How to get track changes to put vertical marks in margin.

I have a massive collection of documents to amend, but our regulator will only accept amended documents where the changes are marked with a vertical bar in the margin.
I have managed this in Pages once in the past by importing a word document with this feature turned on, but have never managed it again, or managed it within a document created in pages.
Is it possible?
If anyone can spare the pain and misery of converting all these table filled documents into word, I would be most grateful!

Hello fruhulda
I disagree with the statement :
Pages doesn't have a feature which create vertical marks in the margin, but you can always use the Line shape, rotate it to be vertical and put in in the margin. It will not print when in the document margin.
The main text layer can't expand in margins but floating items may print.
I use this feature when I want to number lines of text.
In most iWork templates, the margins are wider that the non-printable physical printers requirements.
I'm sure of what I wrote for iWork '09.
I didn't checked with iWork '08.
Yvan KOENIG (VALLAURIS, France) lundi 7 février 2011 18:54:43

Similar Messages

  • How to get the changes during ABENDED replicat process

    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AM

    NaveenK wrote:
    Hi,
    I am working on Oracle GG bi-directional DML replication. I m stuck in one place.
    My target replicat process was ABENDED due to Error :- ORA-01403: no data found. I restarted my replicat process again by runing the below command
    GGSCI (db1) 30> alter replicat rep2 begin now
    GGSCI (db1) 30> start replicat rep2
    After restart the replicat process I can't see the changes on target server which I had applyed on source server during target replicat was ABENED.
    My doubt is.
    1. Is my command is correct for start the ABENDEND replicat process?
    2.How to get the changes on target server which applyed on source during ABNDED of targer replication?
    3.How to avoid the ABENDED replicat process on production server?
    4.how to track the ABENDED process in production server?
    Please HELP:(
    Edited by: NaveenK on Aug 29, 2012 3:32 AMHi Naveen. SQL Error 1403 means row not found. Your data is out of sync and you should fix this.
    By doing begin now when this happens, you are skipping all the transactions that were "in-line" since the process ABENDED.
    You have more than one way to deal with these things, first of all you should synchronize your data! This should get rid of the 1403 errors.
    Then you can write rules using REPERROR to tell the replicat how to behave in case of errors should come up.
    Using logdump, you can read the exact row which failed and find out the next RBA to skip that specific one if required. You should also configure a DISCARDFILE to get details about errors when they happen.
    Greetings,
    N K

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • Confition type FRC1- how to get the change log,

    Hi,
    When  the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
    how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

    Check in
    m/06
    go to utilities
    change log
    If not found  consult BASIS consultant

  • HT1212 ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

    ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • TS1702 I bought Say Hi Translate. How can I change it to translate English to French now that it is installed? It comes up Spanish and French ! Can you tell me how to get this changed?

    I bought Say Hi Translate app.  How can I change it to translate English to French?  It's already installed and it now has Spanish/French after I tried several ways to change it, but originally it came up English to Spanish. Can you tell me how to get this changed?  Thanks! JKA

    Contact the support or FAQ/user guide for the app on the app creators website if available.

  • How to get track names??

    how do i get cd info-track names artists etc. when i put in cd and connected to internet itunes will still not connect to gracenote to get info-i have other friends with same problem who just type in all the info. having spent a small fortune on i phone i want it to get all the info and artwork rather than my music all being a mess. why is i tunes so hard??
    everything is ticked so no reason why it shouldn't connect to gracenote. my old i river software on this same laptop has no problems connecting to gracenote.
    could it be anything to do with my norton security and if it is what do i change on the settings on that??  this is driving me nuts!!!!

    yes thats all ticked correctly. even when click on get track names it does nothing-its not even thinking about anything. i've had various friends look at it and can not come up with a solution. its like gracenote is not linked to my itunes at all.

  • How to get or change the ip address of MAXDB database node ?

    Good morning,
    I am having a problem configuring a sap server that is running on a SUSE enterprise linux VMWARE image, the image itself is delivered paused with the server running already but when i shut it down to change hardware configuration and then restart it, the sap server doesnt start, the startsap command gives the error "DB startup failed" i traced the  startdb.log file and found that it "failed to connect to server socket" after more searching i found out that it is possible that the ip defined in the /etc/hosts file for my node is getting changed after restart since i am able to start the database itself using dbmcli command the problem is still connecting to the node, i would like to know how to get the newly assigned ip address for the node so i can put it in the hosts file or a way to keep its ip static between restarts of the OS, any help is appreciated.

    Hi,
    This is SAP Business one system administration forum. Please find correct forum and re-post your discussion to get quick reply.
    Please close this thread by marking helpful answer.
    Thanks & Regards,
    Nagarajan

  • How to get PO CHANGE HISTORY from back end tables?

