How to Get to Level 2?

Hi,
How many points do you have to get in order to reach Level 2? Thanks in advance.
---likeabird---

I had to log out to see this.
https://discussions.apple.com/___sbsstatic___/apple/tutorial/reputation.html

Similar Messages

How to get first level BOM material if I know 4th level material code only?

Dear all,
I have 4th level BOM material only. How to find first level ( finish material) BOM material ?
We can find bottom level material easily through CS11 if we know top level material.
But how to find top material if we don't know ? we know only bottom most material.........
Thanks....

Kishore,
Multiple runs of "CS15" will help you.
Regards,
Prasobh

How to get tem level text of PO???

Dear all,
I want to get the data for Item level text of PO. But not able with the function read_ text as in header level text.
So please tell me how I can get for tem level text of PO.
Thanks in advance.
Sachin Gautam

Hi Sachin,
Follow the steps.
1. Go to the text tab for the item.
2. Choose the Item text.
3. Double click on the text editor.
4. GOTO -> Header.
Get the text name (PO Number+item number eg: 100000000200010 for item number 10).
Language
Text ID and Text Object
Put these values in READ_TEXT.
Hope it helps.....
Lokesh
Pls. reward appropriate points

Using tree - how to get upper levels

I create a heirarchical tree based on a couple of tables via a record group i create on the fly.
I then let the user attach documents to the tree nodes. The problem comes that the node may not exist in the database yet as they can build them as they go. So i need to insert all record on tree into table when they attach a document. I dont want to do this before as i am only interested when they are attaching documents - rather than storing all data that may never be used.
My problem is when they attach the document i want to find all levels in that particular tree to insert them.
i.e. if my tree is as follows
1
-1b
2
-2b
3
-3b
-3c
and the user attaches against 3c I want to insert 3 into the table, then 3b, then the document against 3b, so i need to find out what its uplevel is in this case 3.
How is best way to do this? i have NODE_DEPTH property - to know its not top level and NODE VALUE to know the value, and NODE_LABEL to know the description but how can i find my uplevel when its not stored in a table anywhere.

Cant believe i never found that when searching forms help.
Thanks

How to get mic level loud enough

This is my first attempt at a "complete" iMovie...though have been fooling around with video and stills to practice.
I was thinking about subtitles to make my video make sense, but then wanted to try narration instead. I got out my headset, usb Cyber Acoustics, and spoke into the mic to help set the levels in the Preferences area. The sound bars showed up, but really couldn't get them high enough. And yep, when I recorded some narration lines, the levels were not nearly high enough. I upped the level by raising the levels bar within the narration clip, and that helped some, but not enough. What options do I have? This is the kind of G4 that does not have a regular mic plug, has to be usb. I got this machine recently, so am rather new to the mac as well.
Also, any way to monitor the video's soundtrack while I record narration. I was planning on blending with the cadence of the music and surf, but now can't do that. I tried both same headset, and then separate headset (via ext speakers)...Output seemed to be set correctly for that, but no sound.
Powermac G4 Mac OS X (10.4.10) 1.5 gB sdram

Welcome to iMovie Discussions.
With any USB input device, you have to go to System Preferences (..are those the Preferences you meant?..) and then 'Sound', and click on the 'Input' tab, make sure that you've chosen the correct device (..e.g; the USB device..) and then drag the horizontal slider till it shows plenty of audio coming in.
(..You HAD clicked on the 'Input' tab - for the mic - not the 'Output' tab - for the headphones - hadn't you? ..Just checking..)
I don't know the Cyber Acoustics headset, but all other USB input devices I've tried DO deliver a good strong audio input. (E.g; the teeny plug-in USB plug for the similar Philips headset can be used with any other mic and 'phones for a really good volume level.)
"..What options do I have?.." ..You may be able to export the narration to GarageBand, and increase the levels there (..I hardly use GarageBand, so I'm not too familiar with it..) and you can certainly do the same - though it's a bit more complex - by exporting it and then using the free 'Audacity' (click on that blue link) or similar software to increase its volume.
"..any way to monitor the video's soundtrack while I record narration.." ..Yes; export the edited movie back to tape, and watch the tape playing in the camcorder while speaking your narration.
OR, better still, put a blank tape in the camcorder, watch your edited movie in iMovie and simultaneously speak your narration into the camcorder, with the camcorder's built-in mic. That guarantees the correct audio level.
Then import that new recording into iMovie, 'Extract' the audio into one of the audio tracks, delete all the video which you just imported, and drag the audio back to the start of your movie: result ..perfect narration, timed exactly to fit the movie!

