How to get the transaction by function out of VIRSA in an easy way

Hi collegues,
I'm looking for a simple solution / query to extract a list out of VIRSA compliance calibrator (5.2). The list should bring up the transaction codes by function.
e.g.
PM01 - ca87
PM01 - ip30
If possible please name the table in VIRSA where this information is stored so I can do a simple query in the SQL-view
thanks a lot
Matthias

Hi Matthias,
in RAR 5.3 you can use the download function of the rule architect. There you get information about tables, functions, actions and permissions.
I don't know if you have this function in VIRSA compliance calibrator 5.2. I started my career with 5.3 
Regards
Dirk

Similar Messages

  • HT1454 HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

    HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup

  • How to get the transaction name from the Webdynpro portal in SRM 7.0

    Hello Experts,
    Would you please let me know the procedure to get the current transaction name from the SRM 7.0 portal.
    Is there any similar procedure like in ITS to get the transaction Name/Template Name in "View Source" of the portal. Our primary requirement is to find the root cause(by debugging) from SAP GUI.
    Your pointers on this will be very much useful & worth the points.
    Thanks & Best Regards,
    Vishnu Reddy Sangati

    Hi!
    Try this thread:
    http://help.sap.com/saphelp_nw04s/helpdata/EN/80/b2dd3a6dac703be10000000a11405a/frameset.htm
    brgs Ziggy

  • How to get the Wiki search functionality working?

    hi,
    Another Wiki question regarding the 7.1u1 Portal wiki functionality: What is necessary to get the wiki search functionality working? Right now when using the wiki search page all it does is return to the search form, no errors but no hits either. I guess some additional administrative work is needed to get search working?
    thanks, tom

    haven't touched anything except for the wiki template jsps to change the design. it is a linux rh4 install. there are no communities on that server (yet), just the wiki portlet in a tab so far. is the wiki search dependent on the portal search server or totally separate (ie self contained wiki search)? any additional services or such that need to be started for it to work?

  • How to get the transactional codes.

    Hi all ,
    I have just started working in the SAP HR and have been referring to the hep.sap.com. I have started off with the Personal Administration and i found that the help.sap.com does not provide the transaction related to the module. Is there anyway we can find the transactions related to each submodule of PA which would help me learn the module better.
    Thanks.

    Hi Freedom,
    It's good to have an idea of all the Transaction codes... but how many can you remember or how many will you access is something thats difficult to ascertain.....
    It is suggested that you start working in SAP with the basic transaction codes and over the period of time you will have an idea of all the transaction codes demanded by the work...
    Do not strain yourself at the very start... The Big thing is yet to come.......
    All the best !!!!
    Kumarpal Jain.

  • How to get the tax spliting functionality using BAPI_ACC_DOCUMENT_POST

    Hi Experts,
    In FB01 tcode when we post the invoice separate tax line item is getting created automatically.
    But we are posting invoice with BAPI_ACC_DOCUMENT_POST here it is not happening.
    Before posting this question here found a thread https://scn.sap.com/docs/DOC-43262.
    Here from the thread info we implemented the BADI and enabled the tax calc flag and implemented the exit.
    Still the separate tax line item is not getting created.
    Can any one please clarify how we can acheive that functionality.
    Thanks in advance.
    kind regards,
    Shiva

    Hello Shivram,
    Your requirement is post FI document with tax line item's automatically with using above BAPI ( FI Posting) ! Suppose you want to post vendor invoice as mentioned below.
    Expenses account.......Dr.....100
    Input tax account.........Dr.......10
      To Vendor account..............Cr....110
    Your upload format should be as mentioned below to post above document in SAP.
    Item No
    Company code
    Pos.date
    Doc.date
    Currency
    Ref
    Header text
    PK
    Account
    Amount
    Tax code
    Assignment
    Text
    00001
    1234
    28.05.2014
    28.05.2014
    USD
    TEST
    TEST
    40
    E1234
    5600
    XA
    TST
    TEST
    00002
    1234
    28.05.2014
    28.05.2014
    USD
    TEST
    TEST
    31
    1001
    6160
    Tax code line item of above '00001 pass in to Calculate tax BAPI which was mentioned above with all required fileds & you can get one retrun table over there > those line items ,you have to pass as additional line item in FI document. ( Through coding). Check with technical consultant.
    Read note : 1873588 - Filling tax information for BAPIs
    626235 - Tax postings with accounting BAPIs
    Above notes only information purpose
    Regards
    Mani Kumar

