How to get the user list under role

Hi Gurus,
in mdm console, if you select a role, you will see the users who are assigned to this role.
how can I get this user list through java api.
Ouser server is MDM7.1SP5
Best regards,
John

Hello John
you cann't get users list.
you can get user roles information since SAP MDM 7.1 SP3:
com.sap.mdm.security.commands GetUserRoles Command
A command to retrieve the array of roles for the specified user
more about api you can read here(What's New in MDM Java and .NET API - part):
http://help.sap.com/saphelp_nwmdm71/helpdata/en/13/041975d8ce4d4287d5205816ea955a/frameset.htm
Regards
Kanstantsin Chernichenka
Edited by: Kanstantsin Chernichenka on Mar 11, 2011 3:10 PM

Similar Messages

How to get the users list that can Add/Remove or modify Vendors in Oracle?

How to get the users list that can Add/Remove or modify Vendors in Oracle?
I need to generate a report like name and responsibility. Thanks

That query gives the Supplier information.
But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
I assume it should be based on the Responsibility.

How to get Active users list in Essbase 6.5.6

Hi Gurus,
How to get Active users list in Essbase 6.5.6 version
I dont find any Esscmd to find active users list....
i used LISTLOGINS command in ESSCMD but its not helping me out....
pls suggest me some approach to find active users list.
Thanks in advance....

Hi ,
Display sessions will give only active users details which are currently connected to the ESSBASE .
if you need this list ? or you need the total list of security active users list ?
if you need the currently connected to the ESSBASE
if you check one server At a time or you can check the application level also
1)server level
display session all;
2)application level
display session on application 'application name ';
go for the run command ---> essmsh-----> login;----->enter user name ----> enter password----->enter host (like server name ) then you need to you above 1 &2 commands
Thanks,
suresh

How to get the user view

Hi,
Can anyone say how to get the user view of a user logged in through admin interface.
I have tried to get the roles of logged in user as below:
<ref>waveset.roles</ref>
it did not work..
Please suggest

who said you cant create view for logged in user, try the following machi
<Action id='0' name='User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getView'/>
<Argument name='authorized' value='true'/>
<Argument name='type' value='User'/>
<Argument name='id' value='$(WF_CASE_OWNER)'/>
<Return from='view' to='userview/>
</Action>
Rgds,
Purush

How to get the user piveliges in Solaris

Dear All,
In solaris how to get the user priveliges,
Example:lsuser -f "user name"
In AIX the above command will show the user priveliges,that user having su access or not like that,I want to know in Solaris,i gone through "ppriv" it not giving the valid information.
Kindly tell me how to get the user priveliges.
Regrads,
Venkatachalam.M

-K- (!),
I followed your suggestions and it works well now. Do you know why I prefer to see the UI in english ? Because the help and everything else (documentation) is in english making very difficult to find in the french UI what is referred to in the english on-line help.
Merci de votre aide !
Christian

How to get the User ID's details in SRM Workflow EBP system

Hi Team
How to get the User ID's details in SRM Workflow EBP system. Example like i have User ID "BTEMPEST" but i want his full name . so please suggst me how to get the full name of user id where it is maintained.
Thanks.
Puneet.

Thank you very much muthu.
For your information FM "RSPLPPM_GET_USERDETAILS" is working fine.
Thanks for quick response.
Thanks
Puneet.

How to get the user entered data?

Hi all,
I have created an HTMLB DynPage component.
In That i have created my input screen with textboxes using response.write method.
i have added one onConfirm event on which the data whould validate.
so onConfirm method im trying to get the data with request.getParameter method which returns null...
how to do...how to get the user entered data to do my validations...can anyone plz advice.
Thanks,
Viswes

Hi
inputfield or textbox component entered directly using response.write(...) are not htmlb , but html.
to create portal input field (ie HTMLB), you should do something like
this in the doProcessBeforeOutput member function
InputField field1 = new InputField("Id1");
field1.setSize(8); // 8 characters
this.getForm().addComponent(field1);
and in doProcessAfterInput member function
InputField field1 =
(InputField) this.getComponentByName("Id1");
you can then manipulate the content of the field.
Hope this help,
Guillaume

How to get the user active stauts in jspdynpro

How to get the user active status in jspdynpro.
I want check weather a user is active or not (Collaboration Launch Pad functionality)
in jspdynpage.
Thank's in advance,
Mr.Chowdary

Hi Eddy,
Here the scenario is to get the data of a field from the user defined table to pass the extracted values as a input to the XL reporter, which will be selected while generating the report.
It would be great if you provide any solution for this problem.
Thanks.

How to get the user created at and modified at properties for a site collection using powershell

Hi guys, I Know how to get the list of users of a site collection by Get-SPUser cmdlet but hte problem is that this cmdlet doesnt give me the user Created at and modifed at properties
can any one tell me how to get these values via powershell????
ps: ignore the 2013 screenshot.. i just want a way to get those values .. if you provide me solution in either 2010 or 2013 , i will crack the other..
plz guys help me ...

Get the User Information list and then get the user from that list
$web = Get-SPWeb "siteUrl"
$userInfoList = $web.SiteUserInfoList
$userItem = $userInfoList.Items[0]; #0 here is just for demonstration. You take the user you want here or loop through all users.
$created = $userItem["Created"]
$modified = $userItem["Modified"]

How to get the user name from Single Sign On Process?

Post Author: sasikumar
CA Forum: Authentication
I am loging in Single Sign On Page. Then it goes to one JSP which lists out some links including InfoView link. While clicking InfoView link, I need to pass user name with the url for authentication. How and where can I get the user name?

