How to get "Valuated unrestricted-use stock in previous period"

Hi!
I need the Valuated unrestricted-use stock in previous period for a material.
I'm using the MCHB table but CVMLA field doesn't match with the value calculated by standard tcode.
There is any FM that can help me?
Thanks
Salvatore

Problem solved

Similar Messages

  • In sales return how to get in unrestricted stock the commission number 653E

    Dear All ,
    We have return the sales order how ever the material is in Sales order stock
    How to get in unrestricted stock 411E i have tried GL account not maped
    Regards
    Ramesh

    Hi Ramesh,
    Your requirement is not clear
    you want to move the return sales order stock to unrestricted ?
    If not, please give some additional information
    thanks
    santosh

  • Inventory - Unrestricted Use Stock

    Hi Friends !
    At the BEx level. we restricted key figure to see the Unrestricted Use Stock
    Key Figure Name : TOTALSTCK
    0STOCKTYPE = A
    SPECIAL STOCK INDICATOR = #
    Current Output :
    CALENDAR WEEK                       CALENDAR DAY                           UNRESTRICTED STOCK
    25/2011                                       06/22/2011                                         100
                                                        06/23/2011                                         100
    Expected Output:
    CALENDAR WEEK                       CALENDAR DAY                           UNRESTRICTED STOCK
    25/2011                                       06/23/2011                                         100
    But the data in the column are showing double values. Is this the value this inventory works? or any other issues? Any hint?
    With Regards
    Rekha

    Hi Arun,
    my understanding is that for reversal and stock intransit you will have two types one is stock in transit from that warehouse and stock in transit to that warehouse. Accordingly you will have the values populated into either issues or receipts. And coming to BW if  you can notice that BW populates the cube with a special marker called process key indicator rather than movement type, it gets the moment type along with data and i would suggest the best way to reconcile your data is to always check in your cube by taking total of your receipts sock and issue stock( any stock type) and then subtract issue from receipt and compare with figure in r/3 (IF YOU ARE USING CUBE 0IC_C03) as you know this cube has non cumulative KF so i found thats the better way to get a considerable  reconciliation.
    Hope it helps!!!!!!

  • How to get multiple records using fn-bea:execute-sql()

    Hi,
    I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
    Regards,
    Nagaraju
    Edited by: user10373980 on Sep 29, 2008 6:11 AM

    Hi,
    Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
    For example:
    fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
    Id Name
    01 XXX
    02 YYY
    03 ZZZ
    I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
    <student>
    <Name>XXX</Name>
    </student>
    I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
    Please suggest.
    regards,
    Venkat

  • How to get iccid by using imei?i had lost my iphone and i want to find it back.

    how to get iccid by using imei?i had lost my iphone and i want to find it back.

    Ocean20 wrote:
    Not sure about ICCID but you can get your IMEI by going to the computer you normally sync to and open iTunes there click on edit then preferences then on the devices tab and then hover mouse over your backup and the IMEI and other info on your phone will appear
    Interesting. Yet another of the many Easter eggs dispersed throughout the system.

  • How to get the workcentres used in the routing out of 2 alternate routings

    Dear All,
    I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
    I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
    I passed this in to PLPO, The problem in PLPO is we don’t have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
    How to get the ARBID with respect to Groupcounter 1 alone.
    If a get the ARBID , I can get the ARBPL from CRHD.

    HI,
    Use PLAS Table also.  you have to use PLKO> PLAS> PLPO.
    Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
    Then pass these into PLPO.
    work centers from CRHD
    Regards,
    Krishna Mohan
    Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM

  • I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

    I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

    Hi , Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide .  Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part.  Here is a link to  HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one.   To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information.   Best of Luck!

  • How to get this output using sql query?

    Hi,
      How to get this output using sql query?
    Sno Name Age ADD Result
    1 Anil 23 delhi Pass
    2 Shruti 25 bangalor Pass
    3 Arun 21 delhi fail
    4 Sonu 23 pune Pass
    5 Roji 26 hydrabad fail
    6 Anil 28 delhi pass
    Output
    Sno Name Age ADD Result
    1 Anil 23 delhi pass
    28 delhi pass

    Hi Vamshi,
    Your query is not pretty clear.
    write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
    Regards,
    Kannan

  • How to get last column used in report sorting?

    hi,
    how to get last column used in report sorting?
    simon

    How to identifiy which column was sorted having different reports on page?
    just use:
    'YOUR_STATIC_REGION_NAME' instead of p_static_id,
    :APP_ID for p_app_id,
    :APP_PAGE_ID for p_page_id
    :APP_USER_ID for p_app_user.
    and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
    good luck and thank you Juergen.Schuster
    Simon

  • Block picking from unrestricted use stock when it is in schd. for delivery

    Dear Experts,
    I have 50 units in unrestricted use stock of particular material for a storage location in the plant.  I have made two outbound deliveries for this material.  When I pick 50 units of this material, these 50 units i can see in schd. for delivery and in unrestricted use stock also I can see 50 units  in MMBE.  Now, 50 units are in unrestricted use stock, once again i will be able to do picking of another 50 units of this material from the same storage location. (there is physical variation in stock.)  Now, when i will do pgi for one outbound delivery, the stock from unrestricted use will be debited and system not allow to do pgi for another outbound delivery.  (we don't want to allong negative stock).  Is there any way to block picking of the stock which are in schd. for delivery.  Thanks in advance.

