How to get the unicode escapes for characters outside a characterset
Hi!
I'm tryiing to edit into a RTF file and have been fairly successful so far. But living outside the U.S i need some characters outside ASCII. Those characters are supposed to be escaped as unicode-escapes, eg \u45. But I can't find a way to get the escapesequense for the unicode-characters that lives outside ASCII.
I'm guessing that this is a very simple thing to do but I have not been lucky with google so far.
So, how do I get the unicode escapes for characters outside a characterset?
Thanks in advance
Roland Carlsson
I'm tryiing to edit into a RTF file and have been
fairly successful so far. But living outside the U.S
i need some characters outside ASCII. Those
characters are supposed to be escaped as
unicode-escapes, eg \u45. But I can't find a way to
get the escapesequense for the unicode-characters
that lives outside ASCII.You are asking about RTF and not java correct?
As a guess....
Unicode is 32 bit (presumably you are not using the newest one.) Thus it requires a 32 bit representation. Thus \u45 actually is the same as \u0045. Thus something like \u1e45 would probably work.
Similar Messages
-
How to get the last error for while loop?
How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.
What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time . -
How to get the depreciation areas for an asset in particular period
Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.ChTry table ANLB, then read ANLC.
Regards. -
How to get the version no. for service po?
Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie -
How to get the owner name for the file in ftp using abap ?
Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa VanarchiHi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh -
How to get the document number for a ware house order.
Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advanceThere are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material. -
How to do the Unicode Check for Business Objects ?
Hi all,
How to do the Unicode Check for Business Objects ?
Note: All business Objects are stored in BOR (Business Objects Repositary)
Thanks in advance
Sri..Hi..
i have used the UCCHECK transaction for some business Objects
For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
and for Business Objects it showing the message like : There is no program corresponding to this selection.
Why system is showing like this ?
Thanks in advance
Sri.. -
How to get the baselinegrid position for a line?
Hi All,
How to get the baselinegrid position for a line in a paragraph?Hi,
2nd line baseline grid for yourPara paragraph is:
yourPara.lines[1].baseline;
last line baseline is:
yourPara.endBaseline;
Jarek -
HT204291 how do get the media icon for mac mirroring when running airplay on itunes?
how do get the media icon for mac mirroring when running airplay
Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US -
How to get the latest update for the phone?
hey does anyone know how to get the latest upgrade for my phone? 3230 nokia
http://www.nokia.co.uk/nokia/0,,58162,00.html
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail. -
How to get the delivery number for the sales order
hi
how to get the delivery number for the sales orderHi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps... -
HT1539 how to get the french track for the digital download
how to get the french track for the digital download from having purchased a DVD at the store
Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H. -
How to get the leading zeros for decimal values?
Hi,
How i wil get the leading zeros for decimal values.For CONVERSION_EXIT_ALPHA_INPUT it is not working.Now iam using overlay condition for getting leading zeros.But iam getting the value like 00013.500.But as per my requirement i want to display this value 0000013.5.
my code is
overlay w_MetLife_detail-rdempsalary with '000000000'
data :rdempsalary type char9
Please help me on this.
Regards,
SujanHi
For more info,
The function of the statement UNPACK is based on the fact, that the BCD display of a decimal place corresponds to the second half-byte of code of a digit in the most character representations. This conversion is commonly called "unpacking".
The statement PACK to pack is obsolete and can be replaced by MOVE.
If destination is specified as untyped field symbol or as untyped formal parameter and is not flat and not character-type during execution of the statement, then an untreatable exception occurs in Unicode programs. In non-Unicode programs, an exception occurs only with deep types, whereas flat types are treated as character-type types.
Example
After the assignments,char1 and char2 contain the values "123.456" and "0000123456".
DATA: pack TYPE p LENGTH 8 DECIMALS 3 VALUE '123.456',
char1 TYPE c LENGTH 10,
char2 TYPE c LENGTH 10.
MOVE pack TO char1.
UNPACK pack TO char2.
Regards -
How to get the Delivery address for PO
I have a problem.
I am working on a SAP Script , which is for PO(Zmedruck_po) , which is a copy of
MEDRUCK.
I am asked to print the delivery adress in a window .
The scenario is like this .
In ME23N , under item details , there is a tab called DELIVERY ADDRESS
this has option to enter the adress details or a delivery number in the address text box .
If the address number is present i have to print that address , else i have to print the address which is entered in the delivery address tab.
If the delivey address number is there i have no problem in printing it ,But if address number is not there ,I need to know how to get the delivery address,
is it the plant address, company code address ... ?
I debuged ,but could not find out.
Can anyone help please .Hi,
try using the below method:
Goto TWLAD table with storage location (EKPO-LGORT) as key to get address number (ADDRNUMBER). then goto ADRC table to get the address of the delivery
Regards
Shiva -
How to get the opening balances for lessthan selected date in cubes.
Hi All,
my task is to get the opening balances for the selected date.
Ex: If I select date say 31-1-2013, I should get the sum of values which are less than the selected date.
in sql:
select sum(balance) from banktrans where banktrans.transdate < 31-1-2013;
BankTable BankTrans
BankId BankId
balance
transdate
BankTable (records):
SCB
BankTrans(records):
a) SCB, 15000, 10-02-2013
b) SCB, 20000, 31-01-2014
c) SCB, 50000, 21-09-2012
If I select date as 31-01-2014, I should get the value as 65000
If I select date as 10-02-2013, I should get the value as 50000
Date will be dynamic selection from years months days hirearchy ( time dimension)
How can i achieve this?
any help is much appreciated.
Thanks,
RakeshDear David,
I've tried the below with static date but i'm not getting the values which are sum of less than the given date.
I've given 1st jan 2013 as static date and I need to get the sum of values which are less than the 1st jan date.
CREATE
MEMBER
CURRENTCUBE.[Measures].[OPENBALANCE]
AS
Sum({Null:[Time].[Years
Quarters Months Weeks Days].[Days].&[2013-01-01T00:00:00]},[Measures].[AmountCur]]),
FORMAT_STRING
= "Standard",
VISIBLE
= 1
can you plz check the above once and guide me.
Thankyou,
Rakesh
Maybe you are looking for
-
We are attempting to add OfficeWriter report rendering extensions for SSRS 2012 in SharePoint (2010) integrated mode through powershell. The documentation for “New-SPRSExtension” is rather sparse and we have not found any clear examples on the intern
-
Im trying to sync my iphone 3 to my computer but it keeps saying usb device not recognised
im trying to sync my iphone 3g to my computer but it keeps saying usb device not recognised.
-
GTS functionality in ECC 6.0
Hi Experts, I've a following requirments in GTS. 1. How to enable GTS functionality in ECC 6.0 and what are all the areas will be affected? 2. How to set SPL (Denied party list) block in the sales order subsequently release approval required? 3.Cou
-
11.6.602.180 msi download
Hi, We have Adobe Flash Player Distribution License Agreement for our site which takes me to an Adobe download to download the msi whenever a new Flash update is available. The link for the msi currently shows Flash Player 11.6.602.171 as available f
-
Recurring Panic ... Daily+
Over the past year my mid-2012 MacBook Pro Retina 15" freezes and reboots at least once daily. It happens while I'm working or while the machine is sitting idle. I currently only have a Thunderbolt display, a Seagate Slim HDD (for Time Machine) and a