How to get UPK Library Location

Hi ,
I installed UPK Developer Client and while creating new profile wizard, asked for Library Location and the DBA tired once and it refused.
Can anyone tell me where to get Library Location?
Thanks
Mohammed

Hello,
It sounds like you're installing the Client which requires a Multi-user Server. If you have not installed a Multi-user Server, you should choose to install the Single User configuration instead of the Client. You can read more about this functionality in the online installation documentation. Additional information can be found in the announcement at the top of this forum: https://forums.oracle.com/forums/ann.jspa?annID=1175
Best regards,
Marc

Similar Messages

  • How to get existing library imported to new itunes install, old library was  not backed up or exported

    How to get existing library imported to new itunes install, old library was not backed up or exported.  This occured due to Win 7 user profile was corrupt.

    I know that in Mac OS X one can pick which library to use by holding down the option key while starting iTunes. What's the Windows equivalent?
    Press the Shift key.
    WIll the fact that the music is now on another physical drive make a difference
    No.
    I know the previous install is at least 7.0, but I have no idea about which point release.
    Try checking the content of the iTunes Music Library.xml file.
    Finally, what's the expected behaviour (or required procedure) with respect to reauthorization of this computer to use the same ITMS-purchased files?
    You will be asked to reauthorize the computer.
    (28446)

  • How to get Ship to Location Address?

    Hi Guys,
                 Can anybody tell me how to get Ship To Location Addresses?
              Bill to Party Addresses also?
    Thanks in Advance,
    Gopi.

    for bill-to-part check table kna1.
    select name1 land1 ... from kna1 into corresponding fields of wa where kunnr = <bill-to-party-no>.
    endselect.
    do the same for ship-to
    plz reward points if dis helps
    Message was edited by:
            user_15

  • My iPhone getting stolen,how I get the actual location my iPhone way using the apps find my iPhone?

    My iPhone getting stolen,how I get the actual location the full address to find my iPhone way using the apps find my iPhone?

    If you set up the Find My iPhone service prior to your iPhone going missing - the app is for tracking a device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored). Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to pay for it. 
    If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Contact the police and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • How to get the current location text in JTextPane

    hi
    i want to get the current location text in JTextPane ...iam useing
    caretPos = jtpMain.getCaretPosition();
    iam geting the current Locations at the same time i want to read the entery current line
    i used like this
    StartPos=jtpMain.getText();
    but iam geting entry data in JTextPane ... how can get current Locatin data ...
    pls help me

    If I understood your request, what you would like to do is to be able to retrieve Start and End Positions of a given line (a line and NOT the whole content of the JTextPane).
    JTextPane is a graphical component that is bound to a logical document. Documents are structured in elements. What defines an element is up to you to decide if you extend your own document but elements are by default paragraphs (runs of text ended by a carriage return '\n' character). So, I think that what you want to do is to retrieve the Start and End positions of the
    paragraph over which the caret is currently positionned. Then I think you have got to do the following :
    int intStartPos;
    int intEndPos;
    int intCaretPos;
    javax.swing.text.StyledDocument docStyledDoc;
    javax.wing.text.Element eleParagraph;
    intCaretPos = jtpMain.getCaretPosition( );
    //Get a reference to the default styled document bound to the JTextPane component
    docStyledDoc = jtpMain.getStyledDocument( );
    //Get the paragraph element from the document over which the caret is positionned
    eleParagraph = docStyledDoc.getParagraphElement(intCaretPos);
    //Get paragraph's offsets
    intStartPos = eleParagraph.getStartOffset( );
    intEndPos = eleParagraph.getEndOffset( );
    hi
    i want to get the current location text in JTextPane
    ...iam useing
    caretPos = jtpMain.getCaretPosition();
    iam geting the current Locations at the same time i
    want to read the entery current line
    i used like this
    StartPos=jtpMain.getText();
    but iam geting entry data in JTextPane ... how can
    get current Locatin data ...
    pls help me

  • How to add Software Library Location in OEM 11g to facilitate patching.

