How to get to 32-bit mode in Photoshop on Yosemite

Having a problem. I need Photoshop to run in 32-bit mode in order to access "Lighting Effects". Photoshop users will know what I'm talking about, it's unavailable and greyed out in 64-bit mode. But I don't see the option to select it. My understanding is that it should appear under General: "Run in 32-bit Mode" but it's clearly not there. Is there another check box or something somewhere else I need to check in order to gain access to them? Do I need to do a 32 bit kernel install or something?
This is Adobe's response. It's for CS5, but the information is still valid. It is kind of frustrating though that they haven't brought lighting effects to 64-bit when they've now had CS5, CS6, and multiple versions of CC to get it done.
Still, I don't see the 32-bit check mark and Apple's support documentation says it should be there. I don't know if Firevault interferes with it or not. I am running regular HFS+ (not case sensitive).

Resolved.
Basically the old method doesn't work anymore and the only way to use Lighting Effects is to down sample the image to 8-bit.  It's an unsatisfactory work around, but it's the only alternative I have.

Similar Messages

  • How to i get to quick mask mode in photoshop 7.0

    how to get to quick mask mode in photoshop 7.0

    http://www2.hawaii.edu/~kiray/Eng_308/work/Photoshop7_QuickMask.pdf

  • How to get out of recovery mode in ipod touch 4thgen?

    Hello Apple i am rohith. iam having ipod touch 4th gen. it has ios version 4.1. recently i tried to update it, i have downloaded the update also but while installing an errour has occured and it has gone to recovery mode. can u please give your answer how to get out of recovery mode. it has some imprtant notes belonging to my office

    Without knowing what the error message said:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6?

    How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6?
    I tried to go to Image- Mod but i cant press on Mod button..
    I saw to late that i cant save the image i created with 32bit mode.
    Please help..

    In the image menu, goto the mode sub menu, then choose 8 or 16 bit.

  • How to get out of recovery mode iphone 3gs ios4.3.5

    please can any help on how to get out of recovery mode iphone 3gs ios4.3.5

    Reset, hold both Home and Power buttons until the iPhone restarts.
    If still in Recovery Mode, Restore in iTunes. If the iPhone Errors, write down the Error Code so you can look up the cause and solution.

  • How to get out of demo mode on ipad2

    how to get out of demo mode on ipad2

    Did you erase it and restore it as a new iPad after you bought it? If not, I would do that first and see if that helps.
    ~Lyssa

  • How to get out of recovery mode? (urgent)

    how to get out of recovery mode?

    You iPod encountered an error and has to be restored.
    Maybe a data recovery company can help get the info back..
    Also,
    - Maybe via How to perform iPad recovery for photos, videos
      Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

  • How to get out of recovery mode iphone 4

    how to get out of recovery mode iphone 4

    Plug it into your computer running iTunes and restore it.

  • How to get "Layer Mask Hides Effects" from Photoshop Plug-in

    How to get "Layer Mask Hides Effects" from Photoshop Plug-in.

    I don't think there's enough information here to give an answer.  Is this a Plug-in that you're writing or intend to write?  If so, what type of Plug-in is it?
    If you are writing your own plug-in, the header files included in the Photoshop SDK/API have a bunch of defines for the proper codes to use.
    PITerminology.h has a large amount of keys that can be used to query for information.  PIUGetInfo is probably the function that you want to call to determine what you need to know.
    If you're looking for information about a specific layer, you will want to make a new PIActionDescriptor, call sPSActionDescriptor->Make(*PIActionDescriptor), and then call GetLayerInfo on the layer that you're querying information about.
    You can then call sPSActionDescriptor->Get<datatype> on the layer while passing in the key of the data that you want.

