How to get unlimited JCE

Due to import control restrictions of some countries, the JCE jurisdiction >policy files shipped with the J2SDK, v 1.4 allow "strong" but limited >cryptography to be used. An "unlimited strength" version of these files >indicating no restrictions on cryptographic strengths is available for those >living in eligible countrieswhere can I get the unlimited strength version?

http://java.sun.com/products/jce/index-14.html
bottom of the page.

Similar Messages

How to get unlimited volume

I Believe that when i purchased my ipod classic in the UK quite a few years ago that they were being limited to the amount of volume you
could have on them compaired to other countries?? My 120GB ipod classic has 2.0.1 software on it and i wondered if there is any way
to get unlimited volume?? I seem to have issues playing it in my car through my FM transmitter too (volume is terrible), not sure if this is
due to a rather bad connection there is at the charging point??

wannabkiwi wrote:
I Believe that when i purchased my ipod classic in the UK quite a few years ago that they were being limited to the amount of volume you
could have on them compaired to other countries??
....other non-EU countries.
iPods purchased within the European Union are volume restricted compared to ones purchased outside the EU. You cannot over-ride this restriction.
However, there are several things you need to check and try;
make sure that the Volume limit (on the iPod) is not set on. This is different to the volume restriction. When you turn the volume up to maximum on the iPod's Now Playing screen, if the speaker icon on the right turns into a padlock, then the volume limit is on. To change this setting, go (on the iPod) into Settings/Volume Limit and set it so that the small up-facing arrow stays at the top end of the scale. The bar will not be at the top end of the scale unless you have the Now Playing volume set to maximum, so don't worry where the bar indicator sits.
I assume from what you say that you have an FM transmitter connected to the headphone socket of your iPod, so make sure that the Now Playing screen's volume is at maximum once you have checked the above. If this doesn't give you enough volume, try moving the FM transmitter to a different place in your car to see if it makes any difference. It may not, but it's worth a try.
If the above doesn't solve the issue, you could try buying a "Line Out Dock Cable" such as this; http://www.amazon.co.uk/FiiO-Line-Dock-Cable-iPhone/dp/B004M172HW/ref=sr_1_7?ie= UTF8&qid=1332457355&sr=8-7 . It takes the unrestricted output from the iPod's dock connector (obviously, I hope) which you then connect to the FM transmitter.
As a last resort if none of the above works for you, you could try a headphone amplifier such as this; http://www.amazon.co.uk/FiiO-E5-Headphone-Amplifier-Black/dp/B0026RJQJ6/ref=sr_1 _1?ie=UTF8&qid=1332457355&sr=8-1 one. There are other makes available, this was the first one I found.
Let us know how you get on.
I receive no payment or compensation as a result of the above products I have mentioned. There are similar products from other manufacturers.

How to get unlimited texting

I started with Alltel and verizon bought them. I never signed a contract with Verizon and I can cancel my cell phone (very old) anytime. I would like unlimited texting how can I get it without upgrading cell phone? I need some advice. Please someone help me!

2012110WJ, I can certainly assist you with options for adding unlimited texting to your plan. Do you have a Verizon or Alltel calling plan? If you have an Alltel plan, we can check your account to see if you may be able to add a Connect Pack to your account. This plan wasn't available for all Alltel plans so we can review yours. If you have a VZW plan, you can add a $10 plan for 1000 messages, switch to one of our Nationwide plus Text plans or switch to Share Everything as others have suggested. Let me know which plan you have so I can provide options.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

How can I get unlimited data for my iPad mini

HOw can I get unlimited data for my iPad mini

That is completely up to your cellular carrier. Contact them and ask.

How to get CDC-HI commercial license info ?

