How to get the Table Level Constraints List

hi all,
i created a table as follows,
create table temp(fld1 number, fld2 number, fld3 varchar2(10),
constraint fld1_pk primary key (fld1),
constraint fld2_uk unique (fld2) );
table has created successfully.
now i need to get list of constraints (constraint_names) in to Java.
i checked user_tab_columns table and in that i got only nullable.
how to get this one, with query;
regards
pavan

Yes!
SQL> select constraint_name, generated from user_constraints
2 where table_name = 'EMP'
3 /
CONSTRAINT_NAME                GENERATED
SYS_C003996                    GENERATED NAME
SYS_C003997                    GENERATED NAME
EMP_PRIMARY_KEY                USER NAME
EMP_SELF_KEY                   USER NAME
EMP_FOREIGN_KEY                USER NAME
5 rows selected.
SQL>Cheers
Sarma.
Message was edited by:
Radhakrishna Sarma

Similar Messages

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

How to get the Ap credit memo list?

Dear Experts,
Could you tell me how to get the AP credit memo list?
Is it standard report ?
Thanks!
Xinling

Hi,
Go to transaction code FB03 and do following steps :
1. Click on
2. Click on
3. Next Screen
Double Click on Transaction Code if it is not Green
4. Next Screen
Enter the transaction code through which you are generating Credit Memo or click on Multiple Selections in case you are using more than one.
5. Execute
Regards,
Tejas

How to get the table with no. of records after filter in webdynpro

Dear Gurus,
How to get the table with no. of records after filter in webdynpro?
Thanks in advance.
Sankar

Hello Sankar,
Please explain your requirement clearly so that we can help you easily.
To get the table records from your context node use method get_static_attributes_table()
data lo_nd_mynode type ref to if_wd_context_node.
data lt_atrributes_table type wd_this->elements_mynode.
lo_nd_mynode = wd_context->get_child_node( name = wd_this->wdctx_mynode ).
lo_nd_mynode->get_static_attributes_table( importing table = lt_atrributes_table ).
Note: You should have already defined your context node as a Dictionary Structure.
BR,
RAM

How to get the domain level values in web ui pick list

Hi Gurus,
I was added one field through EEWB transaction and i was maintained the values in domain level.now my requirement is i was added this field in web ui.but i don't know how to get the values which are we maitained in domain level. pls send me the solution it is very needful for me..
Regards,
Bixamaiah.B

Hi Bussa,
Refer to the documentation on drop-down Boxes in UI here:
CRM Web Client UI Framework [original link is broken]
This should help you, but do get back if you face any issues in implementing the same.
Regards,
Padma Guda

Bom explosion how to get the least level every stufe = 1

material number : 2t67363633
     following is the bom of that materials
   the below ouput is i got it from cs12
.1 010 6631030681
..2 010 INL025000650
..2 020 IN6631030681
.1 020 6650002622
..2 010 950002621GV
.1 030 6682500491
.1 040 712758079
but in cs13 the following output i got only the following for the same materials
.1 010 6631030681
..2 010 INL025000650 -
i got this
..2 020 IN6631030681 -
i got this
.1 020 6650002622
..2 010 950002621GV -
i got this
.1 030 6682500491    -
i got this
.1 040 712758079     -
i got this
requirement is take the least items in every level1 items
supouse if the level1 item doesnt have any subitems ,we ll take this one also
following is the detiails for the senario,using this to restrict and how to get the cs13 above output
level fld2    fld3    fld4 fld5   fld6 fld7 componentname
.1 0000001 00000097 001 00002 0001 010 6631030681 -
..2 0000001 00000093 002 00002 0001 010 inl025000650
..2 0000002 00000093 002 00004 0002 020 in6631030681-1560
.1 0000002 00000097 001 00004 0002 020 6650002622
..2 0000001 00000095 002 00002 0001 010 950002621gv
.1 0000003 00000097 001 00006 0003 030 6682500491
<b> .1 0000004 00000097 001 00008 0004 040 712758079</b>
i here attached my code for ur review
i got the output without the last leve i bold it. is there any logic to solve the problem
TABLES : MAST.
DATA: BEGIN OF ISTPO OCCURS 1000.
        INCLUDE STRUCTURE STPOX.
      DATA: END OF ISTPO.
DATA: W_TOPMAT LIKE CSTMAT.
SELECT-OPTIONS : P_MATNR FOR MAST-MATNR.
PARAMETERS     : P_WERKS TYPE MAST-WERKS.
DATA : BEGIN OF ITAB OCCURS 0,
           MATNR LIKE MAST-MATNR,
           WERKS LIKE MAST-WERKS,
           END OF ITAB.
DATA: IT_STB LIKE ISTPO OCCURS 0 WITH HEADER LINE.
data : istpofinal like istpo occurs 0 with header line.
data : istpotemp like istpo occurs 0 with header line.
START-OF-SELECTION.
CLEAR ISTPO. REFRESH ISTPO.
SELECT MATNR WERKS FROM MAST INTO TABLE ITAB
                   WHERE MATNR IN P_MATNR AND WERKS = P_WERKS.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
     MMAPS                 = ' '
     MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ITAB-MATNR
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPO
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
IF SY-SUBRC = 0.
WRITE:/ 'MaterialNumber' ,21 'Description'.
SKIP 1.
endif.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
         W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
data : ttabix like sy-tabix,
        tstufe like stpox-stufe.
data : len type i.
istpotemp[] = istpo[].
describe table istpotemp lines len.
LOOP AT ISTPO .
WRITE :/ ISTPO-STPOZ,
           ISTPO-STLKN,
           ISTPO-POSNR,
           ISTPO-IDNRK,
           ISTPO-OJTXP,
           ISTPO-MENGE,
           ISTPO-MEINS.
if sy-tabix = len.
move-corresponding istpo to istpofinal.
append istpofinal.
exit.
endif.
ttabix = sy-tabix - 1 .
if tstufe ge istpo-stufe.
read table istpotemp index ttabix.
move-corresponding istpotemp to istpofinal.
append istpofinal.
endif.
tstufe = istpo-stufe.
ENDLOOP.
*endif.
endloop.
skip 3.
loop at istpofinal.
     WRITE :/ ISTPOFINAL-STPOZ,
            ISTPOFINAL-STLKN,
            ISTPOFINAL-POSNR,
            ISTPOFINAL-IDNRK,
            ISTPOFINAL-OJTXP,
            ISTPOFINAL-MENGE,
            ISTPOFINAL-MEINS.
endloop.

