for 20 seconds, average channel, and use that value as 0 flow then add flow?? I was told averaging may work??
Thank you again,
Lisa Williamson -
I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)
AMoriyama wrote:
I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine. By clicking on it you can navigate through it any way you like, just as you would normally.
Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
- or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff. -
i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally. -
Apple Mail - how to get the first word in a sentence to auto-capitalize
How to get the first word in a sentence to auto-capitalize
Anwarsomething to look forward to then, because we get used not to use our shift button any more, since iPhone and iPad do it for us. entourage and other ms stuff do it. pages does it too now (put it on in the auto-correct in preferences). bizarre however some loose the capitalization when you copy the text. pages to stickies or mail does not. that's good !
-
How do I get the folders in Mail to be listed alphabetically?
How do I get the folders in Mail to be listed alphabetically? When I add a folder it appears at the bottom of the list and I can't drag and drop it in the primary list to its appropriate postion, I can only drag it to subfolder status.
Thanks,
MJTYou should create your mail folders on the iCloud server (under ICLOUD in Mail), not locally on your Mac (under ON MY MAC) for them to show up on other devices and at iCloud.com.
Anything stored locally on your Mac only exists on that specific Mac so leave all your mail on the server and organise it there. -
I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy photos and videos to a DVD.
Connect your iPhone to your computer. Tp your pc should recognize your iPhone as a camera. Use what ever application you have on the pc to transfer files from a camera to your computer.
-
I can't figure out how to download a pre-ordered movie from iTunes. I have the receipt but don't know how to get the movie on my touch. Can anyone help me please?
I ment format as PDF or DOC, I actually figured it out just messing around. An yes I ment email. Thank you so much for replying to my confusion.
-
How to get the FILE COUNT from File directory
Hello,
i have to develop a scenario like, get the file count from source file directory and validate whether the file count is 5 or not. if 5 files exist i need to process those 5 files to DB tables. if file count is not equal to 5 then i need to send a mail to customer that files are missed at source directory. (subject as files were missed at source directory and in content i need to display the file names exist at source file directory. So that missed file will be generated by the customer based on this mail).
Could you please let me know how to get the count of files from source file directory. if it is possible only with UDF please provide the Java code
Best Regards,
SARANDo these files have some fixed names?
Can you try to use the option Advanced Selection For Source File to make XI pick all 5 files in one shot?
Check this blog on the same -
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
If this is not a option - BPM sounds the only possible way.
Regards,
Bhavesh -
How to get the values of the objects inside an object??
Hi,
I am trying to write code to display name and memory usage of all session attributes, in a recursive way.
I suppose reflection is needed here, but I cant figure out how to get the values of the objects inside an object...
private void handleIt(String attributeName, Object attributeValue) {
boolean isPrimitiveOrNull = ((null == attributeValue) ||
(attributeValue.getClass().isPrimitive()));
if (isPrimitiveOrNull) {
sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "}");
} else {
sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "{");
Field[] fields = attributeValue.getClass().getDeclaredFields();
int lim = fields.length;
String name;
Object value = null;
for (int i = 0; i < lim; i++) {
name = fields.getName();
//LOOK AT THIS LINE: !!!!!!!!!!!!!!!!!!!!!!!!!!!
value = fields[i].get(obj); //I don´t know what 'obj' should be??
handleIt(name, value);
sb.append("}");
Any suggestions will be greatly appreciated...I realized that massive int objects called MAX_VALUE, MIN_VALUE and SIZE where causing the StackOverflow, so I removed them from the analysis.
This is the resultant code. But I think it isnt accurate in calculating the real size of objects being got using reflexion.
Do you or somebody have any more suggestions?
