How to get to 3 gig? 21=2 22=4 ?*?=3gig

What would be the outcome if i install 2*2gig modules...i realise that the ram limit is 3 gig but to get the sync thing happening and accepting the loss would be preferable to having only 2 gig when 3 is available.
I have a standard macbook 2.16 model mid97.

It would work fine and as you said it would be better with more RAM. Here are some tests that show the results of different RAM configurations.
OWC: MacBook Memory Benchmark Test

Similar Messages

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

STOP "determining gapless playback info": how to get rid of it?

I have itunes 7 with macbookpro and 80 gigs of music on an external hard drive connected through USB to my Airpot Extreme 802.11n base.
I CANNOT USE itunes because it is endlessly "determining gapless playback info" (i'm using the French version who says "détermination des données de lecture sans intervalle")
though I DON'T NEED IT. This is the option that allow albums to play gapless... no such an improvement for a so slow process!
This morning it treated 200 songs in 5 hours... it has been one week i'm letting it work times to times but with this rhythm I still have to wait 350 hours = more than 15 days 24/24... without speaking of the extremely frequent cases when I have to "force to quit" and restard itunes.....
I CAN'T BEAR THAT ANYMORE... IS ALL THAT REALLY NECESSARY?
I cannot imagine this option cannot be unactivated... so please if someone can tell me how to get rid of this "determining gapless playback info" thing... I would be very happy...
Many thanks for your answer!

I'm having the exact same issue. I have a 802.11n Airport Extreme that has my 100 GB music library connected to it via the USB port, and my iTunes (on my MacBook Pro) connects to it via the Airport Disk. Each time I add a batch of new songs to the library, it takes for ever for iTunes to resolve the gapless information. I just added 30 tracks, and it took about 10 to 15 minutes, during which iTunes was completely inaccessible with the spinning beach ball.
My theory is that to determine gapless information, iTunes has to load each track into memory to analyze it. That goes by quick if the libary is direct connected, but over the network that can be a pain (especially if the mp3s are large).
I really wish Apple would make this feature "toggle-able" on a future release of iTunes.

How to get Adobe programs running?

I am running Adobe CC on a Windows 7 machine, 64bit. The machine has registry software (PC Mechanic) and McAfee antivirus. I have 8 gigs of RAM and a dual core CPU. When I run Adobe, I tend to also have a web browser like Opera running in the background. Windows is used exclusively for Adobe software. I have frequent issues with Adobe programs, like Dreamweaver or Photoshop not being able to launch. Or getting errors like "internal signature error". I have called Adobe technical support, who logged onto my computer several times, but their technicians are consistently stumped. Collegues suggested I simply uninstall and reinstall the software. That worked at first, now the programs will no longer launch---even if reinstalled.
Adobe seems unable (or perhaps just unwilling to help). It is suggested that Adobe simply cannot work on the Windows operating system. Rather, the programs are made for MAC computers, not Windows.
Does anyone have suggestions on how to get Adobe CC to run on Windows 7?

Hi Ikhider,
I am running Adobe CC products on a Windows 7 64-bit system too. I also use McAfee anti-virus software as well.
For troubleshooting I would try first shutting down everything running in the background not required by right-clicking on the icons in the system tray and choosing quit or exit.
When launching the Adobe apps try right clicking on the icons and choosing Run As Administrator and see if that makes any difference
The Resolve product launch freezes or problems section of this document might help:
http://helpx.adobe.com/creative-suite/kb/troubleshoot-launch-issues-problems-cs5.html
-Dave

How to get rid off 'long frames'

when I import a movie into FCP and I use the tool 'long frames: mark';
marks many long frames in parts of the movie.
how to get rid off 'long frames'?
thanks
carlos

Long frames are frames whose duration is too long... however sometimes it doesn't matter as you don't see the problem in playback, so if you don't see a jitter there or something, I'd not worry about them.
Dropped frames are frames that are OK, however (usually) your drives can't play them back because they are too slow... they drop a frame to get to the next... this will look worse than long frames do usually.
All that said, if you don't see a problem, you don't have one. Dropping frames is worse though, and I'd suggest that you keep these media files on a fast drive system other than your startup disk. The data rate of the video will determine whether or not you need to use faster disk drives. SATA internals for example will handle 8 bit uncompressed files, but not 10 bit... FW drives range a lot in what they can handle, and the spec should always be MUCH faster than what the data rate actually is. For example, I use G-Raids for 8 bit uncompressed, and 4 gig fibre channel array for HD files. But FW 400 and 800 single drives work great all day long for DV res files, and the fastest of the 800's will handle 8 bit uncompressed if you don't fill them to the brim.
Jerry

How should I partition 10 gig HD for Mail Server???

