How to get UDF's fieldid and UDK's keyid

Hi
I want to modify or delete UDF and UDK using code.When I use object's GetByKey method, there is another parameter(fieldid or keyid). But now I just know table name and fieldname and keyname. Could you please tell me how to get fieldid and keyid using code. thanks.
Best Regards
lu

Hello Lu Xilin,
FieldID and KeyID are the identification for UDF and UDK.
And you can find FieldID, KeyID in CUFD and OUKD table respectively.
Hope this helps,
Nick

Similar Messages

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

I have an old ipod and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else.

I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
Jane

Apple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

How to get purchase organization, PAYMENT_TERMS and INCO_TERMS for vendor?

Dear friends,
How to get purchase organization, PAYMENT_TERMS and INCO_TERMS for a vendor(LIFNR)? I couldn't fine these data in LFA1 table.
Thanks a lot!

Hi,
You can find ZTERM(Terms of Payment) in LFB1 table for a particular vendor (LIFNR) and company code.
and Incoterms INCO1 in LFM1 table for a particular vendor (LIFNR) and purchase organisation.
Hope this answers your query.
Regards,
Brajvir

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer

How to get back deleted photos and contacts???

First time to sync iphone 4 to computer and I have accidently deleted all my photos and contacts! All the photos from my computer are now in albums on my iphone. Any help in how to get back deleted photos and contacts would be greatly appreciated.
Thanks,
Sandra

Hi Allan,
Thanks for the reply. I restored from backup but now all photos from computer are gone, plus messages since yesterday etc.!

How to get the kerning value and set it to back use script?

hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

HT1483 Ipod froze. How to get over the problem and bring it back?

Ipod froze and not responding. How to get over this problem and bring back the Ipod ?

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

How to get both OTF data and spool at a time

Hi Experts,
My requirement is to get both OTF data and spool.
In 'OPEN_FORM' i tried passing itcpo-TDGETOTF = 'X'. itcpo- TDNEWID = 'X'.
I was able to get OTF data but spool is not getting generated.
IF i pass only itcpo- TDNEWID = 'X'. the spool is getting generated but not OTF data.
when both the fields are set i.e. itcpo-TDGETOTF = 'X'. itcpo- TDNEWID = 'X'.
the spool is generation is getting supressed.
Similarly when i tried to get OTF data by passing itcpo-TDGETOTF = 'X'. to 'OPEN_FORM' as i need to convert it to PDF and send it to vendors as email ,
The print preview in TCODE ME23n was not getting generated for 'MESSAGE' option 'External send'.
Please suggest me how to get both OTF data and spool at a time.

Hi Kartik,
This one is similar to my question to print and email invoice at same time. I pass itcpo-tdgetotf = 'X' in order to get otfdata and send email with the attachment of otfdata.
Now I have data in otfdata, but when I call print_otf function, I clear out itcpo-tdgetotf, and passed
itcpo-tddest = device_type but I still get error message said 'Handler not valid for open spool request'.
Can you give me a working example that you have otfdata table and print data from that table. I also post my question on other thread
submit report and export to memory
thanks

How to get Portal Login User and Its Related BP in CRM?

Hi,
An ABAP Webdynpro program is called in CRM from Portal user by a portal link. How to get the user ID and its related BP in CRM? Thanks!
The portal is integrated with ECC, and all users and BPs are maintained in ECC then replicated to CRM.
Best regards,
Hao

Hi,
Try the below code
IUserFactory userfact=UMFactory.getUserFactory();
IUser user=userfact.getUserByUniqueName(request.getUser().getUserId());
String usrid=user.getUniqueName();
And also you can get the groups assigned to user by using the below code
Iterator groups = user.getParentGroups(true);
while (groups.hasNext()) {
     String groupstr = (String) groups.next();
     IGroup g = UMFactory.getGroupFactory().getGroup(groupstr);
     response.write("Group name "g.getUniqueName()"<br>");
Regards
Suresh

How to get all paragraphs style and their fonts of a indesign file and write all info with para info into txt file with scripting

how to get all how to get all paragraphs style and their fonts of a indesign file and write all info with para info into txt file with scriptingstyle and their fonts of a indesign file and write all info with para info into txt file with scripting

I write the script this one works
          var par=doc.stories.everyItem().paragraphs.everyItem().getElements();
for(var i=par.length-1;i>=0;i--)
       var font=par[i].appliedParagraphStyle.name;
        var font1=par[i].appliedFont.name;
         var size=par[i].pointSize;
        WriteToFile (par[i].contents +   "\r" + "Style : " + font + "\r" + "FONT1 : " + font1 + "\r" + "Size : " + size + "\r", reportFilePath);
                        function WriteToFile(text, reportFilePath) {
    file = new File(reportFilePath);
    file.encoding = "UTF-8";
    if (file.exists) {
        file.open("e");
        file.seek(0, 2);
    else {
        file.open("w");
      file.writeln(text);
    file.close();
Thanks for all your support

I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?

I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?
should i come into the actual apple store or can you help online ?

Hi vickkjayy11 and welcome to Apple Support Communities,
Just to be clear, we are a peer to peer support community and have nothing official to do with Apple.
So to your problem, when you say:
"I reset my macbook pro a few days ago"
What exactly happened? Did you have a Time Machine backup?
Read this:
OS X: About OS X Recovery - Apple Support
It would help to know the exact model (size and year) and which OS you're using.

How to get UDF's fieldid and UDK's keyid

Similar Messages

Maybe you are looking for