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.ObjectOutputStream;
import java.lang.reflect.Field;
import java.util.Enumeration;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
public class SessionMeasurer extends HttpServlet {
private static final long serialVersionUID = 1470488362727841992L;
private StringBuilder sb = new StringBuilder();
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
performTask(request, response);
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
performTask(request, response);
public void performTask(HttpServletRequest request, HttpServletResponse response) {
HttpSession session = request.getSession(false);
String attributeName = "";
Object attributeValue = null;
for (Enumeration<?> attributeNames = session.getAttributeNames(); attributeNames.hasMoreElements();) {
attributeName = (String)attributeNames.nextElement();
attributeValue = session.getAttribute(attributeName);
handleIt(attributeName, attributeValue);
System.out.println(sb.toString());
private void handleIt(String attributeName, Object attributeValue) {
if (attributeValue != null) {
boolean isPrimitive = attributeValue.getClass().isPrimitive();
if (isPrimitive) {
sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "}");
} else {
sb.append("{" + attributeName + ":" + sizeOf(attributeValue) + "{");
Field[] fields = attributeValue.getClass().getDeclaredFields();
String name;
Object value = null;
int lim = fields.length;
for (int i = 0; i < lim; i++) {
name = fields.getName();
if (!name.endsWith("_VALUE") && !name.equals("SIZE") && !name.equals("serialVersionUID")) {
try {
value = fields[i].get(attributeValue);
} catch(Exception e) {
//PENDIENTE: Tratamiento excepción
handleIt(name, value);
sb.append("}");
private int sizeOf(Object obj) {
//Valid only for Serializables
ByteArrayOutputStream baos = new ByteArrayOutputStream();
ObjectOutputStream oos = null;
byte[] bytes = null;
try {
oos = new ObjectOutputStream(baos);
oos.writeObject(obj);
bytes = baos.toByteArray();
} catch(Exception e) {
//PENDIENTE: Tratamiento excepción
} finally {
if (oos != null) {
try {
oos.close();
} catch(Exception e) {
//PENDIENTE: Tratamiento excepción
if (baos != null) {
try {
baos.close();
} catch(Exception e) {
//PENDIENTE: Tratamiento excepción
int size = -1;
if (bytes != null) {
size = bytes.length;
return size; -
How to get the last day according to fiscal period input in selection scree
Hello expert
how to get the last day of fiscal period input.
the fiscal period inculdes 1-16
when fiscal period is greater than 12, only calculate the last day of 12nd month
your solution will be apprecaited, FM existing?
thank you
KevinHi,
when you give a particular date in any month
the following fm will give you the last date of that month
here you can give
R_FDATE-HIGH as 01 and month as the period you wnat and year for current year
concatenates '01' month year into r_fdate-high separated by '.'.
then it will give g_ltdt for that month and year which wil be the last date of that month
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_FDATE-HIGH
IMPORTING
LAST_DAY_OF_MONTH = G_LTDT
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks & regards,
Venkatesh -
I have iTunes on an old pc and am thinking of buying a MacBook Air. I am wondering how to get the content of my iPad on to the Mac as I know that sync only happens in one direction, from pc to device. I assume therefore that when I attach my pad to the new Mac it will sync to an empty iTunes and I will have lost all the content of my pad. I know I can restore purchases, but what about contacts, calendar, photos and music not purchased from apple. I have a fairly recent backup on a pen drive but it is a usb2 device and is formatted for a pc. Any advice would be appreciated.
Do I copy my media library or from a backup. I have a backup on my pc and on an external drive. This drive is usb2 and formatted for windows so I can't connect it to a MacBook Air to make the transfer. Equally I don't think there is a way to connect the 2 computers via a cable ie usb2 one end and usb3 the other. Will the computers talk to each other via wifi if I enable home share although I think this is only for music which still leaves contacts, mail etc.
I am sorry to be such an ignoramus but any further help would be appreciated. -
How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa -
How to get the Useru2019s position when the user doesnu2019t have CP relation
We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
PaulHi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew
Maybe you are looking for
-
ISight in use but is not in use
I was trying to video chat in iChat with no other programs open and my computer told me my iSight was in use, so I tried restarting my computer, opened photo booth and only photo booth and again it told me iSight was in use, so I then turned off my c
-
I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?
-
CDR-20014 Failed to save diagram
Hello, I've used the Server model guide to retrofit one schema's user. When I try to save the Server Model diagram it fails with: ORA-01036: illegal variable name/number RME-02126: Failed to bind cursor variables RME-02124: Failed to execute SQL stat
-
Missing archive file v13 download
I am getting a "missing archive file v13 elements" download and have wasted all afternoon trying to find help info on adobe web site
-
keeps telling me to install silverlight but I already did