  • HT3989 how do you activate 64 bit mode in logic pro 9 if you purchased it directly from the apps store?

    hey team
    the instructions for the regular activation of 64 bit mode don't seem to work as there is no logic folder in the applicetions, only the icon to launch the program.
    thanks

    Hi
    Select the Logic Pro application within the Applications folder, and use Command I (or File:Get Info).
    Un-chcek the 'Open in 32 bit mode' button
    CCT

  • How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

    The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

    You're welcome

  • How to get to single user mode

    I aquired an old power mac G4 with an old account with 10.3.9 and an old administrator account.  It seems that procedures to remove the account start in Single user mode.  The computer won't start when holding down system - s.  The drive clicks a few times but the display goes to sleep from no video signal.  So How can I get to single user mode when the usual way don't work?

    The hard drive's directory may be dead, or it may have last been booted into Mac OS 9.  IF you are lucky, they did install Mac OS X on it, and that can be determined either through an Option key boot, or through an X key boot on a wired (not wireless) USB Apple compatible keyboard.   X key booting will only work if the X operating system is on the same partition, whereas Option key boot will reveal the Startup Manager, where you select the drive and hit the right pointing arrow for the drive partition that has Mac OS X.   Note this will not work on an original PCI PowerMac G4.   You may also need to replace the PRAM battery, a 1/2 AA 3.6V battery from Radio Shack before any boot sequence will work.  Once it boots into Mac OS X, Single User Mode should work.

  • How to get out of Recovery Mode? Please help!!

    Hello all,
    I have a Nomad Muvo^2 that is stuck in Reocvery Mode. Turns out that when i loaded recovery mode, i didn't really need it cuz it was just my computer that was messed up. Now with a new computer and me being able to access the E dri've for it and see its contents, i can't get out of Recovery Mode. When i turn my player on it reads this message:
    Recovery Mode v.00
    Then it lists the different options like PC Scandisk, etc...
    How can i get out of it's
    Could someone please help me?
    Also could i use the Recovery Tool for it even though my specific type of player is not listed?
    Thank you

    Hi,
    What happens when you select the Clean Up option?
    Refer to this article for more information on the recovery mode options. The recovery tool is not compatible with this player.

  • How to get out of recovery mode says driver cannot be found

    tried 2 update ipod touch on itunes says found new hardware but then cannot find driver so i am stuck in recovery mode and cant figure how to get this undone help

    Try here.  Pay particular attention to the parts that concern he driver.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • How to get out of Safe Mode?

    Hi,
    I started up in safe mode and was able to trouble shoot a peripheral problem. However, I still have a HD icon on my desktop. How do I get out of Safe mode? I did restart a couple of times but the icon continues to appear.
    Thanks!
    S

    If you have rebooted, then you are no longer in safe mode. The HD icon is not an indicator of being in safe mode. If you don't want to see hard drive icons on the Desktop, you can set that preference in Finder -> Finder menu -> Preferences -> General.

Maybe you are looking for

  • How do I change the order of photos in ipad albums in ios 8 ?

    Hi I've just upgraded my ipad mini to IOS 8.1.  I want to create a slideshow in Photo (iPhoto no longer supported) but can't find how to change the order of photos within an album.  Has anyone any suggestions/ideas ? Many thanks

  • Compiles, but won't output anything but "0"

    I'm using Xinox JCreator LE, trying to run the following code: import java.io.*; public class Tester {      //default constructor      public Tester() {           //for storing my elements! yay           Element [] myElements;           System.out.pr

  • Flash Drive not mounting, shows up in sys. prof. and USB Prober

    I have a 4Gig Flash Drive that doesn't mount. It shows up in both SYstem Profiler and USB Prober. Is there any way to "fix" it? I don't need to recover any files - I just want to be able to use it. It used to work, maybe a year ago. Havn't touched it

  • My ichat wont open up? neither will aim?

    I did some system updates and about a week later ichat and aim wont open up? When i click on them they just kinda bounce up and down for a few seconds then disapeer of tried re instaling the applications and updating the system again but nothings wor

  • Trouble with dynamic XML and dataSets

    I am generating dynamic XML files from a datasource. When I try and load into a XMLDataSet I get an 'onLoadError' notification. Now, if I load the same dynamic content as a static XML file it works fine, so I know my XPath and XML structure is correc