    Hi,
    I'd like to use patching deployment to patch a gold copy oracle home, that is not being actively used.
    I'm tryingt to configure the deployment setup and on the screen where it says.
    Information
    You are adding a Software Library location for the first time. Provisioning Archive (PAR) files in the directories $OMS_ORACLE_HOME/sysman/prov/paf and $OMS_ORACLE_HOME/sysman/admin/deploymentprocedures will be uploaded.
    Add a new Software Library by specifying directory location. In case of multiple Oracle Management Service (OMS) setup, specify normal preferred credentials for each host running OMS.
         * Software Library Directory Location      
    when I enter a location , e.g
    /oracleinstall/software/oemsoftwarelib
    whos persmissions are as follows
    drwx------ 2 oracle oinstall 4096 Feb 23 12:25 oemsoftwarelib
    I get just get the following
    Internal Error has occurred. Check the log file for details.
    does anybody know what the problem might be and which log exactly to look in?
    thanks

    Hi,
    You should look at OMS log/trace files in the .../gc_inst/em/EMGC_OMS<n>/sysman/log directory to get clues on the error.
    Check Support Note 1156825.1, which documents a similar symptom.
    Note that in a multi-OMS environment, the software library location must be readable and writable from all OMS hosts.
    Regards,
    - Loc

  • How can get the library items total file size

    Hi All,
    I want to get the total file size of the library and count how many file in library.
    would I use getItemsRequest can get them?
    or have another ways to do that?
    Thank You
    Jimmy

    Sorry, I don't have any ideas.
    Just so you know, the document management support is the lowest priority.
    There are not any active enhancements planned for document management.
    We added some support in 12.0.x for WebAccess, but there is none planned
    further.
    Preston
    >>> On Tuesday, August 21, 2012 at 2:26 AM,
    jimmyng25<[email protected]> wrote:
    > Thank you, Preston.
    > I will try to find other ways.
    > Would you please telling me if you have any idea?
    > I no idea to solve that, thank you very much.
    >
    > Jimmy

  • How to change the library location because i don't have enough memory in my internal hard disk

    can i change the library location because i don't have enough memory in my internal hard disk

    Hi ahmedmagdyelrasheedy,
    It is not clear what library you are trying to move, but if you are running out of space on your internal hard drive the most likely culprits are your iTunes music and your iPhoto library. Either of these can be moved to an external hard drive making room on the internal.
    For the iPhoto library see this article -
    iPhoto: How to move the Library folder to a new location
    To move the iTunes music see this article -
    iTunes for Mac: Moving your iTunes Media folder
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How to get itunes library from external drive to new computer

    i recently purchased a new computer w/the windows vista platform. there were posts regarding how to transfer the library w/playlists on this board, which i followed to the point of hitting shift while opening itunes, and choosing a library. however, when selecting such from my external drive, which has the itl and xml on it as well as the itunes music folder, it gives me an error noting it is locked or that i dont have write permission to use it. my external drive on my old computer was the G drive, now it is the F drive on new one. can anyone please advise what to do other than copy all music over and have to completely recreate all playlists?

    polydorus, this was the response/post that i found and it was posted by sweepea on 9/4/2007. and all my music is now from the external drive to the itunes music folder on my laptop and it let me keep all my playlists. thank you again for your help!
    I had that problem too. I tried to remove iTunes from my computer and then download it again, but that did not make any difference. Then I tried polydorus' answer ("starting iTunes with the shift key held down, when asked to choose a library, navigate to your iTunes folder and choose iTunes Library.itl"), but that did not work either and that same message about the library being locked appeared again.
    Then I had a brainwave. I deleted that iTunes library.itl file. (To find it, go to My documents, then My Music, then iTunes, and there is the itunes library file). I now tried to open iTunes by clicking on the iTunes icon on my desktop, nothing happened, as if I had not clicked on it at all. I restored the file from the recycling bin to where it was before. But that also returned me to where I had been before, i.e. I got that locked-library message again. So I deleted that file again. Then I tried right-clicking on the iTunes icon. On the little menu that appeared, I clicked 'Open' and hey presto, suddenly the iTunes set-up assistant appeared and everything went smooth from then on. When I checked, there was a file called iTunes library.itl again and this one worked OK.
    By the way, I did not lose any of my music downloads or podcasts when I deleted that file, so it's definitely worth a try.
    custom built Windows 2000

  • How to get itunes library off of PC and on to a macbook?

