How to get tree structure navigation in module pool program

please send me a sample code for getting tree structure navigation in a screen in module pool program.
ex.
masters
items

do a chain and endchain on the fields.Then insert the fields in to the required database.

Similar Messages

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

How to take backup of an entire module pool program with code,screen,etc.

Hi experts,
I have some important data in the ides server for which i want to take backup of them.
I have some question regarding the same.
1.How to take backup/download of an entire module pool program with code,screen,etc.
2.How can we take backup/download for a DB table with its structure?
3.How can we take backup of a search help?
Please give some suggestions abt the same.
Regards,
Ashesh.

Hi,
May be just for viewing, try downloading from SE80 transaction from the others option.
Here just try issuing the print, it will generate the spool.
Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
The only issue is, may be you need to take all the screens separately.
Regards,
Santhosh.

How to make a fld mandatory in module pool program?

I need help on following 2 things
I have module pool program created, in that many screen subscreens created.
1.I want to make a field mandatory
second one is, I have a general tab and data tab.
General tab screen - 2101
Data tab = 2102
In general tab, I have edited the values (change mode), when change the values and try to save it,
It is holding old value.but If i exucute the transaction once again, it is showing the changed value(new value)
For ex: there is a date field value is 03/08/2009
If I change this to 03/09/2009 and press on Save button from the standard menu, still it is showing the value 03/08/2009. but I execute this transaction once again it is showing the value as 03/09/2009
I will be thankful if someone helps me here

Hi Chitra,
Go to the properties of the filed select program tab and say input required.
then you will get the problem solved.
For second one actually its saving but not displaying the saved value at the same time ,
for this you write the select statement after saving , so that once save is execute m, select statement also will execute and it will display the newly saved value.
so after saving imdeatly u write the select statement.
like case sy-ucomm.
when 'SAVE'.
insert ztable.
select filed from z table.
endcase.
let me know if ur problem solved.
Regards
Rajendra

How to validate the field values in module pool program?

Hi Guys
     I am working with module pool programming.
     Here I want to validate the fields like below.
     with out filling all the fields if I click SAVE option it has to show a message that all fields has to be filled. This can be done by checking all the fields individually.
     I think it can be done through <b>LOOP AT SCREEN ......ENDLOOP</b>. sequence.
     If it is possible, can anyone help me?

You need to write the Module in between the CHAIN and ENDCHAIN statment in SE51
If you send a warning or error message from a module <mod> that you called using a FIELD statement as follows:
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1>.
FIELD: <g1>, <g 2>,...
MODULE <mod2>.
ENDCHAIN.
all of the fields on the screen that belong to the processing chain (all of the fields listed in the field statements) are made ready for input again. Other fields are not ready for input. Whenever the MODULE statement appears within a processing chain, even if there is only one FIELD attached to it, all of the fields in the chain (not only the affected field) are made ready for input again, allowing the user to enter new values. If the fields in the processing chain are only checked once, the PAI processing continues directly after the FIELD statement, and the preceding modules are not called again.
Look at the DEMO program DEMO_DYNPRO_FIELD_CHAIN.
ashish

How to change the logon language in module pool program?

Hello All,
I had created a module pool program and had desiged a screen.
When i am logged in English language i am able to see them in english as per the requirement it is working fine.
But the requirement is wen i am logged in DE then the selection-screen texts should show in English and not in German.
Kindly give me a solution for this.
Thanks & Regards,
Rajesh Kumar

Hi Rajesh,
This problem is because you have maintained a standard dictionary fields on selection screen and all the standard dictionary fields are maintained in DE language, on the screen layout, go to the attributes of that particular text field, there is a option MODIFIZ for dictionary fields (it is a drop down), selection F TEXT, now whatever the text u will define, it will remain same for all the languages, once u do this then u again login in DE,l u will see the text maintained by u and not the DE text.
Do reply if problem still persist.
point if useful.
Rohit G
Edited by: Rohit Gaharwar on Aug 11, 2009 1:24 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:30 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:37 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:38 PM

How to find out no of customize module pool program in SAP

Hi All,
I want to find out number of customize module pool program, Workflow, number of changes made to standard SAP objects (SPAU/SPDD in our SAP system
Regards
Sagar

Join the table with TRDIR to find module-pool program (TRDIR-SUBC = 'M')
Regards,
Raymond
Aravind. R was faster...
Edited by: Raymond Giuseppi on Jun 18, 2009 12:56 PM

How to get Tree structure in JSP page?

