How to get the traffic split up in VPN 3000 Concentrator?
Hi,
Requirement:
I want to parse & analyze the Cisco VPN 3000 Concentrator logs and provide the report for the happenings using the log.
Issue:
I am able to get the traffic split up for Cisco Pix501 thro' it's logs for the VPN connections. But in Cisco3000VPN Concentartor, i am not able to get the traffic details for any PPTP/IPSec connections. It simply provide the overall traffic log when the seeion is closed. For example below is my traffic log,
<189>14014 07/23/2004 19:16:24.640 SEV=4 AUTH/28 RPT=41 192.168.101.41 User [sarav] Group [Base Group] disconnected: Session Type: PPTP Duration: 0:16:37 Bytes xmt: 216 Bytes rcv: 38023 Reason: User Requested
My Question:
Is there any configuration/solution available to get the live traffic[traffic split up] thro' that VPN connection for Cisco3000VPN Concentartor?
Please help me in getting this issue resolved.
Thanks to all helping me to resolve the issue.
Thanks.
You get the details from the Pix logs not because of VPN functionality but because the Pix is a stateful device the manages and logs each and every session.
The VPN 3000 is not stateful or session aware. The best you could do is provide packet level logging, but this would generate enormous log files that would need to be statistically analyzed to provide useful information.
Your best options are to run their traffic through a Pix firewall for the session logging, use the first hop router inside the network that can provide Netflow export for analysis, or use a probe to monitor the traffic that can discern the indivdual flows. For the last two, ntop can analyze netflow of mirrored sessions to provide protocol analysis by src/dest IP, top protocols used, etc.
-Shannon
Similar Messages
-
How to get the split period wage type amount in payslip?
How to get the split period wage type amount in payslip?
Payroll period for 01.01.09 to 31.01.09.
1. Employee is active from 1.1.09 to 10.01.09
2. Employee is inactive from 11.01.09 to 20.01.09
3. Employee is again active from 21.01.09 to 31.01.09
In Result Table three split periods are created.
From 01.01.09 to 10.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 20.00
From 11.01.09 to 20.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 00.00
From 21.01.09 to 31.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 10.00
My requirement is to print only the last split period in payslip from 21.01.09 to 31.01.09. May you please help me in this regard.
Thanks in advance
Regards,
Rajesh.Hi
Try to read the below:
WPBPC : Distribute Lump Sum Wage Elements to WPBP Periods
Object
Operation
Use
Operation WPBPC distributes the amount of the current wage type to the
active WPBP periods in the payroll period.
Input
The current wage type in the header entry of table OT is used as input
for this operation.
Procedure
Within payroll, wage types are assigned to a fixed WPBP period by
infotype 0014 Recurring Payments/Deductions, for example. However, you
may want to distribute this payment to all active WPBP periods, which is
what would happen if the wage type were entered in basic pay. Therefore,
various specifications exist for parameter S:
o If the specification is 'A', and if several active WPBP periods
exist, the amount is simultaneously reduced on a calendar-day basis.
o If the specification is 'D', the wage type is distributed to all
existing WPBP periods without the amount being reduced.
o If the specification is 'S', and if the validity period starts or
ends during the period, the entry in table WPBP is split using this
date. The wage type is stored in table OT for the corresponding WPBP
period.
This parameter is only allowed if processing was accessed using
function P0014.
In this case, infotype 0014 must be processed before absence
valuation and function PARTT. Otherwise, rejections occur during
payroll processing.
o Specification 'X' is the combination of 'A' and 'S'.
This parameter is only allowed if processing was accessed using
function P0014.
o If the specification is 'W', and if the validity period starts or
ends during the period, the entry in table WPBP is split using this
date (as with option 'S'). Unlike 'S', the wage type is not stored
in table OT.
This parameter is only allowed if processing was accessed using
function P0014.
o If the specification is ' ', the wage type is stored in table OT for
each WPBP period in which the validity interval fits.
This parameter is only allowed if processing was accessed using
functions P0014 or P0015.
If the WPBP split is set for a wage type, the wage type is stored
without changes in table OT. If you specify a different wage type name
in the second parameter, the wage type is stored with this name in table
OT. Before you execute operation WPBPC, you may therefore need to delete
the split using operation ELIMI.
If a country-specific split (C1, C2, or C3 split) is set, the operation
interprets it as an error. The employee in question is rejected by
payroll. All other splits are transferred as they are.
Output
The processed wage type, or the wage type specified in the operation
call, is written to table OT (output table) with the appropriate split
indicator and reduced amount as operation output for each WPBP period.
Parameter specification 'W' is the only exception.
