How to get the total amount of filtered row in a table view
I have created filter tables for each columns of my tableview. Now I want to add a row with some totals. For this I use an iterator and implement the RENDER_ROW_START. It is easy to add a new lines knowing the number of expected rows (add the line at the end). But the hic comes when there is a filter. How can I know how many rows I will have in the filtered table. There is no parameters that I found. Not even in an event handler.
Thanks a lot in advance for your help
i found the solution, thanks
Similar Messages
-
How to get the total amount and hide the field
Hi Experts,
In Crystal report parameter screen, user has the option to Mutliselect either Donor or Grant or Donor & Grant; based on that in report output user is expected to see list of Donors with Grand Total. Requirement is not to split Amount by Donor rather need to show list of all Donor in header and Grant Total in Footer.
For example from the above list if user selected Algeria, Austria, Australia and India each country/Donor contribution is 150 than expected output will be
Algeria
Austria
Australia
India
America
Grand Total = 600
please let me know if any one get idea about this requirement.
Best Regard,
sowjanya.kHi Sowjanya,
If you're simply trying to place a grand total, use the 'Insert Summary' option.
Choose the measure field as the 'Field to Summarize' > Choose 'Sum' as the summary operation > Under 'Summary Location' choose 'Grand Total Report Footer'.
-Abhilash -
How to get the number of hits ("returned rows") in read table statement
Hi Experts
I have the statement shown below, which seems not to work as I would like it to. My problem is that I would like to do two different things depending on weather or not a read table statement results in 0 hits or 1 (or more) hits.
READ TABLE g_ship_item
WITH KEY
l_ztknum = DATA_PACKAGE-/bic/ztknum
BINARY SEARCH.
IF sy-subrc is initial.
no hits found
DATA_PACKAGE-/BIC/ZSTAGEERR = 1.
ELSE.
hits where found and we will do something else...
DATA_PACKAGE-/BIC/ZSTAGEERR = 0.
Hope someone can help me out of my problem...
Thanks in advance, regards
TorbenHi,
As you are using READ statement with Binary search, check whether the internal table g_ship_item is sorted with field /bic/ztknum or not. If it is not sorted then the result of this READ statement is not correct.
Below is the correct code.
sort g_ship_item by /bic/ztknum.
READ table g_ship_item with key g_ship_item = xxx.
Thanks,
Satya -
Regarding: How to Get the Tax Amount
Hai Friends,
I have the Input of Amount + Tax Group.
I need the amount for every Tax from Tax group.
How to get the Tax amount for differnt tax type.
Please help me.
Regards,
K SakthivelHai Sakthi,
As you want the report for different tax types you can differentiate different tax types by tax rate and tax code you can refer the below query and modify according to your requirement and you can add as many tax codes/tax type based on your needs.
BASED ON TAX CODE AND TAX RATE :
SELECT distinct M.DocNum AS 'AR Inv. #', M.DocDate as 'Date', M.CardName as 'Customer Name',M.NumAtCard as 'Bill No. & Dt.',M.DiscSum,M.RoundDif,
(Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)',M.VATSUM,
t.statype,
(Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry and statype =1 and taxrate=5 AND TAXCODE='CHVAT5' ) as 'CHENNAI VAT5 SALES',
(SELECT SUM(TaxSum) FROM INV4 where statype=1 and TaxRATe =5 and DocEntry=M.DocEntry AND STCCODE='CHVAT5' ) as ' CHENNAI VAT5 COLLECTED ',
(Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry and statype =1 and taxrate=0.00 AND TAXCODE='CHTAXEXE' ) as 'EXEMPTED SALES',
(SELECT SUM(TaxSum) FROM INV4 where statype=1 and TaxRATe =0.00 and DocEntry=M.DocEntry AND STCCODE='CHTAXEXE' ) as 'EXEMPTED COLLECTED ',
(Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry and statype =1 and taxrate=14.50 AND TAXCODE='CHVT14.5' ) as 'CHENNAI VAT14.5 SALES',
(SELECT SUM(TaxSum) FROM INV4 where statype=1 and TaxRATe =14.50 and DocEntry=M.DocEntry AND STCCODE='CHVT14.5' ) as ' CHENNAI VAT14.5 COLLECTED ',
(Select Sum(LineTotal) FROM INV3 Q Where Q.DocEntry=M.DocEntry) as 'FREIGHT',
M.DocTotal as 'Total (Rs.)'
