"how to get to the bottom of a page fast on the iPad Air"

how to get to the bottom of a page fast on the iPad Air"

thank you! I am admiring my three dots and considering which cat's picture I should upload as my avatar.
yes, the scrolling down in sections I have managed. I thought you were saying one set of double taps would go straight to the bottom.
here's another question for you: on my iMac by holding the command key down I can make a link open in a new tab. Do you know if there is a way to do that on the iPad?

Similar Messages

HT201301 viewing and recording internet videos ???? How do I use the ipad air as a PVR ????

How do I use the ipad air as a PVR to record and later view internet videos.
I want to watch the canadian version at cbc.ca/sochi which is streamed in real time at least 10 hours later during daylight hours here not in the 10 hour shift in Russian time. The events tend to occur in the middle of our night and I want to watch in our daylight hours.
Yes the events are rebroadcast later but I expect they will be general and not specifically covering Canadian competitor. Commentary etc will be different.

You don't.

How to know if the ipad air is real or fake

How to spot out if the ipad air is real or fake that I bought?why are the games such as asphalt 8 and subway surfer are slow?

Did you close all apps in the multi-task window before you start the game?
Did you try reset the iPad?

How much output of the ipad air charger

why my ipad air charger ohly have 1A ouput?

1A seems a little low.
My iPad 4 charger: Output: 5.2V (2.4A)
My iPad Mini charger (1st generation): Output: 5V (1A)

What is the best stylus pen for the iPad Air?

Wondering which stylus pen to get for the iPad Air that's best for writing, and that you don't have to press too hard to use. Simply a stylus that works well with the "iPad Air" specifically. So far since I have been reading I haven't heard much good reviews about a stylus pen working well with the iPad Air

In my experience, the same stylii work well with the Air that worked with my iPad 3 and my iPad 2. You shouldn't have to press hard with any stylus. Stylii are a matter of personal preference. You will get as many suggestions as you get people replying to this thread.
I currently use three. An Adonit Jot Pro, a Pencil by Fifty-Three (mostly for drawing) and an Adonit Jot Script Evernote Edition. I have a collection of cheap Griffin stylii that as well. They work fine and are good to be able to lend to others.
Best of luck.

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How to get all the values from a HashMap? thanks

hi
can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

I have a 32 gb ipad air but need to get the songs stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb so far too much to put on my ipad air. How do I get them off my old iMac which

I have a 32 gb ipad air but need to get the songs I have stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb. far too much to put on my ipad air. How do I get them off my old iMac which has no internet connection ? And where do I put them. Any help would be appreciated

No I don't have another computer. I was thinking initially I would put them on my ipad but since I don't have enough gb maybe I can store them in some cloud thing? Sorry am a bit of a Luddite when it comes to all this. I just need to have them stored someplace and accessible to play when I need to. Thanks for your help.

How to get(copy) the contents i.e the cell of an excel sheet to other excel

How to get(copy) the contents i.e the cells of an excel sheet to another excel sheet.
I can read the contents i.e the text in the cells and able to display it in the Java console
i want these contents to be copied to another excel sheet with the cells data.
I am using Java Swing for the UI, POI framework for the excel work.
Please anyone suggest some code to this requirement.

[spreadsheets with poi|http://poi.apache.org/spreadsheet/converting.html] Hi
on the poi apache site there's a number of good examples...
I started with poi only a week ago, but just from reading these examples
(especially SS Usermodel code) i managed all i needed to know (so far).
kind regards
BB
Edited by: BugBunny on Feb 22, 2010 4:36 AM

How to get on the apple seeding program?

How to get in the apple seeding program. I really want to to test apples new iOS software.

Yes, but if you're not already a developer you shouldn't be testing beta software.
You shouldn't test beta versions of iOS on your day-to-day phone. You should have dedicated phone just for testing and it needs to be registered with Apple.
Being part of the developer program and having access to iOS betas is not intended for just curious, non-developer people. It is for real developers who need to test their own apps on future versions of the OS and provide detailed feedback to Apple for bug fixing.
If you're just curious about new OSs, don't bother.

"how to get to the bottom of a page fast on the iPad Air"

Similar Messages

Maybe you are looking for