How to get unit cost for finished goods in prod order

HI all,
IN a production order of type PP04, there is cost analysis you can get from CO03. This shows the cost for finished goods and BOM components. Would anyone know how the cost for finished goods are calculated ? The issue i have is that the unit cost of the finished goods is not correct. It is higher than what it should be. I looked at the moving avg price at material master but the cost used in calculation is different than in material master. Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ? Where is the higher cost coming from for finished goods material as shown in CO03 ? The BOM materials are picking unit cost correctly. Would this have anything to do with cost settlement ?
thank you.
joyce

Hi,
Finished goods price will depend on BOM componenet price, activity price and overhead price. Check whether this prices are picking correctly or not.
Regards,
Sreekanth

Similar Messages

Additional cost for finished goods

Hi all,
Here we are following fifo method valuation. we are using SAP B1 2007B PL 04.
I have a doubt how do we account the additional cost like Rent, Electricity etc.
and What G/L Account need to specify at determination level. Here we are determing G/L account with account groups.
I have a document for that but that doesnt give me clear picture of additional cost and
G/L accounts.
Kindly explain me in details with respectives to G/L Accounts
Regards
Shashi

Hi Shashi,
static costs should be included in a BOM as standard cost items. This will add to the item cost of the finished product.
Have a look at our Wiki here (Expert on Phone Newsletter April 2008):
[How to include labour cost in a BOM.|https://wiki.sdn.sap.com/wiki/display/B1/Howtoincludelabourcostina+BOM.]
You can substitute other costs for 'labour'.
All the best,
Kerstin

Split valuation for Finished Goods - Target cost was not updated

Hi,
We are following split valuation for 'Finished goods'.
Valuation typte 1 is for 'manufacture' and
Valuation type 2 is for 'External procurement'
For production orders with this material, we are not getting target costs. It is showing zero.
We have done release of standard cost estimate before creation of production orders and goods receipt for these orders. But still it is not updating.
Pls guide me.
Regards
MadhuSekhar Gupta

Hi,
Thanks for your reply.
At the time of variance calculation only the credit part of target cost will update and at the time of goods receipt debit part of the target cost will update.
Our client has done goods receipt but debit part of the target cost was not updated. and the order status is DLV.
I simulated the scenario in QAS by creating new finished goods materials (Industry-Construction) one is with split valuation and another is without split valuation, then the debit part of target cost was updated at the time of goods receipt and credit part was updated at the time of variance calculation for both the materials. So this problem was not arised because of split valuation.
Was this problem arising because of the material master data, because for one material it is updating and for another it is not for the same configuration?
Regards
MadhuSekhar Gupta
Edited by: gms gupta on Oct 22, 2011 3:39 PM
Edited by: gms gupta on Oct 22, 2011 3:41 PM

How to generate Serial(Unique) Number for finished goods?

Guru's,
How do i generate Serial(Unique) Numbers for finished goods.Suppose,if we get an order for a finished good A of 10 qty.We want to generate unique number to identify each and every A item separately for quality purpose.Any help is much appreciated.
thanks Guru's

Depending on serial control of item, you will need to generate serial numbers at the time of WIP Completion transaction using Serial Entry window (i.e. if serial control is At Receipt) or at the time of job creation (i.e. if you are using serial control as predefined)
In latter case, you will have to use MES or MSCA screens to perform serialized WIP completion.
Thanks,
Hrishi

How 2 get units like paise, cents for different currencies

hi
how 2 get units like paise, cents for different currencies
eg...
if i give EURO
i should get CENTS
Regards,
Naveen
Message was edited by:
        Naveen Natarajan

Hi Naveen Plz used This Function Module and let me known whether this is ur requirment or not : Plz look this function module ..........................
CALL FUNCTION 'SPELL_AMOUNT'
    EXPORTING
      amount    = amount
      currency = currency
      language = sy-langu
    IMPORTING
      in_words = amt_in_words
    EXCEPTIONS
      not_found = 1
      too_large = 2
      OTHERS    = 3.
IF sy-subrc <> 0.
    MESSAGE ' AMOUNT NOT CONVERTED TO WORDS : ' TYPE 'E' .
ENDIF.