FROM OINV M LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry
LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry
LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry
LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry
INNER JOIN NNM1 T4 ON M.SERIES=T4.SERIES
where (t4.series ='1' ) AND TARGETTYPE !='14'
GROUP BY
M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,M.DocTotal,M.Series,T4.SeriesName,M.RoundDif,M.VATSUM,T.STATYPE,T.TAXRATE,Q.LINETOTAL,t4.series,
Regards,
P.V -
How To Get The Total Delivered Quantity of a Sales Order
Hello All,
I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
Regards,
Pavani.Hi
Check the Table:
VBEP - Sales Document: Schedule Line Data.
Inside the table check the Quantity Fields.
Regards,
Sreeram -
How to get the total number of pages printed in a report?
Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.i found the solution, thanks
-
How to get the total pages in ALV report?
Hi guys,
Since I used page breaks can somebody please help me on how to get the total pages in ALV report?sincerely please...thanks guys.automatic display total page.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
r -
I am trying to figure out how to get the total allocated CPUs, memory and storage in a particualr reservation through vRealize Automation Java SDK.
I am trying to figure out how to get the total allocated CPUs, memory and storage in a particualr reservation through vRealize Automation Java SDK.
-
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
How to get the total execution time from a tkprof file
Hi,
I have a tkprof file. How can I get the total execution time. Going through the file i guess the sum of "Total Waited" would give the total time in the section "Elapsed times include waiting on following events:"
. The sample of tkprof is given below.
SQL ID: gg52tq1ajzy7t Plan Hash: 3406052038
SELECT POSTED_FLAG
FROM
AP_INVOICE_PAYMENTS WHERE CHECK_ID = :B1 UNION ALL SELECT POSTED_FLAG FROM
AP_PAYMENT_HISTORY APH, AP_SYSTEM_PARAMETERS ASP WHERE CHECK_ID = :B1 AND
NVL(APH.ORG_ID, -99) = NVL(ASP.ORG_ID, -99) AND
(NVL(ASP.WHEN_TO_ACCOUNT_PMT, 'ALWAYS') = 'ALWAYS' OR
(NVL(ASP.WHEN_TO_ACCOUNT_PMT, 'ALWAYS') = 'CLEARING ONLY' AND
APH.TRANSACTION_TYPE IN ('PAYMENT CLEARING', 'PAYMENT UNCLEARING')))
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 442 0.08 0.13 0 0 0 0
Fetch 963 0.22 4.72 350 16955 0 521
total 1406 0.31 4.85 350 16955 0 521
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Number of plan statistics captured: 1
Rows (1st) Rows (avg) Rows (max) Row Source Operation
1 1 1 UNION-ALL (cr=38 pr=3 pw=0 time=139 us)
1 1 1 TABLE ACCESS BY INDEX ROWID AP_INVOICE_PAYMENTS_ALL (cr=5 pr=0 pw=0 time=124 us cost=6 size=12 card=1)
1 1 1 INDEX RANGE SCAN AP_INVOICE_PAYMENTS_N2 (cr=4 pr=0 pw=0 time=92 us cost=3 size=0 card=70)(object id 27741)
0 0 0 NESTED LOOPS (cr=33 pr=3 pw=0 time=20897 us)
0 0 0 NESTED LOOPS (cr=33 pr=3 pw=0 time=20891 us cost=12 size=41 card=1)
1 1 1 TABLE ACCESS FULL AP_SYSTEM_PARAMETERS_ALL (cr=30 pr=0 pw=0 time=313 us cost=9 size=11 card=1)
0 0 0 INDEX RANGE SCAN AP_PAYMENT_HISTORY_N1 (cr=3 pr=3 pw=0 time=20568 us cost=2 size=0 card=1)(object id 27834)
0 0 0 TABLE ACCESS BY INDEX ROWID AP_PAYMENT_HISTORY_ALL (cr=0 pr=0 pw=0 time=0 us cost=3 size=30 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 350 0.15 4.33
Disk file operations I/O 3 0.00 0.00
latch: shared pool 1 0.17 0.17
********************************************************************************user13019948 wrote:
Hi,
I have a tkprof file. How can I get the total execution time.
call count cpu elapsed disk query current rows
total 1406 0.31 4.85 350 16955 0 521TOTAL ELAPSED TIME is 4.85 seconds from line above -
How to get the total no.of fields count in TFS
How to check this:
You can define no more than 1,024 work item fields in the same team project collection, and you can set no more than 1,024 fields to
reportable in all team project collections.
I have created some new fields in my customized process template. How to get the field count to check this validation. Do we have any command for this since witadmin listfields does not give the total count info.
Thanks
DivyaHi Divya,
Thanks for your post.