Hi Shiba,
We got the required list,
But while using select-option to view multiple values the list of datas in the ISTPOFINAL gets displayed like the given below.
example
Material1
.........Component 1
.........Component 2
Material 2
.........Component 1......... From Material 1
.........Component 2......... From Material 1
.........Component 3
.........Component 4
Material 3
.........Component 1......... From Material 1
.........Component 2......... From Material 1
.........Component 3......... From Material 2
.........Component 4......... From Material 2
.........Component 5
.........Component 6
Like this it goes on for the entire list at the tie of displaying the ISTPOFINAL.
We tried evn by deleting the adjacent duplicate values still it gets displayed.
is there any problm with the loop or is it the problm with the ending of the loop.
Pls suggest us.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
      MMAPS                 = ' '
      MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ITAB-MATNR
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPO
      MATCAT                = MATCAT
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
         W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
data : ttabix like sy-tabix,
        tstufe like stpox-stufe.
data : len type i.
istpotemp[] = istpo[].
describe table istpotemp lines len.
loop at istpo.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
      MMAPS                 = ' '
      MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ISTPO-IDNRK
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPOTEMP
     MATCAT                = MATCAT
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
if sy-subrc ne 0.
move-corresponding istpo to istpofinal.
append istpofinal.
clear: istpo, istpofinal.
else.
continue.
clear: istpo, istpofinal.
endif.
*break-point.
delete adjacent duplicates from istpofinal.
endloop.
loop at istpofinal.
     WRITE :/ ISTPOFINAL-STPOZ,
            ISTPOFINAL-STLKN,
            ISTPOFINAL-POSNR,
            ISTPOFINAL-IDNRK,
            ISTPOFINAL-OJTXP,
            ISTPOFINAL-MENGE,
            ISTPOFINAL-MEINS.
clear: istpofinal.
endloop.
endloop.

How to get the variants for LAV LIST or GRID?

Hi,
How to get the variants which are stored in table like JVSO1, using function module REUSE_ALV_VARIANT_F4 ?
Thanks.

Hi,
Delcare
DATA : st_variant TYPE disvariant,       "Work area for variant
       st_variant1 TYPE disvariant.       "Work area for variant
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-041.
PARAMETERS :     p_varnt TYPE disvariant-variant MODIF ID md8. "Variant
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varnt.
*--Local Variables
DATA: l_exit(1) TYPE c.                "ALV exit
*--Call the function module to display the list of Variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant    = st_variant
      i_save        = c_save
    IMPORTING
      e_exit        = l_exit
      es_variant    = st_variant1
    EXCEPTIONS
      not_found     = 1
      program_error = 2.
*--Check Subrc
IF sy-subrc <> 2 AND l_exit IS INITIAL.
    p_varnt = st_variant1-variant.
ENDIF.
start-of-selection.
IF NOT p_varnt IS INITIAL.
    CLEAR st_variant1.
    MOVE st_variant TO st_variant1.
    MOVE p_varnt TO st_variant1-variant.
*--Call the function module to check the variant exist
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        i_save     = c_save
      CHANGING
        cs_variant = st_variant1.
    st_variant = st_variant1.
ENDIF.
DATA : lv_repid TYPE sy-repid.
*--Pass the Report name
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = lv_repid
      it_fieldcat             = it_fcat
      is_variant              = st_variant
      it_events               = it_events
      i_save                  = 'A'
      i_callback_user_command = 'USER_COMMAND'
    TABLES
      t_outtab                = it_zsd_ra
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE e368(00) WITH 'Alv Display failed'(044) .
ENDIF.
regards,
Prashant

How to get the table name in the trigger definition without hard coding.