Unit costing for materials assigned to activity - for material cost plannin

The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
Hence the following preference for material cost planning is required:
1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
2.Material cost based on unit costing done for the material in the project - If this is not available, then
3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
We are working with valuated project stock.
SAP Help says"
"Prices are calculated in one of the following ways:
u2022     Using the strategy in the valuation variant
u2022     Manually, using the invoicing plan
u2022     Using unit costing"
But how to get the cost as per the priority required when these three options are there is not clear.
I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
Pl. clarify
Thanks and regards
A.Saravanan

Hi All
I have psoted to service market place and got the reply; we have implemented also.
there were 2 suggestiosn:
1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
The problem is solved although
There is one more clarification required:
As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
Thanks and regards
A.Saravanan

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

Validation of batch nos. in migo for finished goods (fert)

I want to validate batch number entered by user at the time of migo for finished goods (fert) against the batchs in mcha. how can i do this? also is it possible to give f4 help to user for available bach nos. for the particular material ?

Hi,
Cannot you use message M7 668 for this purpose?
Problem is "batch has been already posted in stock"
Regards,
Csaba

Actual Cost for Finished Products

Hi All,
For Finished Goods calculation will use Semi finished Goods and Raw Material, while calculating the Finished Goods in cost object controlling system is picking the Standard Price Multiply Actual Quantity of semi finished goods.
My Client requirement is to calculate the Finished Goods based Actual Quantity Multiply Actual Price.
Is there any standard settings available or not?
Regards
Srinu

hi..
If you do not want to activate ML then all materials defined as price control "V" and Price deetermination as "2"
kkumar

PO for Finished Goods with Tax Code - Inventorise

Hi All,
Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO2). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO2). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
I had followed the following steps.
1) Material code- Chapter id maintained in J1ID
2) Vendor code excisable in J1ID
3) Maintain condition record in FV11 for the correct validity period
4) Check the PO creation date whcih should fall between condition record validity period
Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
I am not able to identify what is happening.
I will give the flow so that you can help me out.
1. Created Material - Finished with all views except - Classification, Forecasting,
Work Scheduling & QM
2. Create Info Record - Tax Code given
3. J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
4. FV11 - Maintained till - 31.12.9999.
5. FTXP - Tax Code is Maintained & it's working fine with other PO.
6. ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
7. In J1ID cenvat determination has been maintained.
Also the material type should be raw in material chapter id combination instead of RG1 even though the material is finished to take credit of excise it should be maintained as RAW .
Over Here if i see i am not able to capture (JMO2 A/P Eduty for Inven 0.000%) &
For Sale tax i have maintained it in FTXP as (A/P C Sales Tax Inv NVV 12.500% JIP1) but it is not appering in PO Tax code. I can See the sale tax is geting updated in Tax code for Inventorise if i give it with out ED in tax code. With ED it is not Appering in Taxcode.
Can you help me resolving the issue.
Once again thanks for youre help.
Thanks in Advance,
sapuser.
Edited by: sapuser on Dec 26, 2008 10:10 AM

Hi All,
Just give a check by entering cenvat determination table. System checks this by default for excise details. Enter i/p and o/p material as same.
Hope this will resolve you Problem,
Pherasath

My iphone 5 is not working. warranty expired.i purchased it in Fortress store,HONG KONG. How much it would cost for a repair or replacement??

my iphone 5 is NOT SWITCHING ON..its not charging .warranty expired by 2 months.how much it would cost for a repair or replacement.??
i purchased it in fortress store ,HONG KONG.