Try to get fields count in collection using below code snippet:
TfsTeamProjectCollection tfs =
new
TfsTeamProjectCollection(new
Uri("collectionURL"));
tfs.EnsureAuthenticated();
WorkItemStore workitemstore = tfs.GetService<WorkItemStore>();
FieldDefinitionCollection fields = workitemstore.FieldDefinitions;
// get fields count in this collection
Console.WriteLine(fields.Count);
//get each field name
foreach(FieldDefinition
field in fields)
Console.WriteLine(field.Name);
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to get the total record count in ODI
Hi
I have the interface the are file to DB.
The format is like this..
HEADER
DETAIL
TRAILER
Now will write the contains of file to DB,
But i have to insert the total count ie numberof record written from file to DB in my Trailer record.
can you tell me how can i get the total count of records in file and write it to trailer?
Also, I want the interface to rollback the data if something fails will loading the data from file., ie. if there are 100 records in file and 50 got transfer and something fails i want to rollabck the 50 records from DB.???
Thanks :)Hi
You can design a flow for Full load flow and incremental flow from flat file to Table.
Create a table at target database like.. (create table with last_execution and palce the V_FULL_LOAD value and LAST_EXECUTION_DT columns in last_execution table)
Add faltfile as table in model, create a variable as V_FULL_LOAD and make sure that the default values is 01-01-1900
Create one more variable like V_LAST_EXECUTION_DATE (in this variable write a case statement that if V_FULL_LOAD value is 'Y" then full load should happen and same time you should check that V_FULL_LOAD column is balnk then write insert statment else write update statement to update last_execution_dt column, similar for 'N')
please provide your *personal mail ID*, i will send a doc file realted to your query.
we have to tables present in work repository (SNP_STEP and STEP_LOG tables) using tables we can get how many records are inserted/updated and we can find how many records are not transfer and gor error.
Thanks
Phani -
Get the Total Amount Paid of an A/R Invoice
Hi to All.,
Im doing a Report where in i should show the total amount paid in an A/R Invoice
But my Problem is i dont know what table to get it ..
thx in advance ..Hi!
Try my query here. I'm using this to get my AR Balance base on the date I enter.
The table I use here were OITR and ITR1 (table of internal reconciliation).
SELECT
T0.DocNum,
T0.DocDate,
T0.DocTotal,
isnull(T3.ReconSum,0) as 'Paid to Date',
((T0.[DocTotal]) -isnull(T3.reconsum,0)) Balance
FROM OINV T0
LEFT OUTER JOIN (
SELECT a1.[SrcObjTyp],sum(isnull(a1.[ReconSum],0)) as 'ReconSum',a1.[SrcObjAbs] from OITR a0 INNER JOIN ITR1 a1 ON a0.ReconNum = a1.ReconNum and (a0.ReconDate < [%0]) and a0.iscard='C'
GROUP BY a1.[SrcObjTyp],a1.[SrcObjAbs]) T3 on T0.[ObjType]=T3.[SrcObjTyp] and T0.Docentry=T3.[SrcObjAbs]
where T0.DocDate < [%0] and T0.DocTotal >0
Hope this helps!
Regards, -
How to get the total bytes read by windows media palyer?
Using the wmp activeX control to play an avi format file, and using cvi's activeX tools to generate a wmp control. It can play. I'd like to know which method can get the bytes that read by wmp?
Thanks.user13019948 wrote:
Hi,
I have a tkprof file. How can I get the total execution time.
call count cpu elapsed disk query current rows
total 1406 0.31 4.85 350 16955 0 521TOTAL ELAPSED TIME is 4.85 seconds from line above
Maybe you are looking for
-
Hello i have a printer connected to windows machine that i can connect to over the wireless, is it possible that i can print to that printer? if so how would i go about do so? thanks
-
CS5: "Exit Code: 7" ad nauseam (XP SP3)
Hi, I spent quite some time reading all the available stuff related to the annoying Exit Code 7 installation bug. However, whatever I tried (and I did try a lot) was of no avail. I'll recap what I experienced: First of all, a couple of weeks ago, I g
-
Business Connector: present client certificate to webserver
Hello, we are running a ssl-enabled BC 4.7 core fix 8. We want to establish a connection from the BC to an external webserver (over https, Transport: XML). The external server requires authentication using client certificates (BC has to present it's
-
Hi everyone, After upgrading to Yosemite, Podcast Maker 1.4.1 no longer works. There is no support for this product as the developer site seems to be let go. I was wondering if anyone has any other suggestions on software we can use to generate the r
-
When I open the photo editor in Elements 11 the following message appears. Microsoft Visual C++ Runtime Library: This application has requested to terminate it in an unusual way. And then it shuts down. Has anyone had this problem and have a solut