How to get to the PSA maintance in BI 7.0

Hi All,
Can any one please let me know how to get in the PAS to maintain the request.
Regards,
Ashutosh D

Hai Asuthosh.
Goto RSA1 --Infoprovider > find the datasource> Right Click and manage,it will take to you to the PSA Maintaineance Tab.
asign points if helpfull
regards
Kp

Similar Messages

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How to get all the values from a HashMap? thanks

hi
can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

How to get(copy) the contents i.e the cell of an excel sheet to other excel

How to get(copy) the contents i.e the cells of an excel sheet to another excel sheet.
I can read the contents i.e the text in the cells and able to display it in the Java console
i want these contents to be copied to another excel sheet with the cells data.
I am using Java Swing for the UI, POI framework for the excel work.
Please anyone suggest some code to this requirement.

[spreadsheets with poi|http://poi.apache.org/spreadsheet/converting.html] Hi
on the poi apache site there's a number of good examples...
I started with poi only a week ago, but just from reading these examples
(especially SS Usermodel code) i managed all i needed to know (so far).
kind regards
BB
Edited by: BugBunny on Feb 22, 2010 4:36 AM

How to delete all the PSA

Deafr Experts,
How can we see the PSA mainintaince screen .Actually I want ot delete all the PSA which I created privisoyly for one cube of SD .can u please suggest me the steps .thanks in advance .

Hi ,
For each PSA there is a table assigned , you can directly deleted the PSA table to delete all the data for a particular PSA.
For more clarity , please look into this document (page 9)::
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404544e7-83c9-2e10-7b80-a24d5099ce3f?QuickLink=index&overridelayout=true&52316996712496
Regards,
Arpit

How to get on the apple seeding program?

How to get in the apple seeding program. I really want to to test apples new iOS software.

Yes, but if you're not already a developer you shouldn't be testing beta software.
You shouldn't test beta versions of iOS on your day-to-day phone. You should have dedicated phone just for testing and it needs to be registered with Apple.
Being part of the developer program and having access to iOS betas is not intended for just curious, non-developer people. It is for real developers who need to test their own apps on future versions of the OS and provide detailed feedback to Apple for bug fixing.
If you're just curious about new OSs, don't bother.

I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form". I can't figure out how to get to the page that you choose which form you want

I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form". I can't figure out how to get to the page that you choose which form you want. How would I do that?

Pct,
In the Numbers spreadsheets window where all your documents are shown as icons, tap the Plus Sign.
Choose Create Spreadsheet
Select the template you want to use
Jerry

How to get past the grey start up screen after mavericks update

I have recently installed a free update of Mavericks on the App store. However after installing this, the Macbook Pro that i've installed on will not boot beyond the Grey start up screen. I was running Snow Leopard on a machine with intel core 2 duo processors 4 Gb of RAM and over 100Gb of free memory.
I have attempted a safe boot (holding down shift while while holding the power button down), and Reseting the NVRAM by pressing 'command', 'option', 'P' and 'R' at the same time.
I do not have an installation disk or a time machine back up.
Does anyone know how to get passed the Grey start up Screen?
Any Suggestions would be mucho appreciated.

I have recently installed a free update of Mavericks on the App store. However after installing this, the Macbook Pro that i've installed on will not boot beyond the Grey start up screen. I was running Snow Leopard on a machine with intel core 2 duo processors 4 Gb of RAM and over 100Gb of free memory.
I have attempted a safe boot (holding down shift while while holding the power button down), and Reseting the NVRAM by pressing 'command', 'option', 'P' and 'R' at the same time.
I do not have an installation disk or a time machine back up.
Does anyone know how to get passed the Grey start up Screen?
Any Suggestions would be mucho appreciated.

Satellite 2540xcdt: How to get into the BIOS

Hi there,
I've just bought one of the above computers and would like to know how to get into the bios before it boots up to the OS,
anybody out there have any ideas?
Many thanks
F

Hi
Pres ESC button just after starting the unit and keep it down for a short time.
Bye

My 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd .

my 2y child pressed the iphone screen many times accidently and password screen is gone. How to get back the pwd screen ? I have the valid pwd.

Reconnect it to the computer to which you last synced it.
For more information see http://support.apple.com/kb/ht1212

How to get to the PSA maintance in BI 7.0

Similar Messages

Maybe you are looking for