Care to be more specific what you mean with single sign-on? There are numerous ways this can be done.
Just how you get the authenticated o/s user from within an Oracle session, depends on just how the actual authentication to Oracle was done in order to create that Oracle session.
E.g. dealing in Oracle with a LDAP server is very different than dealing with a NT Primary/Secondary Domain Controller using o/s authentication, than dealing with a Java-based application server that does it own thing, etc.

How to get the User Details inoformation in portal?

I had defined the user informations in "Portal User Details". But i don't know how to get it and what the user table is?
for example: How to get the email address of user i have defined in portals?
Tank you very much!
Ghia Liu
Genesyslogic.com.tw

You would use the portal API's for this, there is one named wwsec_api.person_info that returns a record with the specified user's information, such as first name, lsat name, email, telephone, etc - a pretty long list. With release 2 of portal the data is no longer stored in the wwsec_person$ table as it was in release 1 so use the API (which actually is how I would normally do it in release 1 as well).
To get more documentation on portal API's go to: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/astart.htm
Hope that this helps you - enjoy the day!
Art

How to get the whole list of Iview Templates

Hi,
when I navigate:
Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
I get a long list of templates including Url Iviews etc
But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
Thanks,
Tomas.

Hi Tomas,
which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
Normally, you will have to have SuperAdminRole to see/change these settings.
Hope it helps
Detlev
PS: Please consider to reward points for helpful answers. Thanks in advance!

How to get the material list displayed in CU50 transaction into ABAP report

How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
But I want only the material list displayed in CU50.

Hi,
Could you please tell us how you found a solution to your problem?
Thanks & regards
Hassan

WebGUI: How to get the users IP-address

Hello.
I have to develop a simple web-application, that will enable users to reset their forgotten passwords or to unlock themselves, if they are locked because of too many failed login-attempts.
As you can imagine, this application must not require a login. For security reasons any action has to be logged.
The username can not be used for logging-purposes, as the application is executed using a default-user defined in transaction SICF. That's why the IP-address of the user's pc has to be written into the log-table.
My problem is, that i do not know how to get it. I have read many articles on help.sap.com, searched in the sap notes, used Google and tried to find usefull functions in our SAP-system, but after two days it still does not work and i do'nt know, what else to try.
At the moment i am able to read the name of the client-pc with my test-coding.
  DATA:    lv_webgui TYPE xfeld.
  STATICS: lv_computer_name TYPE string,
           lv_username TYPE string.
  CLASS: cl_gui_frontend_services DEFINITION LOAD.
  lv_webgui = cl_gui_frontend_services=>www_active.
  IF lv_webgui EQ gc_true.
    " Begin of experimental coding #1
    CALL METHOD cl_gui_frontend_services=>get_computer_name
      CHANGING
        computer_name = lv_computer_name.
    " End of experimental coding #1
    " Begin of experimental coding #2
    CALL FUNCTION 'ITS_ENV_GET_VARIABLE'
      EXPORTING
        variable = 'COMPUTERNAME'
      CHANGING
        value = lv_computer_name.
    " End of experimental coding #2
    MESSAGE s000(38) WITH lv_computer_name.
  ENDIF.
The problem is, that the Internet Explorer 7 (version: 7.0.5730.13CO) shows a warning before the scripts, generated by the ITS, are executed on the client. If the user clicks "abort", the scripts are not executed and the name of the client-pc will not be returned to the server (experimental coding #1 returns the value 'localhost', experimental coding #2 returns an empty string).
That's why the experimental coding is quite useless, because the user is able to avoid it's execution.
In theory i could use experimental coding #2 and stop the execution of the program if an empty string is returned but some users in our company have administrator-privileges and so they can change environment-variables at will. So i am afraid, that this procedure is not an option.
I am quite sure, that there must be a way to read the IP-address directly from the ITS without using the functions in my experimental coding, but i have no clue how this could be done.
Any suggestions would be highly appreciated.
As i do'nt know how to determine the version of our ITS, i have to leave this information out for the moment. If anyone needs this information it would be very kind, if he or she could tell me how to get the required information.
EDIT: As we are using SAP ECC 6.0 and Services are maintained via transaction SICF, it should be ITS 6.40.
Regards
Jörg Neumann
Edited by: Jörg Neumann on Oct 16, 2009 1:27 PM

Hello Wolfgang.
Thanks for your reply.
I can imagine, that the application as described above seems to be very insecure, but the description is not complete - i left some parts out, as they were not relevant for my problem.
1.) The application can only be reached from our intranet.
2.) Unlocking / Resetting password can be done three times per day, which limits the number of attemps for cracking a password to a total of 20 per day.
3.) The owner of the account will receive an email if the acount was changed by the application. So if somebody tries to crack the password, the owner of the account will get a total
20 3 mails per day - which should make him/her at least a litte suspicious.
I know, that the logged data is quite worthless, as computername and username are read using clientside-scripting and there could be a proxy between the client and the server, but this is exaclty, what i have to develop.
I will keep the logging-problem in mind and talk about it in the next meeting, though i am quite sure, that it wo'nt change anything.
Regards Jörg Neumann
Edited by: Jörg Neumann on Oct 19, 2009 4:57 PM

How to get the User input of Dynamic Action confirmation message ?

Hi Guys,
I'm using apex 4.1,
I have added a confirmation message box as page Dynamic Action. How can i get the user input of that confirmation pop up ?
Thanks

Hi,
you don't directly get the user input. But you should still be able to get what you want. Let's assume you have a dynamic action which fires for a "Change" (or any other) event and which has two or more actions
1) Confirm
2) Execute PL/SQL Code
If the user clicks Cancel/No in the confirm dialog, APEX will stop the execution of this dynamic action and not run "Execute PL/SQL Code".
Hope that helps
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

How to get the user list under role

Similar Messages

Maybe you are looking for