How to get object level security in Universe?

Hi,
I need to get the object level security for an Universe. I'm able to get the list of objects and its security access level (Public / Controlled / Restricted / Confidential / Private / ) from the (.Unv) file using the Designer SDK.
But I need to get the list of users who has the object level security in the universe. In the CMC, by clicking the Universe and click on the Object Level Security tab, we can see the list of users there.
I need to get the same using BOE SDK.
I have used the following query to get the universe from the repository,
"select * from ci_appobjects where si_kind='universe' "
But I'm not able to get the list of users having obj. level security for that universe.
Kindly help me to proceed.
Thanks.

The access security level is encapsulated in the SI_KIND='Overload' object.
Look for those types of objects, and the doc for the Overload class.
An Overload references the Universe to which it's associated, and User/UserGroup objects are associated with the Overload via SecurityInfo.
Sincerely,
Ted Ueda

How to get Status Level upgraded ...

...to Level 2 since I now have 195 Total Posts Online.
Thanks.
~Raymon

only solved/helpful ratings given to your actual postings will count towards your points total
5 points for 'helpful' - yellow star
10 points for 'solved' - green star
most people who post a question fail to award points to the people who try to help them, but they're not being mean, they may not even know the points system exists
my advice is ignore points/levels, there's no real benefit to having more, and the system is rigged in favour of us old timers anyway...
in the past, points were awarded simply for posting, then when the system changed it was like the 'posting points' were doubled and added to 'real points' to create the new points count, the people on the system with the largest numbers of points got most of them this way
so in my case i've got over 5000, but i think about 3000 of those were from the doubling-up of points for posting messages, which is just silly
personally i think it is much nicer to get a 'thank you'!

How to get game levels back after updating iphone

i just recently updated my iphone 4 to newest update however the games have eitha gone bak to level one or another level thats nowhere near what level i was on... is there anyway i can get my games back to my original level?

By restoring you erased the iPhone5.
Use iTunes to restore your iOS device to factory settings

Please can any one suggest how to get entry level job in sap sd...

sugess
<<Moderator Message: Learn to ask more meaningful questions first>>
Also, Read this: The SCN Rules of Engagement
Message was edited by: kishan P

What is your DB version?
I too could not get this to work in 8i. I had to use “hardcoded” date:
set until time='07/20/2011:09:59:59' ;Iordan Iotzov
http://iiotzov.wordpress.com/

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

How do I get Parent Level entreis on ABAP to XML?

I have a program that is doing ABAP to XML.
It is creating the file but some of the entries are not formatted correctly and i do not know how to correct this.
It relates to 1) the Data line is not formatted the way I want; and 2) I do not know how to get rid of the "item" level is is creating (although I do not have "item" anywhere in my code).
I have listed below: 1) the way the file should look; 2) how my output looks (with notes on lines not the way I want them) and 3) my source code.
The file should look like this format:
<?xml version="1.0" encoding="UTF-8" ?>
- <Data xmlns="ServiceNet">
<BatchDateTime>2009-10-23T17:37:16</BatchDateTime>
- <Sale>
<StreamNumber>11000000</StreamNumber>
<UpdateActionCode>001</UpdateActionCode>
<CancelRequestDate />
<ClientContractNumber>2000781011</ClientContractNumber>
<ContractPurchaseDate>20090911</ContractPurchaseDate>
<ContractQuantity>1</ContractQuantity>
<ClientDealerID />
<ClientSkuNumber>9781400599950</ClientSkuNumber>
- <Products>
- <Product>
<EquipmentPurchaseDate>20090911</EquipmentPurchaseDate>
<ClientProductCode>9781400599998</ClientProductCode>
<ClientBrandCode>Barnes&Noble</ClientBrandCode>
<ModelNo>9781400599998</ModelNo>
<SerialNo>9102009123456789</SerialNo>
<EquipmentQuantity>1</EquipmentQuantity>
<PartsWarrantyExpiration>12</PartsWarrantyExpiration>
<LaborWarrantyExpiration>12</LaborWarrantyExpiration>
</Product>
</Products>
</Sale>
</Data>
Here is my code:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code. Don't try to circumvent this by posting multiple posts in one thread.
Thanks.
Scott
Edited by: Rob Burbank on Nov 12, 2009 10:48 AM

iTunes prefs -> Playback.
Tick Enable Soundcheck.
On the iPod, settings -> Soundcheck - On.
Sync the iPod.

How to get automatically batch no in delivery level?