    Maybe you should set proper availability check for your deliveries / materials.
    SPRO > SD > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning
    Here you can carry out of your setings.
    E.g.
    .. > Carry Out Control For Availability Check (transaction OVZ9)
    Here you should set for proper checking group / checking rule combination > "Include deliveries" (V_441V-VBBLP) field should be set.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744b51546011d1a7020000e829fd11/frameset.htm
    Regards,
    Csaba

  • Incorrect Unrestricted Use Stock Figure in VL10h

    Hi,
    The unresticted use stock figure in VL10h is not correct for a sales BOM scenario as described below.
    I have an order consisting of sales BOM:
    Top level material          Item category TAP (pricing at item)       Schedule line CT (no goods movement)         Stock 0
    Component material       Item category TAN (standard)              Schedule line CP (with goods movement)      Stock 1
    When running VL10h the unrestricted use stock column is showing 0 for both items - even though there is 1 in stock for the component.
    Thanks
    Caroline

    First check in MMBE whether the stock is not flowing against "Reserved against Delivery".  Alternatively, you can check in MD04 also.
    As you would be aware stock in sale order will be determined based on the schedule line category VOV6 where you should have checked the box "Availability".  The control is also in Requirement Class where you can make a check.
    thanks
    G. Lakshmipathi

  • How to get Listener Information using PL/SQL code

    How to get Listener Information using PL/SQL code

    user2075318 wrote:
    How to get Listener Information using PL/SQL codeThis approach (somewhat of a hack) can be used - but it does not really provide meaningful data at application layer.
    SQL> create or replace function TnsPing( ipAddress varchar2, port number default 1521 ) return varchar2 is
      2          type THexArray is table of varchar2(2);
      3          --// tnsping packet (should be 10g and 11g listener compatible)
      4          TNS_PING_PACKET constant THexArray := new THexArray(
      5                  '00', '57', '00', '00', '01', '00', '00', '00',
      6                  '01', '39', '01', '2C', '00', '00', '08', '00',
      7                  '7F', 'FF', '7F', '08', '00', '00', '01', '00',
      8                  '00', '1D', '00', '3A', '00', '00', '00', '00',
      9                  '00', '00', '00', '00', '00', '00', '00', '00',
    10                  '00', '00', '00', '00', '00', '00', '00', '00',
    11                  '00', '00', '00', '00', '00', '00', '00', '00',
    12                  '00', '00', '28', '43', '4F', '4E', '4E', '45',
    13                  '43', '54', '5F', '44', '41', '54', '41', '3D',
    14                  '28', '43', '4F', '4D', '4D', '41', '4E', '44',
    15                  '3D', '70', '69', '6E', '67', '29', '29'
    16          );
    17 
    18          socket  UTL_TCP.connection;
    19          txBytes number;
    20          rxBytes number;
    21          rawBuf  raw(1024);
    22          resp    varchar2(1024);
    23  begin
    24          socket := UTL_TCP.open_connection(
    25                          remote_host => ipAddress,
    26                          remote_port => port,
    27                          tx_timeout => 10
    28                  );
    29 
    30          --// convert hex array into a raw buffer
    31          for i in 1..TNS_PING_PACKET.Count loop
    32                  rawBuf := rawBuf || HexToRaw( TNS_PING_PACKET(i) );
    33          end loop;
    34 
    35          --// send packet
    36          txBytes := UTL_TCP.write_raw( socket, rawBuf, TNS_PING_PACKET.Count  );
    37 
    38          --// read response
    39          rxBytes := UTL_TCP.read_raw( socket, rawBuf, 1024 );
    40 
    41          UTL_TCP.close_connection( socket );
    42 
    43          --// convert response to varchar2
    44          resp := UTL_RAW.Cast_To_Varchar2( rawBuf );
    45 
    46          --// strip the header from the response and return the text only
    47          return( substr(resp,13) );
    48  end;
    49  /
    Function created.
    SQL>
    SQL> select tnsping( '10.251.93.30' ) as TNSPING from dual;
    TNSPING
    (DESCRIPTION=(TMP=)(VSNNUM=169869568)(ERR=0)(ALIAS=LISTENER))
    SQL> select tnsping( '10.251.95.69' ) as TNSPING from dual;
    TNSPING
    (DESCRIPTION=(TMP=)(VSNNUM=0)(ERR=0)(ALIAS=LISTENER))
    SQL>

  • How to get SharePoint Groups using Javascript in SP2013 ?

    How to get SharePoint Groups using Javascript in SP2013 , not JSOM please

    Here is the code that worked for me:
    <script type="text/javascript">
    var requestUri = _spPageContextInfo.webAbsoluteUrl + "/_api/web/sitegroups";
      var requestHeaders = { "accept" : "application/json;odata=verbose" };
      $.ajax({
        url : requestUri,
        contentType : "application/json;odata=verbose",
        headers : requestHeaders,
        success : onSuccess,
        error : onError
      function onSuccess(data, request){
    var s='';
     for (var i = 0; i < data.d.results.length; i++)
    s +=data.d.results[i].LoginName+'\n';
        alert(s);
     function onError(error) {
        alert("error");
    </script>

  • How to restore a table using RMAN with previous backup ?

    Hi everyone,
    we have to restore a table from 1 week previous backup using RMAN.
    Could you show me how to restore a table using RMAN with previous full backup.
    please Help me out.
    Thanks
    Info > oracle 10g, OS: AIX5L

    Hi,
    first of all you must have all the archivelogs since you want to recover your table from the previous backups.
    anyways if you want to recover your table then you need to perform incomplete recovery to the point where you loss the table for that you need to restore and recover your database.you likely to loose all the transcation which occurs to the point where you you loose your table.
    thanks..

  • How to get list of company codes with current period not opened?

    Hi,
    How to get list of company codes with current period not opened?
    Is there any way we can check whether the current period is opened for all company codes.
    If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
    Thanks
    Vineeth Varghese

    Hi,
    The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

Maybe you are looking for