CREATE TRIGGER db.mytablename
AFTER UPDATE,INSERT
AS
    INSERT INTO table1(col1)
    SELECT InsRec.col1
    FROM
    INSERTED Ins
   --Below i am calling one sp for which i have to pass the table name
   EXEC myspname 'tablename'
In the above trigger,presently i am hard coding the tablename
but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table name

I really liked your audit table concept. You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields. Wanted to share my end result.
USE [YourDB]
GO
/****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
ON [dbo].[YourTable]
AFTER INSERT,DELETE,UPDATE
AS
BEGIN
SET NOCOUNT ON;
Declare @v_AuditID bigint
IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
CREATE TABLE [dbo].[AutoAudit]
( [AuditID] bigint identity,
[AuditDate] DateTime,
[AuditUserName] varchar(128),
[TableName] varchar(128) NULL,
[OldContent] XML NULL,
[NewContent] XML NULL
ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
PK_AutoAudit PRIMARY KEY CLUSTERED
[AuditID]
) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
( [TableName] ASC,
[AuditDate] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
END
Select * Into #AuditDeleted from deleted
Select * Into #AuditInserted from inserted
While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
Begin
INSERT INTO [dbo].[AutoAudit]
( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
SELECT
GETDATE(),
SUSER_NAME(),
[TableName]=object_name([parent_obj]),
[OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
[NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
FROM sysobjects
WHERE
[xtype] = 'tr'
and [name] = OBJECT_NAME(@@PROCID)
Set @v_AuditID = SCOPE_IDENTITY()
Delete from AutoAudit
Where AuditID = @v_AuditID
AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
Delete top(1) from #AuditDeleted
Delete top(1) from #AuditInserted
End
END

How to get the table name of a field in a result set

hi!
i have a simple sql query as
select tbl_customerRegistration.*, tbl_customerAddress.address from tbl_customerRegistration, tbl_customerAddress where tbl_customerAddress.customer_id = tbl_customerRegistration.customer_ID
this query executes well and gets data from the database when i get ResultsetMetaData from my result set (having result of above query) i am able to get the field name as
ResultSetMetaData rsmd = rs.getMetaData();//rs is result set
String columnName = rsmd.getColumnName(1);
here i get columnName = "Customer_id"
but when i try to get the tabel name from meta data as
String tableName = rsmd.getTableName(1); i get empty string in table name....
i want to get the table name of the respective field here as it is very important to my logic.....
how can i do that.....
please help me in that regard as it is very urgent
thanks in advance
sajjad ahmed paracha
you may also see the discussion on following link
http://forum.java.sun.com/thread.jspa?threadID=610200&tstart=0

So far as I'm aware, you can't get metadata information about the underlying tables in a query from Oracle and/or the Oracle drivers. I suspect, in fact, that the driver would have to have its own SQL parser to get this sort of information.
I'm curious though-- how do you have application logic that depends on the name of the source table but not know in the application what table is involved? Could you do something "cheesy" like
SELECT 'tbl_customerRegistration' AS tbl1_name,
tbl_customerRegistration.*
...Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to get the table strucuture for multiple table

I need to get the table structure for more than 40 table in a .txt file, is there any query to get this.
I know how to get it individually but would be good if I can get it in one go
Regards,

You could write a procedure using DBMS_METADATA.GET_DDL + DBA|ALL|USER_TABLES
or
ask your DBA
or
get something like SQL Developer/PL/SQL Developer/TOAD...

How to get the table Event action in the controller???

HI
Based on my requirement i have extended my controller,but i want to perform some validation like ,,,,
i have table in one region ,in which one column is having a Button (flex field) action with image,
i want to write the code in the controller according to the validation ,,,,but i am unable to find the event action in the main controller,
how to get the event action ?,,,,, of the item type as image
thanks in advance
Kash

If not you can use image component with clientListener and serverListener to preform your requirement set clientListener click event and then inside clientListener java script method call the
serverListener then will execute serverListener method.

How to get the max(level)?