    Hi Friend!
    I have never had this much trouble trying to solve a problem but here goes.
    I recently purchased a new Macbook Pro in February, my wife gets my 2 yr old macbook.  I got all my data over to my new MBP, but my wife wants to get her itunes library from her old Toshiba laptop on this macbook because it has all her playlists.  Whats still on the Macbook is my itunes which my wife and i home share but she has her library, and i have mine.
    To even add more issues, we each have iphone 4's and Ipad 2's and we want our own stuff
    I tried to un-install iTunes a week ago on the Macbook.  did it, but it popped right back up when i rebooted the computer? 
    Please help
    Thanks so much for your wisdom!
    Dan

    Here's how to trnsfer
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
    I don't have an experience with i-gadgets so I can't advise you on separate libraries or not.

  • How to get back library after iTunes update?

    All of my music is installed in a folder named iTunes Music on a USB external hard drive. Everything was working fine until yesterday. I might have made a mistake. Without the external hard drive attached to my laptop, I downloaded and installed the most recent version of iTunes for windows. With the external drive attached, I opened iTunes and the library is gone and the entire music panel in iTunes is empty. I tried to change the library back to F:iTunes Music, the folder where the music is stored, but nothing happened. What do I do now? Please help.

    Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact. If you had moved your previous library to the external drive navigate to it and open the library file from there: How to open an alternate iTunes Library file

  • How to get a new location to show up under my target connectors

    Hi,
    I have created a new location and am trying to figure out when I will be able to see the location under my target module connectors.
    OWB 10.2
    I created a new location "loc".
    I created a module "mod".
    On "mod" module I set the the location to be "loc".
    I imported 2 test tables into the module.
    I created a simple test mapping that inserts data from one table into the other.
    It validates and generates fine.
    I try to deploy it and get an error messages
    ORA-12154: TNS
    RPE-01008: Recovery of this request is in progress
    I don't particularly care about the specific errors yet. What I am really trying to accomplish is to be able to get to the point where I can find my connector in the control center and to be able to drop it and create it.
    Can someone tell me how to force OWB to show me the connector in control center?
    Thanks
    Sam

    Hi,
    You created the loc for design center and configured for modules. You need to configure the control center separately for deployment.
    OWN allow you to have different locations for design and deployment. I hope that you are trying to have common location for Design and deployment.
    It is OK, but you need to tell your intentions to OWB in 2 steps.
    I hope this helps.

  • How to get old library back

    how do you get your old library back after you make a new one?

    An iPod can only sync with one iTunes library. If you try syncing with another one iTunes will ask you if you want to replace the current contents of of the iPod with what is in the iTunes library in the present computer.  That is the way it works.  You can however, manage music amont different computers. See:
    Using iPhone, iPad, or iPod with multiple computers

  • How to get itunes library moved from old computer to new computer?

    I have an ipod with itunes set up on an older pc. Recently purchased a laptop and migrated all of my info from old pc to new laptop (windows 7 format). They are listed in a separate file under 'My Music'.
    I downloaded the itunes 9.1 to my laptop.
    Now, how do I get the music files over to the itunes program?

    Or from within iTunes go to File>Add Folder To Library. Then select the folder that contains your music and iTunes will do the rest.

  • How to get document library column data through Programmatically

    HI,
    I have one scenario..here i have to get the particular document library column data...Like fetching List data.
    In LIST We will do LIke this:
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
                using (SPWeb web = site.OpenWeb())
                    SPList list = web.Lists["ListName"];
                    SPListItem item = list.Items.Add();              
                    item["Title"] = txtTitle.Text;
    item.update()
       But here we want to fetch  data from document library column data....
    I did following way....can any one suggest me....
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
                using (SPWeb web = site.OpenWeb())
                    SPDocumentLibrary documentLib = web.Lists["DocumentName"] as SPDocumentLibrary;
                    SPListItem items = documentLib.Items.Add();
    Thanks.....

    Hi,
    The code that you have posted is adding data to the list or document library. Do you want to add or fetch data from or to document library?
    You can refer following link for Inserting/Updating documents in document library:
    http://blogs.perficient.com/microsoft/2009/04/working-with-documents-stored-in-sharepoint-document-library-programmatically/
    For fetching data from document library, you can use following code:
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
    using (SPWeb web = site.OpenWeb())
    string documentLibName = "Doc_Lib_Name";
    SPFolder docLibrary = web.GetFolder(documentLibName);
    foreach (SPFile file in docLibrary.Files)
    var customColValue = file.Item["Custom_Column_Name"];
    Hope this helps!
    Regards, Shruti

Maybe you are looking for