Dear Expert
How to get automatically batch no in delivery level?
Thanks for Advance

hi,
answering to your question.
please go IN SPRO - LOGISTICS GENERAL - BATCH MANAGEMENT - BATCH DETERMINATION AND BATCH CHECK & you need to CONFIGURE what ever comes in the name of SD.
hope this clears your issue
balajia

Bom explosion how to get the least level every stufe = 1

material number : 2t67363633
     following is the bom of that materials
   the below ouput is i got it from cs12
.1 010 6631030681
..2 010 INL025000650
..2 020 IN6631030681
.1 020 6650002622
..2 010 950002621GV
.1 030 6682500491
.1 040 712758079
but in cs13 the following output i got only the following for the same materials
.1 010 6631030681
..2 010 INL025000650 -
i got this
..2 020 IN6631030681 -
i got this
.1 020 6650002622
..2 010 950002621GV -
i got this
.1 030 6682500491    -
i got this
.1 040 712758079     -
i got this
requirement is take the least items in every level1 items
supouse if the level1 item doesnt have any subitems ,we ll take this one also
following is the detiails for the senario,using this to restrict and how to get the cs13 above output
level fld2    fld3    fld4 fld5   fld6 fld7 componentname
.1 0000001 00000097 001 00002 0001 010 6631030681 -
..2 0000001 00000093 002 00002 0001 010 inl025000650
..2 0000002 00000093 002 00004 0002 020 in6631030681-1560
.1 0000002 00000097 001 00004 0002 020 6650002622
..2 0000001 00000095 002 00002 0001 010 950002621gv
.1 0000003 00000097 001 00006 0003 030 6682500491
<b> .1 0000004 00000097 001 00008 0004 040 712758079</b>
i here attached my code for ur review
i got the output without the last leve i bold it. is there any logic to solve the problem
TABLES : MAST.
DATA: BEGIN OF ISTPO OCCURS 1000.
        INCLUDE STRUCTURE STPOX.
      DATA: END OF ISTPO.
DATA: W_TOPMAT LIKE CSTMAT.
SELECT-OPTIONS : P_MATNR FOR MAST-MATNR.
PARAMETERS     : P_WERKS TYPE MAST-WERKS.
DATA : BEGIN OF ITAB OCCURS 0,
           MATNR LIKE MAST-MATNR,
           WERKS LIKE MAST-WERKS,
           END OF ITAB.
DATA: IT_STB LIKE ISTPO OCCURS 0 WITH HEADER LINE.
data : istpofinal like istpo occurs 0 with header line.
data : istpotemp like istpo occurs 0 with header line.
START-OF-SELECTION.
CLEAR ISTPO. REFRESH ISTPO.
SELECT MATNR WERKS FROM MAST INTO TABLE ITAB
                   WHERE MATNR IN P_MATNR AND WERKS = P_WERKS.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
     MMAPS                 = ' '
     MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ITAB-MATNR
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPO
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
IF SY-SUBRC = 0.
WRITE:/ 'MaterialNumber' ,21 'Description'.
SKIP 1.
endif.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
         W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
data : ttabix like sy-tabix,
        tstufe like stpox-stufe.
data : len type i.
istpotemp[] = istpo[].
describe table istpotemp lines len.
LOOP AT ISTPO .
WRITE :/ ISTPO-STPOZ,
           ISTPO-STLKN,
           ISTPO-POSNR,
           ISTPO-IDNRK,
           ISTPO-OJTXP,
           ISTPO-MENGE,
           ISTPO-MEINS.
if sy-tabix = len.
move-corresponding istpo to istpofinal.
append istpofinal.
exit.
endif.
ttabix = sy-tabix - 1 .
if tstufe ge istpo-stufe.
read table istpotemp index ttabix.
move-corresponding istpotemp to istpofinal.
append istpofinal.
endif.
tstufe = istpo-stufe.
ENDLOOP.
*endif.
endloop.
skip 3.
loop at istpofinal.
     WRITE :/ ISTPOFINAL-STPOZ,
            ISTPOFINAL-STLKN,
            ISTPOFINAL-POSNR,
            ISTPOFINAL-IDNRK,
            ISTPOFINAL-OJTXP,
            ISTPOFINAL-MENGE,
            ISTPOFINAL-MEINS.
endloop.