Hi,
I need to add SSL support to PhoneME CDC+FP1.1 (MR2) on an embedded target device. From other google results, seems the way to do this is to acquire CDC-Hi commercial license, so I can access SECOP (security option) source code (which is not open for 1.4.2) which then would provide security components (jsse, jce, etc) that support SSL. (Correct me if I am wrong)
I can't seem to find information on how to get CDC-Hi commercial license ? (About term & pricing) I've been searching Sun & Orcale site, couldn't find exact info. Can anyone point me to the right URL ?
Thanks!!
Pet9988

Please address you questions/request to:
[email protected]

How to get GUID all of user in OU

I have use exchang svr 2013 .
How to get GUID of user all in OU ?
currently i use scriptr exchange power shell
$username = "username"
$guid = (Get-Mailbox $username).ExchangeGUID
$upn = (Get-User $username).UserPrincipalName
$upnsuffix = $upn.Split("@")[1]
$ServerName = "$guid@$upnsuffix"
write-host $ServerName

Store all mailboxes in that OU in a variable and use a foreach loop
$mbx = get-mailbox -resultsize unlimited -organizationalunit "domain.com/OU"
foreach ($m in $mbx)
Your code
How to apply in exchange power shell ?

How to get password as string back from encrypted password byte array.

Hi All,
I am storing encrypted password and enc key in the database.(Code included encryptPassword method for encryption and validatePassword method for validating of password). Problem is that for some reason i need to show user's password to the user as a string as he/she entered. But i am not able to convert the encrypted password from D/B to original String.
Tell me if any body know how to get the string password back from the encrypted password byte array after seeing my existing encryption code.
//********* Code
private Vector encryptPassword(byte[] arrPwd)
try
// parameter arrPwd is the password as entered by the user and to be encrypted.
byte[] encPwd = null;
byte[] key = null;
/* Generate a key pair */
KeyPairGenerator keyGen = KeyPairGenerator.getInstance("DSA", "SUN");
SecureRandom random = SecureRandom.getInstance("SHA1PRNG", "SUN");
keyGen.initialize(1024, random);
KeyPair pair = keyGen.generateKeyPair();
PrivateKey priv = pair.getPrivate();
PublicKey pub = pair.getPublic();
/* Create a Signature object and initialize it with the private key */
Signature dsa = Signature.getInstance("SHA1withDSA", "SUN");
dsa.initSign(priv);
/* Update and sign the data */
dsa.update(arrPwd, 0, 12);
/* Now that all the data to be signed has been read in, generate a signature for it */
encPwd = dsa.sign();
/* Now realSig has the signed password*/
key = pub.getEncoded();
Vector vtrPwd = new Vector(2);
vtrPwd.add(encPwd);
vtrPwd.add(key);
return vtrPwd;
catch (Exception e)
private boolean validatePassword(byte[] arrPwd,byte[] encPwd,byte[] key) throws RemoteException
try
// arrPwd is the byte array of password entered by user.
// encPwd is the encrypted password retreived from D/B
// key is the array of key through which the password was encrypted and stored.
X509EncodedKeySpec KeySpec = new X509EncodedKeySpec(key);
KeyFactory keyFactory = KeyFactory.getInstance("DSA", "SUN");
PublicKey pubKey = keyFactory.generatePublic(KeySpec);
/* Encrypt the user-entered password using the key*/
Signature sig = Signature.getInstance("SHA1withDSA", "SUN");
sig.initVerify(pubKey);
/* Update and sign the password*/
sig.update(arrPwd, 0, 12);
return sig.verify(encPwd);
catch (Exception e)
Help upto any extent would be appreciated.
Thanx
Moti Singh

Hi All,
I am storing encrypted password and enc key in the
database.(Code included encryptPassword method for
encryption and validatePassword method for validating
of password). Problem is that for some reason i need
to show user's password to the user as a string as
he/she entered. But i am not able to convert the
encrypted password from D/B to original String.No, you are not encrypting the password in your code, you are merely signing it.
Tell me if any body know how to get the string
password back from the encrypted password byte array
after seeing my existing encryption code.It is impossible to retrieve the original text out of a signature.
You should read up on some encryption basics in order to understand the difference between signing and encrypting. Then you can find examples of how to encrypt something here: http://java.sun.com/j2se/1.4/docs/guide/security/jce/JCERefGuide.html.
Actually there is one class specifically for keeping keys secure, KeyStore http://java.sun.com/j2se/1.4/docs/api/java/security/KeyStore.html
- Daniel

How to get ridd of Garbage Values in the row from the Tables

Hi Experts,
I have an excel Sheet which has a value as
Name
ABC
PQR
XYZ
MNO
STU
DEF
JKL
So i converted that to a csv (Comma de-limited) file and created an external table out off it.
So when i try to match to "select * from table;" it displys the vlaue as below
*"ABC*
however, it should have been just ABC.
select length(Name) from Table;
O/p: 4 (It Should have been 3)
How to get rid off this garbaje character?
Please Help!!!!!!!
Regards,
Ravi R