Hi,
The below query returns level and other selected columns.
I need to get the max(level) 2nd column value in the below example.How to modify the query?
Ex
Level      max(level)     id
1 5 101
1 5 102
1 5 103
2 5 104
2 5 105
3 5 107
4 5 120
5 5 134
5 5 280
SELECT DISTINCT level lvl
,form_frms.emp_id
,form_frms.ing_emp_id
,form_frms.prve_id
,CASE
WHEN (select div_dn
from epm_prod epm
where epm.emp_id= form_frms.ing_emp_id) ='Y' THEN DIV_DN
WHEN NVL((select distinct 'N'
from emp_pro_version prvv
where prvv.is_py='Y' and
prvv.IS_VERSION ='N' and
prvv.emp_id=form_frms.ing_emp_id) ,'Y')='N'
THEN 'Y'
WHEN NVL((select distinct 'Y'
from employee epm
where emp.emp_id=form_frms.ing_emp_id
and epm.status<>'NEW') ,'N') ='Y'
THEN 'Y'
ELSE 'N'
END
ELSE 'N'
END UN_KNOWN_ID
FROM (SELECT empvv1.prvv_id
FROM emp_view_version empvv1
WHERE empvv1.is_version = 'Y'
) form_frms
START WITH form_frms.emp_id = :lv_emp_id
CONNECT BY PRIOR form_frms.ing_emp_id = form_frms.emp_id
ORDER BY level DESC, form_frms.emp_id,UNKNOWN_ID ASC;
Edited by: shivasha on Feb 9, 2013 12:24 AM

Maybe
select lvl,
       max(lvl) over (order by null rows between unbounded preceding and unbounded following) max_level,
       emp_id,
       unknown_id
from (SELECT DISTINCT
               level lvl,
               form_frms.emp_id,
               form_frms.ing_emp_id,
               form_frms.prve_id,
               CASE WHEN (select div_dn
                            from epm_prod epm
                           where epm.emp_id = form_frms.ing_emp_id
                         ) = 'Y'
                    THEN DIV_DN
                    WHEN NVL((select distinct 'N'
                                from emp_pro_version prvv
                               where prvv.is_py = 'Y'
                                 and prvv.IS_VERSION = 'N'
                                 and prvv.emp_id=form_frms.ing_emp_id
                             ),'Y'
                            ) = 'N'
                    THEN 'Y'
                    WHEN NVL((select distinct 'Y'
                                from employee epm
                               where emp.emp_id = form_frms.ing_emp_id
                                 and epm.status != 'NEW'
                             ),'N'
                            ) = 'Y'
                    THEN 'Y'
                    ELSE 'N'
               END UNKNOWN_ID
          FROM (SELECT empvv1.prvv_id
                  FROM emp_view_version empvv1
                 WHERE empvv1.is_version = 'Y'
               ) form_frms
         START WITH form_frms.emp_id = :lv_emp_id
         CONNECT BY PRIOR form_frms.ing_emp_id = form_frms.emp_id
ORDER BY lvl DESC,emp_id,UNKNOWN_IDRegards
Etbin

How to get the table's text headers

Hello,
I have created a certain table with 5 coloums.
I would like to get the table's coloums header text in a certain function. How do I do that?
Roy

Hi Roy,
Get teh table object ..
IWDTable t = (IWDTable)view.getElement("Table") ;
IWDTableColumn cols[] = t.getColumns();
Now loop through this cols array and use
cols<i>.getHeader()
this will give the header of each column in the table...
Rgds
Bharathwaj

How to get the inheritance level for an atribute value

hi,
i have to get the inheritance level for an attribute value for a given user in Org.struc.

Hi,
Check out table T77OMATTUS for inheritance level for an attributes
Regards,
Neelima

How to get the table name and bind columns names in an INSERT statement ?

I have an INSERT statement with input parameters (for example
INSERT INTO my_table VALUES (:a, :a, :a)) and I want to know
without parsing the statement which is the name of table to
insert to and the corresponding columns.
This is needed to generate the SELECT FOR UPDATE statement to
refetch a BLOB before actually writing to it. The code does not
know in advance the schema (generic code).
Thanks in advance,
Joseph Canedo

Once you have prepared your statement, you can execute the
statement with the OCI_DESCRIBE_ONLY mode before binding any
columns. Then you can use OCIParamGet to find out about each
column (column index is 1-based). You should get OCI_NO_DATA or
ORA-24334 if there are no more columns in the statement. Note
that the parameter descriptor from OCIParamGet is
allocated/freed internally by OCI; you do not need to manage it
explicitly. The parameter descriptor is passed to OCIAttrGet in
order to obtain for instance the maximum size of data in the
column OCI_ATTR_DATA_SIZE. You can also get the column name in
this way, although I do not remember the #define off the top of
my head. Getting the table name appears to be much more
difficult; I have never had to do that yet. Good luck. -Ralph

How to get the Table Level Constraints List

Similar Messages

Maybe you are looking for