I plan on making a mail server but I am not sure what partitions to use. I have a 10 gig HD, and I dont want to partition it wrong then have no idea how to go back and redo the partitions without reinstalling. I was thinking something like:
/ = 2gig
swap = 512mb
/opt = 3gig
/export/home = 4 gig
Any idea what steps I should take first to creating a mail server? I still can't find the pop and imap server packages.

For POP3, I suggest qpopper from Eudora. www.eudora.com/qpopper.
It virtually installed itself and seems to work fine right from the start. Now if I could only figure out how to get Sendmail to work with SMTP. All my Internet mail gets refused by Sendmail, incoming and outgoing.

How to get rid of other?

I have about 2 gigs worth of other on my iphone5 when or how can I get rid of all of it? It is wasting space!

if you look to the right under the [More like this] tag you will find several posts about what Other is and how to get rid of at least some of it
because if you want all of it gon you likely have to delete all your contacts and appointments and the likes too

How to get rid of 'other' data

I have masses and masses of 'other' data on my iphone. I have stripped it of all music (500 songs) and it has made no difference. I understand the data is most likely old apps etc not deleted properly, like a ghost trail. I have deleted all unnecessary texts, voicemails, calls, photos, internet history, etc. I have nothing left to delete data-wise. Does anyone know how to get rid of this 'other' data? It was literally taking 6.8gb of my 8gb phone, i have halved that by checking and unchecking 'automatically sync' in itunes, but still can't shift the rest. Really slowing my phone down

Most of the "other data" on my phone is the forced IOS 7 upgrade from Apple.
They push the upgrade(around 850 mb) and also reserve another huge chunk of space on the phone to do a backup and install on the phone (mine is about 2.5 gigs after some manipulation).
If you do not want the upgrade, it just sits there on the phone.
You can not remove it.
Apple will not sign and allow you to restore IOS 6 to your IOS 6 phone.
If you ever need to do a restore of the OS, you will be forced into IOS 7.
When a new upgrade is pushed to your phone, the amount of confiscated storage will accumulate with each subsequent release.
Apple can't be bothered to delete the older/outdated upgrade file being replaced by the new, hence the "other data" just grows over time. I have seen mine get to almost 6 gigs.
You can use Itunes on your computer to "download only/ not install" the newest update, then do a restore of your data and a sync. This appears to remove all the outdated updates from the phone.
You will however, still have about 2 gigs of your storage space still hijacked by Apple to store the most recent forced upgrade.
I am still on IOS 6 and plan on sticking with it simply for personal preference and vision reasons, as that is my prerogative.
It does perplex me why Apple refuses to make IOS 7 optional for users that have always had IOS 6. I can fully understand insisting that new devices run IOS 7, and obviously many IOS 6 users would have jumped anyway.
Apple needs to add an asterisk to word *adoption rate of IOS 7 in their corporate guidance statements.
They knowingly mislead given the current reality that ultimately no one can opt not to adopt it.
Hotel Cupertino, "You can check out, but you may never leave"

Should I get the 30 gig ipod or the 80 gig ipod

Hi Guys,
After two creative labs "lemons" Iv'e decided to get an ipod video but can't decide whether to get the 30 or 80 gig model. I have 8.76 gigs of music ripped to my computer. I want it primarily for music but would also like to put some photos and video on it. I'm leaning for the 80, but my friends recomend the 30 saying that I will never fill 30 gigs. I can easily afford the 30 with an extended warranty plan from either circ. city or best buy. I can also afford the 80 but won't be able to afford an expensive extended warranty plan for it (they average around 69$ for the 80 gig). I also found an 80 gig on amazon for $330 with no tax and free shipping, but I dont think amazon's extended warranty plan is any good. What about apple's manufacturer warranty? is it any good. Do you guys think i should be worried and purchase an ext. warranty or just get the 80 gig and hope for the best? not looking for an answer per say...just your guy's opinions!
-Nick D.