Syntax
OOOOOSVVVV
OOOOO WPBPC Operation name
S
blank distribute to all WPBP periods
S split and distribute WPBP
W split but do not distribute WPBP
A distribute to active WPBP periods
with calendar-day reductions
D distribute to all existing
WPBP periods
X combination of 'S' and 'A'
VVVV Results wage type
blank input wage type = results wage type
wage wage type name of input wage type is replaced
type by wage type name of results wage
name type
Wage type before operation:
Example
M100 02 3000
WPBP split
01 June 01 - June 20 active
02 June 21 - June 30 active
VVVV Results wage type
blank input wage type = results wage type
wage wage type name of input wage type is replaced
type by wage type name of results wage
name type
Wage type before operation:
Example
M100 02 3000
WPBP split
01 June 01 - June 20 active
02 June 21 - June 30 active
Wage type before operation:
WType WPBP Amount
M100 00 3000.-
M200 02 2000.-
Operation: WPBPCA
Wage type after operation:
WType WPBP Amount
M100 01 2000.-
M100 02 1000.-
M200 02 2000.-
Operation: WPBPC
Wage type after operation:
WType WPBP Amount
M100 01 3000.-
M100 02 3000.-
M200 02 2000.-
Regards
Team Member. -
How to get the Page Number in CS3 with VB?
Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com -
How to get the response of a vbscript ran from extended js?
Hi All,
I want to get the result from a vbscript, how to get that in my jsx? This is what I'm doing-
vbscript (this will return me something, i've added just a sample string)
Wscript.Echo "Like this?"
jsx
var a = File("C:\\Users\\Sahil\\AppData\\Roaming\\CreativeWorx\\1.vbs");
var b=a.execute();
Now, variable b returns me true/false; and the output i.e. "Like this?" is alerted! So my question is-
1. How to get the output in a variable?
2. How to avoid the alert
So, I simply wish to get the output from my vbscript and then perform certain functions accordingly, alos, I dont want this to be alerted!
Any help will be highly appreciated!The capitalization is app.doScript and not app.doscript that is if you are trying to get a jsx script to run and access a string from from a vbs script.
When defining the VBscript for multiline scripts the easiest method is to use triple quotes
VBscript = """dim WMI: set WMI = GetObject("winmgmts:\\.\root\cimv2")
dim Nads: set Nads = WMI.ExecQuery("Select * from Win32_NetworkAdapter where physicaladapter=true")
dim nad
for each Nad in Nads
if not isnull(Nad.MACAddress) then Wscript.Echo Nad.description, Nad.MACAddress
next"""
when using the scriptArgs you can either make a loop of them and send the string value of each one something like this
For (n = 0 .........
myArg = "myArg" & n
myStringToPassOver = "Shaddow Fax " & n
app.scriptArgs.SetValue myArg, myStringToPassOver
Next
or probably better to make a long comma or something else separated string and pass it over after the loop
var VBScript = """myArg = ""
For n = 0 To 15
myArg = myArg & "Shaddow Fax " & n & ","
Next
app.scriptArgs.SetValue "myResult", myArg
app.doScript(VBScript, ScriptLanguage.visualBasic);
var myResult = app.scriptArgs.getValue("myResult").replace(/\,$/,"").split(",");
// if neaded use "replace" to remove final "," and "split" to convert into an array
alert(myResult.join("\r")); // alert the array
The above script is a jsx script that runs a vbs
If you want a vbs script to run and access a string from from a jsx script then you would use xxx.DoScript see the sample from the manual below.
Set myInDesign = CreateObject("InDesign.Application")
myJavaScript = "alert(""First argument: "" + arguments[0] + ""\rSecond argument: "" +
arguments[1]);"
myInDesign.DoScript myJavaScript, idScriptLanguage.idJavascript, Array("Hello from
DoScript", "Your message here.")
myVBScript = "msgbox arguments(1), vbOKOnly, ""First argument: "" & arguments(0)"
myInDesign.DoScript myVBScript, idScriptLanguage.idVisualBasic, Array("Hello from
DoScript", "Your message here.")
P.s.Please mark the question as answered, thanks -
How to get the postion of any string
hi
like untitle.txt
how to get the postion of '.'.
AmitHi Amit,
Use SEARCH statement to find out a character or a string in a string.
DATA V_STRING TYPE STRING VALUE 'untitle.txt'.
SEARCH '.' FOR V_STRING.
If search is successful then it will return position of character or string into system field SY-FDPOS.
If your idea is get values of filename and extension by separating period then use simply SPLIT statement.
SPLIT V_STRING AT '.' INTO V_FILE V_EXT .
Thanks,
Vinay
Edited by: Vinaykumar G on Jul 1, 2008 8:52 PM -
I want to list the ip address for all the systems present in the same subnet.
Here I have two doubts,
1. How to get the available subnet list.(we might use two or more ethernet also. how to get that list).
2. How to get the ip address of the conneted systems via that subnets?Icebreaker wrote:
I want to list the ip address for all the systems present in the same subnet.
ask your network administrator. He may have one.
Here I have two doubts,
1. How to get the available subnet list.(we might use two or more ethernet also. how to get that list).ask your network administrator.
