How to get the view name by passing the window name from table

Hi All,
would like to knew about the standard table from which we want to "retrieve the VIEW name by passing WINDOW name"
as we have standard tables like WDY_WINDOW, WDY_VIEW,WDY_APPLICATION but our ZComponent details
are not updated in this WDY_WINDOW table.
Is there any other table exists on the above condition
Regards
Jaipal.E

Hello friend,
There are many structure names started with WDY_WB_VC*where the details of the windows and views are stored just search those structures and see where its getting the tables in run time so that you can get the source tables.
I think this will be useful for you.
Thanks,
Sri Hari

Similar Messages

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

HT5422 How to get an better screen-update? The view on the remote Mac is nearly static.

How to get an better screen-update? The view on the remote Mac is nearly static.

You can try reducing the bit depth of the screen image via the slider in the upper-right of the Control window. If that doesn't help, you may just not have a sufficiently fast network connection to correctly handle the data transfer necessary. This is often the case if you're connecting across the Internet. What is your network speed between the administration system and the client?
Regards.

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to get PNP Org Structure to reflect the org structure as of key date?

I created a custom program using the PNP logical database. I defined a custom report category indicating the selection period = employee selection period and allowing org.structure. Im also using the standard SAP PNP_DEFAULT selection view.
Inside my ABAP I initialize the pnpbegda and pnpbegps to reflect 20060930. Upon Execution the key date reflects 09/30/2006. I click on the org.structure button. The org.structure displayed reflects the one as of today rather than as of Sept-30.
During run debug I see that the RP_PNP_ORGSTRUCTURE program, LRPPNU11, calls function 'RH_TYPE_STRUC_HELP' to get the org.structure. The call to this function passes 09/30/2006 for the begda and endda, but it still returns the latest org.structure. I did some playing with this function and found that if I also pass the ACT_SEARCH_WEGID as ORGEH it works.
Any idea on how I can get the LRPPNU11 program to pass the ACT_SEARCH_WEGID or the subsequent called functions to process for ORGEH?

thanks. but maybe I don't describe my problem well.
I use javascript to get some information such as position, sytle of each elements and then pass these to javafx. So the besides the dom tree, I can get more information about elements.
I need to pass them back to javafx.
if node support setUserData, I can associate them to each Node/Element. But webkit don't support this feature.
BTW, If javascript pass a object to javafx. it can only deal with primary types such as string, numeric. But I need pass back a complicated javascript object like:
{name:"parent", children:[{name:"child1"},{name:"child2"}]
I can use (String)JSObject.getMember("name"); and JSObject children=JSObject.getMember("children");
but I can't cast children to Object[] or JSObject[].
so I have to use some tricky to convert Javascript Object to json string and then in javafx convert it back to Object tree.
Edited by: user12956197 on 2013-3-11 上午4:27

How to get an initialised Object according to it's name?

How to get an initialised Object according to it's name?
For example I have 5 HashSets (initialised, with data) hs1 hs2 hs3 hs4 and hs5
Sometimes I want to get one of them according to it's number : "hs"+number
How this can be done (method class.forName is dedicated to antoher thing).
Thanks

I forgot to write that I do not want to use a Map :)
(sure, it' possible via Map, no question).
But in Perl, for example, I could simply write
$ab="col" + "or";
$color="Beidge";
and than I can use address to a variable $color in
such a way : $$ab
... So if a Map is an only way... than it will be a
Map... pity..I do not really know Perl so I can not comment on it; but, are there any compiled languages (at least compiled to the degree of Java) that support this construct? All of the programming languages that I can think of that have this construct are more along the lines of scripting languages.
Just curious.

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to get my macbook to connect to the Apple TV?

How to get my macbook to connect to the Apple TV in a strange apartment? I am housesitting for someone for a few months. They mentioned that i would be able to use their Apple TV to play stuff from my macbook. I am using their basic wifi in the apt, which works fine on my macbook and iphone, but see no Apple TV icon appearing on macbook screen, nor any connection happening. (nor is there anything connection w my iPhone). What gives? How can I establish a connection?

See
http://support.apple.com/kb/ts4215

How to get latest record on top of the result list

Hi Gurus,
How to get latest record on top of the result list when you open the record.
saved data method in BT120H_CPL of OverView page and result list in ICCMP_INBOX.
Regards,
Ravi

Hi
Try sort descending by on fileld "changed at ".
manipulate the sort depends on your requirement
Regards
Logu

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

How in Discoverer 4i viewer (Web) to set the size of the Chart(Graph)?

Hello all,
How in Discoverer 4i viewer (Web) to set the size of the Chart(Graph) by default?
Thanks very much for any help.
Dmitriy Zhabrovets

Hi,
I had a look and don't ask me why but it seems that you can't add extra rectangles in a sub table. But weirdly, it seems possible to add tables.
I mean you can't add a rectangle using
app.activeDocument.textframes.tables.tables.cell.insertionpoint.rectangles.add
//remove any reference, that's conceptual at this time.
The idea I had at the first place but put aside cause to its heaviness is to cheat.
Instead of adding the rectangle, we are going to copy & paste it.
So let's keep all the things you need (rectheight & rectwidth).
But this time, let's use
var oRect = app.activeDocument.rectangles.add({geometricBounds:[0,0,rectheight,rectwidth]});
//You may need to use app.activeDocument.pages[x]... if you have a multi pages doc.
app.select(oRect);
app.cut()
app.select(oInsertionPoints.item(-1));
app.paste();
heavy but it works.
Loic

Can anyone explain to how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this it is driving me nuts

can anyone explain to me how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this i want to get rid of it it is driving me nuts

What do you have checked in Firefox Preferences>General?
Ciao.

How to get system temp dir. path on the fly ,system may be XP or Linux ??

How to get system temp dir. path on the fly ,system may be XP or Linux ??
please suggest solution

The default temporary-file directory can be retrieved
using:
System.getProperty("java.io.tmpdir")
Thanks a lot for u r reply this one works !!!!

HT4792 how to get imovie to show up in the apps on iTunes?

i tried to follow the steps on how to get imovie projects to ipone but the imovie app doesnt show up in the apps on itunes.

So, when you go in to System Preferences > Print & Fax > Set Up fax Modem ..., Internal Modem is NOT showing up in Fax List?
Does Internal Modem.app exist in /Users/{shortUserName}/Library/Printers/?

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

How to get the view name by passing the window name from table

Similar Messages

Maybe you are looking for