Hi,
I would like get data from the database and display the data in tree structure with the check boxes at each nodes on a jsp page with out using any third party tools. how can i do that? Do i require any new tags to fulfill this requirement?
can any one help me out by sending any example code?
thanks in advance.
Regards,
Reddy

Once you have the data in a list or something, can't you just use <c:forEach> and then output standard nested <ul> and <li> tags to give the tree structure.
<html>
     <style>
          li
               list-style-type:none;
     </style>
     <body>
          <form>
               <ul>
                    <li>
                         <input type="checkbox">Check 1</input>
                         <ul>
                              <li>
                                   <input type="checkbox">Check 1A</input>
                              </li>
                              <li>
                                   <input type="checkbox">Check 1B</input>
                              </li>
                         </ul>
                    </li>
                    <li>
                         <input type="checkbox">Check 2</input>
                         <ul>
                              <li>
                                   <input type="checkbox">Check 2A</input>
                              </li>
                         </ul>
                    </li>
                    <li>
                         <input type="checkbox">Check 3</input>
                    </li>
               </ul>
          </form>
     </body>
</html>

How to bold/color text message in Module pool Programming ?

Hi All ,
I need to bold /color a message in module pool . this message will come when certain conditions satisfied , currently this text message is displaying through variable . I Refereed program DD_STYLE_TABLE , but still not getting desired output . .Is there any other way to achieve the same ?
Could you please help me ?
Thanks in advance !!!!
Regards ,
Mayank K

Hi Mayank,
You can give a try this.
Within the screen you are calling give keyword
Leave to list processing
and then you can give whatever colors which are there in SAP
For making the text bold you can set Format intensified on or off depending on your requirement.
For more details you can refer to programs
program1 : demo_leave_to_list_processing
program2: demo_call_screen_from_list
Regards,
Sandeep Katoch

How to create a top include for module pool program

hi all..
I want to add my global declarations in one top inlcude.. There are so many other includes in my pgm. But how can i create top include explicitly. Also I have one normal report pgm attached with this module pool.

hi Cynthia ,
there are two ways of creating a top include at your situation ,
1) Insert an include <Prog name >TOP in your mpool program and cut n paste your declarations there .. check if this works ...
2)else .. create another m pool program in SE80 , while creating a pop up will ask for with TOP include ... check mark that and then proceed ..
anything of these two will work ...
Reward if helpful !!
Regards,
Ranjita

How to pass the field value from module pool program to smartform using submit?

// AT pai of module pool pgm i entered the following: here gv_orderid is my value to be available at smart form(driver pgm) & zmusic_store_smf is the driver program of my smartform.
gv_orderid= wa-itemid./
SUBMIT ZMUSIC_STORE_SMF VIA SELECTION-SCREEN
                              WITH p_order = gv_orderid
                              AND RETURN.
//AT driver pgm(zmusic_store_smf):
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'ZMUSIC_SMARTFORM1'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
   IMPORTING
     fm_name                  = lv_form
   EXCEPTIONS
     no_form                  = 1
     no_function_module       = 2
     OTHERS                   = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_form
   EXPORTING
*      iv_orderid = is_purchase_item-zorder_id.
iv_orderid = gv_orderid.
// here i'm trying to call my smartform('ZMUSIC_SMARTFORM1') from this driver pgm but unable to access the value of gv_orderid please help me out with this.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

How to get tree structure from file list?

I have got following rows from my select query presenting a folder structure:
PATH
/KING/JONES/SCOTT
/KING/JONES/SCOTT/ADAMS
/KING/JONES/FORD
/KING/JONES/FORD/SMITH
/KING/BLAKE
/KING/BLAKE/ALLEN
/KING/BLAKE/WARD
/KING/BLAKE/MARTIN
/KING/BLAKE/TURNER
/KING/BLAKE/JAMES
/KING/CLARK
/KING/CLARK/MILLER
/PALO/TEMP
On base of this data I need to build tree in my application by effecient way.
Therefore i would like to achieve data (SELECT with two columns) as bellow:
FOLDER        PARENTFOLDER
KING     NULL
JONES   KING
SCOTT KING/JONES
ADAMS KING/JONES/SCOTT
FORD     KING/JONES
SMITH    KING/JONES/FORD
BLAKE    KING
ALLEN    KING/BLAKE
WARD    KING/BLAKE
MARTIN KING/BLAKE
TURNER KING/BLAKE
JAMES    KING/BLAKE
CLARK     KING
MILLER    KING/CLARK
PALO      NULL
TEMP      PALOIs this possible to do it on SQL level(not PL SQL)?
Thanks