2. How to get the ip address of the conneted systems via that subnets?ask your network administrator.
There's no automated way to do that that's failsafe and won't get people extremely angry at you for flooding the network with traffic. -
How to get the values from popup window to mainwindow
HI all,
I want to get the details from popup window.
i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
now i am able to display popup window with values.How to get the values from popup window now.
I can anybody explain me clearly.
Thanks&Regards
kranthiHi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday -
How to get the table of value field? and can we expand the technical limits
Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!how to extend the limit of value numbers? please see the original question.
-
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
How to get the value from a JavaScript and send the same to Java file?
Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie VYes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
} -
How to get the value from databank
Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
raHi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM -
How to get the value from the readonly field?????
Hi All,
I have a readonly field in JSF. in action class i want to get the value of that field.
How to get the readonly field value???
i am getting null if the field is readonly.
i am getting value if the field is not readonly.I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".
-
How to get the value from Advanced table
Hi,
In the Advanced table have 2 LOV fields, I need LOV field value dynamically in the controller to validate the save button, if iam not selected any value in lov save button will not allow to save the data. In the table i am using 'Add another row'. How to get the lov field value in the process form request??? and how to do this requirement
Thanks
Naresh1. You can specify required property on LOV field to "yes". For events where you wish to disable the client side validations, set the property disable client side validation to "true".
2. If above behavior is not what you are looking for, then you need to handle in AM and not CO.
a. Call an AM method from CO.
b. In that AM method, get handle of VO.
c. Iterate the VO Rows and check for your validation rules.
-Prince
http://www.princekapoor82.blogspot.com -
How to get the values from html:select? tag..?
i tried with this, but its not working...
<html:select styleClass="text" name="querydefs" property="shortcut"
onchange="retrieveOptions()" styleId="firstBox" indexed="true">
<html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
</html:select>
<td align="left" class="rowcolor1">
<script language="javascript" type="text/javascript">
function retrieveOptions(){
var sel = document.querydefs.options;
var selectedOption = sel[sel.selectedIndex].value;
document.write(selectedOption);
</script><td align="left" class="rowcolor1">
<script language="javascript" type="text/javascript">
function retrieveOptions(){
var sel = document.querydefs.options;
var selectedOption = sel[sel.selectedIndex].value;
document.write(selectedOption);
</script>This java script is not working at all..its not printing anything in document.write();
This is code..
<td class="rowcolor1" width="20%">
<html:select styleClass="text" name="querydefs" property="shortcut"
onchange="retrieveSecondOptions()" styleId="firstBox"
indexed="true">
<html:options collection="advanced.choices" property="shortcut"
labelProperty="label" />
</html:select>i tried with this also. but no use..i'm not the getting the seleced option...
function retrieveOptions(){
firstBox = document.getElementById('firstBox');
if(firstBox.selectedIndex==0){
return;
selectedOption = firstBox.options[firstBox.selectedIndex].value;
}actually , how to get the values from <html:select> ...?
my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window -
How to get the values from fileds
Dear All,
Good Afternoon,
I want to set the 0 value to the fields at the time of page loading.
For this,
i tried the following ways
pageContext.putParameter("fieldid",0);
and
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
bean1.setValue(pageContext,0)
for getting the values i used
String id=pageContext.getParameter("fieldid");
but i returns null values only while it has 0 value.
how can get the 0 value from that fieldHi,
In order to set values you should use:
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
if(bean1!=null)
bean1.setText("0");
and in order to grab the values from the fields
String id=(String)pageContext.getParameter("fieldid");
Thanks,
Gaurav
Maybe you are looking for
-
Apps won't download onto my phone :(
Each time I try to download or update my apps my phone tells me I am entering the wrong password or username which I know is false because I am using it to log on now and post this. After attempting to enter the password enough times it tells me it c
-
Add a Print button to a Report Page
I'm trying to add a Print button to a report page to render the page in printer-friendly mode and then give the user the option to send to a printer. I started with just trying to add a print button. I added a button to the region and added to the bu
-
How can I stop my Macbook Pro 3,1 (2008 model) from logging off randomly?
Hello, Does anyone know how I can I stop my Macbook Pro from logging out randomly? (version 3,1, 2008 ish). I recently installed Snow Leopard on an upgraded hard drive (did both at the same time)---and now my machine has been randomly logging my out.
-
Debugiing a BackGround Job.
Hi All, I am facing a problem when my program is being run in the Background. As far as i know Background Jobs can be debugged by using transaction SM50. But i am unable to. Could anyone please provide me pointers on this or could guide me on how to
-
Consistent RGB Color Values with Photoshop CS4: An Impossibility??
What I want is very simple: I want the Photoshop files I am working on and the rendered PNGs in my browser to have the same color values. I don't care if my web images look the same color on other screens or anything like that. All I want is for the