If Fortress is an authorized reseller for the iPhone, then look here:
http://support.apple.com/kb/index?page=servicefaq&geo=Hong_Kong&product=iphone
If Fortress is not authorized to sell the iPhone, then you will need to ask Fortress about getting your iPhone services.
Regards.

Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

Hello Production Planning experts,
I'm looking to solve the current business problem:
The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's APO. They run a batch job to query Sales Orders, Deliveries, available stock, stock in transit, etc. from sap and feed/upload it to the third party software so it can calculate the Finished Goods Production Requirements for them. They love the third party software, so replacing it is not an option. Since the third party software is already taking into account Sales Orders, Deliveries, available stock, stock in transit, etc. from SAP, it just outputs a "Finished Goods Production Schedule" by week.
My questions are:
1) What's the best way to upload something like that in SAP in the form of Planned Orders or something of that nature?
After i get that schedule in SAP:
2) Is there any way to calculate components' requirements for that "Finished Goods Production Schedule" alone? The company would like to IGNORE existing stock AND expected-goods-issues in the future (sales orders, deliveries, etc) for Finished Goods ONLY. The components calculations would work the standard MRP way, taking into account existing stock and AND expected-goods-issues in the future (sales orders, deliveries, etc)
I started looking into Master Production Schedule (MPS), but I don't know if that's the right approach since I'm not very familiar with it.
Thanks in Advance! I will gladly reward points for helpful/correct answers.

Hello Oscar
I suggest you to upload your production plan in the for of "Planned Independent Requirements" using BAPI BAPI_REQUIREMENTS_CREATE. Later, MRP will create planned orders to cover the PIRs.
If you don't want to consider the existing stock of the finished product, you should use the planning strategy 11 to create your PIRs. Take a look on the following link for more details about this planning strategy:
Gross Requirements Planning (11) - Demand Management (PP-MP-DEM) - SAP Library
Here you will find the following information:
The make-to-stock strategy gross requirements planning is particularly useful in mass production environments; it is often combined with repetitive manufacturing. This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
This strategy is also frequently used if there is a Material Requirements Planning system in a legacy system that needs to be linked to an SAP system which serves as a production execution system. The legacy system calculates a specific production plan, which has to be executed, regardless of the stock situation in the SAP system
It looks like this planning strategy is exactly what you are looking for.
BR
Caetano

Broken IPhone 6 how much will it cost for a refurbishment phone

broken IPhone 6 how much will it cost for a refurbishment phone?

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

How to get money back for Nokia n97?

Hi Guys!
I gave up with Nokia N97!!! I have a lot of problems with it. All of them are known. While this 2,5 months of using the device I was so **bleep** off and felt very uncomfortable while using it! Is that what we paid $700 for?? To see how good it is in the official video commercial and how damn SLOW, buggy and how bad the hardware is? I waited for software update and was hoping to see nice and fast device, oh! and working GPS! Instead - it's still the same "smart" which is most worse on nokia market. That's enough!
So now I have this question: How to get money back for Nokia n97 after 2,5 months of usage? or maybe exchange to n900? I will call to customer care center soon but maybe someone of you have done this already and you can give some tips?
Thank You!
Cheers
Hi guys!

put it up for sale, you have used it for over 30 days nokia will not give you a refund. sell it and buy yourself another device in this case. im giving mine away to a friend. he likes the n97 so its a win win
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Re: Automatic Reorder point Planning for Finished Goods

Hi All,
I have some doubts regrading the Automatic Reorder point Planning for Finished Goods.
For testing purpose I have entered the consumption values for two month.
Say :
Nov-08=13
Dec-08=20
ROL level=5
Safety stock =4
Model =constant
Now when I execute the forecasting,The system gives me the forcast for the next two month jan & Feb.
But when I run the MRP I see planned order for 5.So how to fulfill my forecast for jan?
Please Advice.
Regards,
Vivek

Hi Brahamakar,
Can you please help me.
Regards
Vivek

How to get unit cost for finished goods in prod order

Similar Messages

Maybe you are looking for