  • How to get the data from 2 out ports (tables) of BAPI into one table

    I have a BAPI that has two out ports (header and detail). How do I display this data in one table.
    Thanks,
    Subba

    Hi,
    you have the Union operator to merge multiple datasets into one dataset
    regards Tobias

  • BDC-How to get the value of the screen field

    Hi All,
    I am facing a problem while writing the BDC code for the XK02 transaction.
    Recording:
    We have recorded like this :after giving the values in the initial screen(vendor no and purchase group and selecting the purchasing data check box) and enter into the second screen and then click on alternative data icon.There we ll have set of plants we have to check auto ordering (by selecting the plant and click purchasing icon)for the plants which are in the given file.
    Problem:
    Suppose there are five plants(like 1,2,3,4,5) for a particular vendor but we are having only three plants in the file for which auto ordering check has to be done.The problem is that its doing auto ordering check for the first three plants(1,2,3) in the transaction.But  in the file we are having Plants like (1,3,5).How to get the screen field value directly or is there any other way to resolve the problem?

    Dear Raja,
    You cannot get hold of screen values while running through the BDC Operation.
    Only way you can get the value --> populating an Internal Table from the Database Table.
    Regards,
    Abir
    Don't forget to award Points *

  • How to execute the transaction SCI

    Hi All,
    How to execute the transaction SCI
    Thank you,
    Sridhar.

    Hai ,
    there are two ways to use SCI , one is you open you code in se38 -->display mode --> Program >check>code inspector. here your program is executed with a dafault variant provided in SCI.
    Second method is go to SCI , create a inspection  an choose a variant , here system provide you with a wide range of program checks (security/syntax etc)
    For any further help.
    Do reply.
    Regards
    Jase

  • How to get the current transaction variant ?

    dear guru,
    could you please tell me how to get the current transaction variant?
    i tried the following method:
      DATA l_tcvariant TYPE tcvariant.
      CALL 'DY_GET_TX_VARIANT'
         ID 'VARIANT' FIELD l_tcvariant.
    but it failed.
    best regards.
    zj

    Try something like this
    DATA:  VARIANT LIKE SHDTVCIU-TCVARIANT.
      CLEAR VARIANT.
      CALL FUNCTION 'RS_HDSYS_GET_TC_VARIANT'
       IMPORTING
         TCVARIANT                     = VARIANT
    *     FLAG_CLIENT_INDEPENDENT       =
    *     RC                            =
    *   TABLES
    *     T_SCREEN_VARIANTS             =
    *     T_INACTIVE_FUNCTIONS          =

  • How to get the current function name in java

    How to get the current function name in java.
    In c it is done as
    printf("%s",__func__);
    Thanx in advance.

    j0o wrote:
    System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
    "/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
    "/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
    I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

  • How to get the function name/ID  of the current page

    HI,
    I searched the forum and google, but it is not clear on how to get the function name of the current page.
    I have 4 functions in my self service A ,B,C,D (seeded page links ) they all have to go to a page called hhhPG. Based on which function user is clicks I have to show the data in hhhPG.
    so my question is how to get the function name ? I mean I need to know if user click on link A , B, C or D link and came to this page.
    I found below in one forum and also there is getfunctionID in pageContext , but I do not know what to pass to getfunctionid("???") to get value.
    FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
    Or is there a better way of know where user is coming from ? like geturl....
    Please help, I need this ASAP.
    Thank you.

    Use below to find out how the user came into the page
    FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
    boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
    boolean isFunc2 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME2"));
    boolean isFunc3 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME3"));
    boolean isFunc4 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME4"));
    So one of them will be true based on the function the user came in.
    Write your logic based on these flags.
    Regards,
    Peddi.

  • Call function in background task... How to get the result?

    I want to use Call function in background task parameter.
    But I cannot find the result of this function. (No export parameter, no table result, no exception)
    How to get the result of this function module? Correct or not?