One thing you might want to do is go by an apple
store or retailer. Then you can compare the two
against each other. See which one you would be more
comfortable with.
As far as amount of music and other stuff. Only you
know how big your library can be. My audiobook
collection alone is over 30 gigs. Everyone will have
different size libraries and their use may be
different from you.
Mort
This is not on topic, but you spoke of putting your audiobooks on your iPod. This is exactly why I bought the 80 Gig--but now I'm having problems putting books on it. I have a PC and the books come with an AAC extension--which apparently needs to be converted to a different extension. There is a program to convert on an Apple but I can't find out if there is one to convert files for my PC running Windows XP.
PC Windows XP

How can get 40,000 pix from old computer restored by Carbonite to new computer into PE 11 or 12?

I bought a new, faster, more storage Windows 8 computer.
I had 40,000 pix on old computer tagged with names, event, location, date with PE 11. Also several projects involving hundreds of pix.
Carbonite restored all files (250 gig) from old computer to new, and their tech support says they all are on the new computer.
I bought the new PE 12 and installed it on new computer. It has only found 4,000 pix. I don't at all like PE 12 after enjoying PE2-11 and managing all my pix with it. PE11 was clearer in the pix presentation.
Apparently when imported to the new computer, I lost the tags that went to events, location, and the person tags did not separate family from friends etc. I can't even find my projects.
I was so frustrated with PE12, that I installed PE11, but everytime I try to open the Organizer, it doesn't open.
Help. I am so frustrated. I am pretty sure before I made the transition that I had written all tags to files. When I put PE11 on the new computer, why won't it give me what I had on the old.
This is probably my 10th generation computer change, and I never had such problems before with PE.

I am using 10 and 11 instead of 11 and 12. I tried to go back and edit,
but couldn't figure out how. Sorry, typing errorC.
In a message dated 2/6/2013 7:02:33 P.M. Eastern Standard Time,
[email protected] writes:
Re: How can get 40,000 pix from old computer restored by Carbonite to new
computer into PE 11 or 12?
created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright)
in Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/5050443#5050443)

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

TS3999 I had an icloud account setup in 2009 when I first got my family members each a mac. I let that account expire(we never used it) and I don't know how to get it off of my ical. It is not recognizing any of the information to reset the password?

I had an icloud account in 2009. We set it up as a family plan because my family had just changed from PC to Mac. We never used it and let the plan expire in 2010. My ical will not sync with my new iphone because it is linked to the family plan account that no longer exist. Because I don't remember my password, I tried resetting it. It says the personal information I entered is incorrect, but I know the information is correct...It's my birthday it asks for! Does anyone know how to get that account off of my mac without the account existing?

You were a MobileMe (not iCloud) subscriber in 2009 and this service has been terminated. However the login is an Apple ID and this never expires. What is your operating system? Do you have a MobileMe icon in System Preferences? - if so you should be able to sign out in it, but you may not have an iCloud icon to let you create an iCloud account, though you can do so if your iPhone has iOS 5 or above.
If you are getting login requests or other irritations from your MobileMe account you can go to (user)/Library/Preferences/ByHost and delete all .plist files beginning with com.apple.DotMac or com.apple.idisk, then reboot.
The minimum requirement for iCloud to let you sync your data is 10.7.5 though you can sync through iTunes (except with Mavericks).

I cant update nor download any applications. My password was always invalid. And other username is prompted richardca0521@yahoo.ca which is not my account. How to get rid of this apple id and use my account for download? I have registered this to itunes.

I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.

try and delete the apps and re-add them

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get to 3 gig? 2*1=2 2*2=4 ?*?=3gig

Similar Messages

Maybe you are looking for

How to get to 3 gig? 21=2 22=4 ?*?=3gig