    Hi All,
    I need to get the PO Change history from the back end reason being users want to see not only the change made but who made the changes on those PO's. The PO change history.html doesnot give the information of the user who made changes to the PO. Can any one provide me the query involved in this html page. I can add the updated_by column to that. I built a query already but it is not giving me the field altered on the PO Line.
    I learnt that we can get the information from the archive tables but my question is how to know which field has been changed from the original PO to the revised PO. I am unable to figure out if that revision is for Unit Price change or amount change or Bill to change etc. i.e., as it shows in PO change History html page I need to see which field is altered on a particular PO. Is that possible?
    Thanks for your help!
    Prathima
    Message was edited by:
    Prathima

    Hi Anil,
    Turning Audit on PO_LINES_ALL helped to track the changes. I have a problem though.
    In the sense - Below is the query I created to track changes on Unit Price of a Po Line.
    SELECT
    poh.segment1 po_num
    ,pol.line_num po_line_num
    ,pola.unit_price price_changed_from
    ,pol.unit_price price_changed_to
    ,fnd1.description created_by
    ,fnd.description last_updated_by
    ,fnd2.description previously_updated_by
    --,decode(pola.audit_transaction_type,'U','UPDATE','I','INSERT') audit_transaction_type
    ,pol.last_update_date
    FROM po.po_lines_all_a pola,po.po_lines_all pol,apps.fnd_user fnd,apps.fnd_user fnd1,po.po_headers_all poh,apps.fnd_user fnd2
    WHERE pola.po_line_id = pol.po_line_id
    AND pola.audit_transaction_type = 'U'
    and poh.po_header_id = pol.po_header_id
    AND fnd.user_name = pola.audit_user_name
    and pola.unit_price is not null
    and fnd1.user_id = pol.created_by
    and fnd2.user_id(+) = pola.LAST_UPDATED_BY
    Now the problem is
    When I update a line twice. intially I changed the unitprice value of line 4 from .72 to 0.8 and later I changed it back to 0.8 to 0.72. Intial Changed to 0.72 shuld be 0.8 but it changed to 0.72 as it is pulling from po_lines_all table. How can you capture that changed to???
    po_num Line Changed from Changed to
    26603     4     0.72000      0.72000
    26603     4     0.80000     0.72000
    Please help.
    Thanks,
    Prathima

  • How to get the Change Document Header details for a given date

    Hi All,
    Can anyone help me on this Change Document Header details(CDHDR).
    Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
    So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
    Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
    Thanks in advance
    Regards
    Chakri

    HI,
    Go through the documenattion of the FM u can get the details.. and also where used list
    Regards,
    Nagaraj

  • How to support tracking changes in pages

    How to track changes in pages?

    Touch the wrench icon in the upper right corner
    Select "change tracking" from the drop down menu

  • How do I track changes and show redlines on an edited pages document?

    I have legal agreements that were sent to me in Microsoft Word.  How can I track and show redline changes when I convert to a Pages document to make my edits.  The redlined changes or edits, then need to be saved back in word doc format and emailed on.
    Thanks,
    Dana

    I think the Word document has to be saved with the tracking open so you can see it when you open the document in Pages. In Pages if you don't see the tracking go View > Show Comments, You might need to also go Edit > Track changes
    More about this can you read in the Pages User Guide, downlaodable from your Pages Help menu. Chapter 4.

  • How to get Track information in Itunes 12 for windows 8.1

    I just installed Itunes on my Asus. I am running Windows 8.1 . Some of my library which was already loaded in my Windows Media Player was brought into Itunes. It did not have track information because when I ripped it, I was working without an internet connection. The only reason I download Itunes was because the Windows Media Player doesn't use Gracenote. But when I went to get track info on the unidentified music, I went to the upper left hand corner, pulled down the menu, clicked on Get Info and having selected multiple tracks clicked "OK to edit multiple tracks" however nothing happened. These came from CD's I purchased. Don't tell me to re-load them. Again, I only came back to Itunes for track labels so if Apple is refusing to provide the information (because they think I will buy the music from their store), I would rather not use it. Please advise.

    iTunes can only fetch the information from Gracenote if it ripped the tracks. The information about the details of the ripped CD isn't encoded with the tracks themselves. You may find MediaMonkey's auto tag from web feature useful if you have filled in the artist and album fields, otherwise see Picard Tagger. iTunes doesn't detect changes made externally however I have a script called UpdateTagInfo which can get it to read the details. Note iTunes works best with MP3 files that have a single ID3v2.3 tag so check the preferences of any software you use to manipulate tags.
    tt2

  • How to get bom changed history?

    somtimes bom is changed with ECN , and sometimes without ECN, how to get all bom changed history?
    it appears that 'cdhdr' and 'cdcls' is the reference table, but some fields is implicit.  can you give me some idear?

    Hi,
    Kindly go through this link below,
    Previous Version of Bill of Material
    Hope it helps
    Regrds
    Mansi

  • How to Hide Track changes according to Specific user?

    Hello All,
         We are developing plugin and we have to hide the changes according to specific user. We are setting the track change preferences using the methods provided by ITrackChangeAppSettings interface.
         But as this interface is aggregated on kWorkspaceBoss it is applying the changes for all users.
         Will anyone please suggest how can I apply changes according to particular users? any help is appretiated.
    Thanks & Regards,
    Praveen

    Hello All,
               For hiding the tracked changes according to particular user,i have accept the changes according to specific user.But i have undo the changes it means before saving i have to undo the accepted changes.I am using VOS_RedlineObject::UndoSimpleChange() method but it is not working.
                Can anyone tell me other way for doing that?
    Thanks & Regards,
    Megha

Maybe you are looking for