Perhaps something like this?
SQL> ed
Wrote file afiedt.buf
1 with t as (select '/KING/JONES/SCOTT' as path from dual union all
2             select '/KING/JONES/SCOTT/ADAMS' from dual union all
3             select '/KING/JONES/FORD' from dual union all
4             select '/KING/JONES/FORD/SMITH' from dual union all
5             select '/KING/BLAKE' from dual union all
6             select '/KING/BLAKE/ALLEN' from dual union all
7             select '/KING/BLAKE/WARD' from dual union all
8             select '/KING/BLAKE/MARTIN' from dual union all
9             select '/KING/BLAKE/TURNER' from dual union all
10             select '/KING/BLAKE/JAMES' from dual union all
11             select '/KING/CLARK' from dual union all
12             select '/KING/CLARK/MILLER' from dual union all
13             select '/PALO/TEMP' from dual
14            )
15 --
16 -- END OF TEST DATA
17 --
18 select distinct substr(path,instr(path,'/',1,rn)+1,decode(instr(path,'/',1,rn+1),0,length(path)+1,instr(path,'/',1,rn+1))-instr(path,'/',1,rn)-1) as folder, substr(path,2,instr(path,'/',1,rn)-2) as parent
19 from t
20       cross join (select rownum rn from dual connect by rownum <= (select max(length(regexp_replace(path,'[^/]'))) from t)) x
21* where instr(path,'/',1,rn) > 0
SQL> /
FOLDER                  PARENT
BLAKE                   KING
SCOTT                   KING/JONES
JAMES                   KING/BLAKE
MARTIN                  KING/BLAKE
SMITH                   KING/JONES/FORD
KING
WARD                    KING/BLAKE
ADAMS                   KING/JONES/SCOTT
FORD                    KING/JONES
TURNER                  KING/BLAKE
MILLER                  KING/CLARK
PALO
TEMP                    PALO
JONES                   KING
CLARK                   KING
ALLEN                   KING/BLAKE
16 rows selected.
SQL>

How to get the perious values in Module pool by pressing the space or back

Hi All,
I want to see the already entered values in the screen when ever pressing the backspace or space bar buttons..
For example in TCODE SE38 in program when i press the backspace or space bar , it is showing the perious opend programs, the same senario i want to implement . Could you please provide me with some example for this..
Thanks in advance
Regards,
Bharani

HI Rob,
Thanks for the reply...
history is turned on but for one field is coming and not for the other field in the same screen....
Regards,
Bharani

Issue with using GET n SET Parameter in module pool programming.

Hello Friends,
                     I am using SET n GET Parameter to access input values from a screen. But when I use it, the values are not transfered back n forth. Getting initial values.
Your expertise would be appreciated.
Cheers,
Senthil

Hi,
check this
Filling an Initial Screen using SPA/GPA Parameters
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
If you want to set SPA/GPA parameters before a program call, you need to know which parameters are linked to which fields on the initial screen. A simple way of doing this is to start the program that you want to call, place the cursor on the input fields, and choose F1 followed by Technical info. The Parameter ID field contains the name of the corresponding SPA/GPA parameter. Alternatively, you can look at the screen definition in the Screen Painter.
The technical information for the first input field of the booking transaction TCG2 looks like this:
The SPA/GPA parameter for the input field Company has the ID CAR. Use this method to find the IDs CON, DAY, and BOK for the other input fields.
The following executable program is connected to the logical database F1S and calls an update transaction:
REPORT BOOKINGS NO STANDARD PAGE HEADING.
TABLES SBOOK.
START-OF-SELECTION.
WRITE: 'Select a booking',
SKIP.
GET SBOOK.
WRITE: SBOOK-CARRID, SBOOK-CONNID,
         SBOOK-FLDATE, SBOOK-BOOKID.
HIDE: SBOOK-CARRID, SBOOK-CONNID,
         SBOOK-FLDATE, SBOOK-BOOKID.
AT LINE-SELECTION.
SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
                    'CON' FIELD SBOOK-CONNID,
                    'DAY' FIELD SBOOK-FLDATE,
                    'BOK' FIELD SBOOK-BOOKID.
CALL TRANSACTION 'BOOK'.
The basic list of the program shows fields from the database table SBOOK according to the user entries on the selection screen. These data are also stored in the HIDE areas of each line.
If the user selects a line of booking data by double-clicking, the system triggers the AT LINE-SELECTION event and takes the data stored in the HIDE area to fill them into the SPA/GPA parameters of the initial screen of the transaction. Then it calls the transaction. Since you do not suppress the initial screen using AND SKIP FIRST SCREEN, the initial screen may appear as follows:
If you would use the AND SKIP FIRST SCREEN option with the CALL TRANSACTION statement, the second screen would appear immediately, since all obligatory fields of the first screen are filled.
Regards
Edited by: K.P.N on Jan 9, 2008 5:21 AM

How to get tree structure navigation in module pool program

Similar Messages

Maybe you are looking for