    Hi Heinz,
    You can check the result in SM58 transaction.
    For more information pls. refer this thread :
    No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
    Best regards,
    Prashant

  • How to print the list outout with out getting output?

    How to print the list outout with out getting output?
    My requirement is that when i exicute the program the list output has to print with out getting output list display on the screen.
    if possible cana anyone share the code....
    Phani,

    See this Sample Program.
    DATA: PARAMS LIKE PRI_PARAMS,
          DAYS(1)  TYPE N VALUE 2,
          COUNT(3) TYPE N VALUE 1,
          VALID    TYPE C.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING DESTINATION           = 'LT50'
                COPIES                = COUNT
                LIST_NAME             = 'TEST'
                LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
                IMMEDIATELY           = 'X'
                RELEASE               = 'X'
                NEW_LIST_ID           = 'X'
                EXPIRATION            = DAYS
                LINE_SIZE             = 79
                LINE_COUNT            = 23
                LAYOUT                = 'X_PAPER'
                SAP_COVER_PAGE        = 'X'
                COVER_PAGE            = 'X'
                RECEIVER              = 'SAP*'
                DEPARTMENT            = 'System'
                NO_DIALOG             = ' '
      IMPORTING OUT_PARAMETERS        = PARAMS
                VALID                 = VALID.
    IF VALID <> SPACE.
      SUBMIT RSTEST00 TO SAP-SPOOL
        SPOOL PARAMETERS PARAMS
        WITHOUT SPOOL DYNPRO.
    ENDIF.
    Awrd POints If useful
    Bhupal

  • GRC - Role Expert v5.2: how does the Transaction Usage functionality work

    Hi All,
    re: GRC - Role Expert v5.2: how does the Transaction Usage functionality work
    We are implementing GRC suite v5.2, but specifically my question is regarding Role Expert:
    SAP documentation states that it is possible to use Role Expert to do the following: for roles allows you to see if, or how much, a transaction is being used, when it was last used, and who used it.
    My question is how without Audit Log or RBE?
    Let me know if you have ever used this functionality and if it requires the SAP Back-End Audit Log to be turned on or RBE.
    Thanks in advance!

    Hi Gary,
    You dont need a RBE tool activation to get the successful transaction usage log with Role Expert.
    Role Expert functionality allows you to log all the transactions that have been added/deleted to the role that is changed. Also when you create a new role via the Role Expert then automatically the transaction log starts.
    If you go the "History" tab in the Role Expert, then you can find all the last changes made to the role.
    Also you can go to the "Risk Analysis" tab to find the log of Risk Analysis performed with the added tcodes.
    Hope this helps.
    Thanks,
    Kiran Kandepalli.

Maybe you are looking for

  • Apply an existing XML Tag To Current Object JS (JavaScript)

    I'm working on a JavaScript to automatically tag the currently-selected object. I first check to see if the desired tag already exists -- if not I create it:           var myXMLElement = myDocument.xmlElements[0].xmlElements.add(tagType); Then assign

  • MR21+COMPUTE_BCD_OVERFLOW

    Hi We are encountering a dump due to the exception COMPUTE_BCD_OVERFLOW in MR21 during the Price Change.When debugged MR21>>Function Module PRICES_CHANGE>>Function module MR_POSITING_GENERATE>>Sub routin OIA_CALC_LOG_INV>> G_LIVAL = I_SGNBU-NPREI * O

  • JAVA Sax mapping replaces &_amp; with & causing mapping to fail

    Hi all, I have the following mapping scenario: Source XML -> Java Sax Mapping -> Graphical Mapping -> Target structure The source XML is valid and caters for special characters like & which appear as &_amp; in the XML (ignore the underscore _ without

  • Problem while reading multiple files through FTP Adapter

    Hi, We have a requirement to read the excel files placed in an FTP Location and as there is no Adapter to read Excel file we are using FTP Adapter and reading the Header values of the file(name of the file) and we are paasing as input to the Java cod

  • Copying from client through se71 is getting saved as local object only?

    hi. i am copying the form from std to z form through se71.but after doing copy from client,it is getting saved automatically s a local objct $tmp. Also,there is no option enabled to save it to transportable object. in se80,in the object list also tha