Hi Shiba,
We got the required list,
But while using select-option to view multiple values the list of datas in the ISTPOFINAL gets displayed like the given below.
example
Material1
.........Component 1
.........Component 2
Material 2
.........Component 1......... From Material 1
.........Component 2......... From Material 1
.........Component 3
.........Component 4
Material 3
.........Component 1......... From Material 1
.........Component 2......... From Material 1
.........Component 3......... From Material 2
.........Component 4......... From Material 2
.........Component 5
.........Component 6
Like this it goes on for the entire list at the tie of displaying the ISTPOFINAL.
We tried evn by deleting the adjacent duplicate values still it gets displayed.
is there any problm with the loop or is it the problm with the ending of the loop.
Pls suggest us.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
      MMAPS                 = ' '
      MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ITAB-MATNR
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPO
      MATCAT                = MATCAT
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
         W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
data : ttabix like sy-tabix,
        tstufe like stpox-stufe.
data : len type i.
istpotemp[] = istpo[].
describe table istpotemp lines len.
loop at istpo.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      MEHRS                 = 'X'
      MMAPS                 = ' '
      MDMPS                 = ' '
     BREMS                  = 'X'
      DATUV                 = SY-DATUM
      MTNRV                 = ISTPO-IDNRK
      WERKS                 = P_WERKS
      EMENG                 = '1'
      STKKZ                 = ' '
      FBSTP                 = ' '
      FTREL                 = ' '
    IMPORTING
      TOPMAT                = W_TOPMAT
    TABLES
      STB                   = ISTPOTEMP
     MATCAT                = MATCAT
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      OTHERS                = 8.
if sy-subrc ne 0.
move-corresponding istpo to istpofinal.
append istpofinal.
clear: istpo, istpofinal.
else.
continue.
clear: istpo, istpofinal.
endif.
*break-point.
delete adjacent duplicates from istpofinal.
endloop.
loop at istpofinal.
     WRITE :/ ISTPOFINAL-STPOZ,
            ISTPOFINAL-STLKN,
            ISTPOFINAL-POSNR,
            ISTPOFINAL-IDNRK,
            ISTPOFINAL-OJTXP,
            ISTPOFINAL-MENGE,
            ISTPOFINAL-MEINS.
clear: istpofinal.
endloop.
endloop.

How can I get low level access to netstream using OSMF?

Hi
I'm trying to gain access to the low level netstream underneath the hood of OSMF so that I can access its netstream.info property for reading metrics.
I find that I am able to do this for MP4 videos but not for F4M dynamic streaming videos.
For MP4, I was successfully able to create a VideoElement that used a CustomNetLoader class which overrided the createNetStream method to return a netstream object.
However, for F4M, I have to use either the MediaFactory.createMediaElement(element) method or the F4MElement. The F4MElement does not allow a CustomNetLoader to be used and it seems to only accept a F4MLoader class.
Any advice on how I can access either the netstream object or the metrics of F4M videos?
Thanks

ok, I finally got access to the direct netstream object - someone from Akamai gave me the answer.
Seeing how I wasn't able to find this answer anywhere on Google, I'm going to post the solution here as there's no way I would have known this solution without someone who knew how to get direct access to the netsteam object in OSMF.
There's a hidden class that won't show up in the code hint called org.osmf.net.NetStreamLoadTrait that you have to import.
1) First, your media player playing controlling your MediaElement has to listen for a LoadEvent.LOAD_STATE_CHANGE event after you load the MediaElement into the media player
mediaPlayer.addEventListener(LoadEvent.LOAD_STATE_CHANGE, onLoadStateChange);
2) Upon LoadEvent.LOAD_STATE_CHANGE, check for a org.osmf.traits.LoadState.READY - you can only access the NetStream object when it is LoadState.READY or the netstream object will return as null.
private function onLoadStateChange(e:LoadEvent)
                              if(e.loadState == LoadState.READY)
3) Once the LoadState.READY is true, you can create a datatype of NetStreamLoadTrait and type cast it from a Load trait:
private function onLoadStateChange(e:LoadEvent)
if(e.loadState == LoadState.READY)
     var nsLoadTrait:NetStreamLoadTrait = mediaPlayer.media.getTrait(MediaTraitType.LOAD) as NetStreamLoadTrait;
4) Once you successfully type cast the Media Load Trait from your media into NetStreamLoadTrait, you can access the property netstream from the NetStreamLoadTrait object.
private function onLoadStateChange(e:LoadEvent)
if(e.loadState == LoadState.READY)
     var nsLoadTrait:NetStreamLoadTrait = mediaPlayer.media.getTrait(MediaTraitType.LOAD) as NetStreamLoadTrait;
     var ns:NetStream = nsLoadTrait.netStream;
Hope this helps someone out there.

How to Get to Level 2?

Similar Messages

Maybe you are looking for