You didn't post CSV file. I can't reproduce your issue using the following CSV:
"ABC"
"PQR"
"XYZ"
"MNO"
"STU"
"DEF"
"JKL"
SQL> CREATE TABLE EXT_EMP
2 (
3 EMP_L VARCHAR2(255)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY "TEMP"
8 ACCESS PARAMETERS
9 ( RECORDS DELIMITED BY NEWLINE
10 CHARACTERSET WE8MSWIN1252
11 STRING SIZES ARE IN BYTES
12 BADFILE "EXT_EMP.BAD"
13 NODISCARDFILE
14 LOGFILE "EXT_EMP.LOG"
15 SKIP 1 FIELDS TERMINATED BY ','
16 OPTIONALLY ENCLOSED BY '"' AND '"'
17 NOTRIM
18 (
19 EMP_L CHAR
20 )
21 )
22 LOCATION
23 (
24 'Employess.csv'
25 )
26 )
27 REJECT LIMIT UNLIMITED;
Table created.
SQL> SELECT *
2 FROM EXT_EMP
3 /
EMP_L
PQR
XYZ
MNO
STU
DEF
JKL
6 rows selected.
SQL> SY.

PETITION TO GET UNLIMITED DATA AGAIN

I am very sure that Verizon (or someone from verizon) reads these community forums, so I would like to start a petition to get unlimited data back for $30 or even better $20. Verizon, if you are reading this, please let me know how many signatures of Verizon Community Forums users I will need in order to get you to reinstate unlimited data. I have heard your reasons, but they do not please me. So we (the people) can make a stand to be treated fairly and not be taken advantage of by these companies. Please sign this petition. Aren't you tired of paying $30 for only 2 GB or $100 for 12 GB a month!?!?!?!?!

I mean this in the most polite way, but I am not asking you to tell me that it is over... I am asking for support. Okay, please do not take this as me yelling at you, I am simply saying this is a petition. I know that virtually everyone is dissatisfied with the abandonment of the unlimited data plan. I am just trying to get signatures in order to verify it so that Verizon will once again have unlimited data. Unlimited data is in such high demand that there must be dozens of forums in the Verizon community about it. Well, taking all of that into consideration, I move to make a petition.

Is there any way I could get unlimited data?

I am looking to get a new phone but I hate having only 2gb. So does anyone know how I can still get unlimited data?

Take over someone's line who has unlimited, but then you will not be able to get a 2 year contract for a phone.

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

TS3999 I had an icloud account setup in 2009 when I first got my family members each a mac. I let that account expire(we never used it) and I don't know how to get it off of my ical. It is not recognizing any of the information to reset the password?

I had an icloud account in 2009. We set it up as a family plan because my family had just changed from PC to Mac. We never used it and let the plan expire in 2010. My ical will not sync with my new iphone because it is linked to the family plan account that no longer exist. Because I don't remember my password, I tried resetting it. It says the personal information I entered is incorrect, but I know the information is correct...It's my birthday it asks for! Does anyone know how to get that account off of my mac without the account existing?

You were a MobileMe (not iCloud) subscriber in 2009 and this service has been terminated. However the login is an Apple ID and this never expires. What is your operating system? Do you have a MobileMe icon in System Preferences? - if so you should be able to sign out in it, but you may not have an iCloud icon to let you create an iCloud account, though you can do so if your iPhone has iOS 5 or above.
If you are getting login requests or other irritations from your MobileMe account you can go to (user)/Library/Preferences/ByHost and delete all .plist files beginning with com.apple.DotMac or com.apple.idisk, then reboot.
The minimum requirement for iCloud to let you sync your data is 10.7.5 though you can sync through iTunes (except with Mavericks).

I cant update nor download any applications. My password was always invalid. And other username is prompted richardca0521@yahoo.ca which is not my account. How to get rid of this apple id and use my account for download? I have registered this to itunes.

I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.

try and delete the apps and re-add them

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get unlimited JCE

Similar Messages

Maybe you are looking for