How to get value on the table control in infotyp e0008

Dear Freinds
I have written a user exit ZXPADU02 for my requirement
as per the requirement in i have calculated wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
Nowe when do a Create or Copy for a rcord in infotype 0008 iam not
getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
Please let me knlow
regards

Hi Syamala,
The try to find the name of the table control and pass the values to it.
Of course you have to loop and endloop, the table control and mofidy it from the work area.
Message was edited by:
Sera

Similar Messages

How to Maintain Values in the Table control?

Hi,
I'm Saikumar.
I've done a table control program.
When I click SAVE or ENTER Button, the values are getting saved into the database(This is working alright)......but when I click those buttons, The values entered in the table control are getting cleared.
What should I do in order to have those values in the table control itself when I click SAVE/ENTER? (I need to create multiple records at a time)
What I've done is:
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
Refresh it_matgl.
endif.
I tried many ways but the vales are getting cleared in the table control? (I need to create multiple records at a time).
Please suggest a way to overcome it.
Thanks in advance,
saikumar

Hi ...
Just to add...
were there any values in the internal table it_matgl initially in the PBO screen to be shown to the users ?
if the answer is no...then......
i came across the same coding in DEMO_DYNPRO_TABCONT_LOOP_AT.....
here also in PAI..when we press enter..the values are not retained...
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
because i believe the modify statement is not working.coz the it_matgl is empty..pls check if sy-subrc = 0....after the modify statement....if it is not...then we need to insert the data into the it_matgl using an append statement
for this it_matgl needs to be with header line...
Pls explore the following....
data : it_matgl type table of XXXX with header line.
in the section
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
if sy-subrc <> 0.
move corresponding wa_matgl to it_matgl.
append it_matgl.
clear it_matgl.
endif.
endif.
Pls check and revert
Regards
Byju

How to update values in the table control at Cat2 transaction,

Hi,
i am working on cat2 transaction, here
i am using the exit_saplcats_006 and updating values at catsdb table, but i want to display this values at the table control in the cat2 transaction.
   can any one provide me solution for this same.
Regards

Hi Suresh
this is actual requirement
in the CAT2.
1. Add a new column for WBS description and derive the value as per the FS
2. Retrieve project number and description and update in the column specified
3. When a service order is selected it should do the same for 2.
4. Finally repeat for the worklist view (which is the section above)
   here i am able to display values at data entry area
for service order and network but not worklist area ?
    updation is not coming, can u plz go throw it..
Thanks
Chinna

Exit in DP90 and how to get value in the table

Hi all,
My requirement is when execute DP90(create billing request), the amount in the table must be validated when I click the "Billing Request" button.
Please tell me the user_exit, BADI or any other enhancement which can I use to validate the amount in that transaction.
And how to get the amount(amount to be Billed, Amount rejected) value in the table after that??
Thanx

Hi Teja,
Check the BADI (SE18) - BADI_SD_DPBP - Extensions in SD for DP90 with Billing Plan

Getting values from the table control to the program

Hi Gurus,
i created a program for sales order creation to transfer order creation and to insert multiple values i defined my own selection screen by inserting table control before that the code executed succesfully but after inserting the table control it is not creating any documents
code before inserting table control:-
REPORT zcl120_sales_n_delivery.
 SALES DOCUMENT CREATION
PARAMETERS: p_auart TYPE auart OBLIGATORY.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
PARAMETERS: p_spart TYPE vtweg OBLIGATORY.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
*ITEM
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
PARAMETERS: p_itcat TYPE pstyv OBLIGATORY.
DATA DECLARATIONS.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
HEADER DATA
header-doc_type = p_auart.
headerx-doc_type = 'X'.
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
item-material = p_matnr.
item-plant = p_plant.
item-target_qty = p_menge.
item-target_qu = 'ST'.
item-item_categ = p_itcat.
APPEND item.
itemx-updateflag = 'I'.
itemx-material = 'X'.
itemx-plant = 'X'.
itemx-target_qty = 'X'.
itemx-target_qu = 'X'.
itemx-item_categ = 'X'.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
 sales_header_in = header
 sales_header_inx = headerx
IMPORTING
 salesdocument_ex = v_vbeln
TABLES
 return = return
 sales_items_in = item
 sales_items_inx = itemx
 sales_schedules_in = lt_schedules_in
 sales_schedules_inx = lt_schedules_inx
 sales_partners = partner.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE / return-message.
WRITE: / 'Error in creating document'.
ELSE.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
 DELIVERY ORDER CREATION
*PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
 vbeln LIKE vbap-vbeln,
 posnr LIKE vbap-posnr,
 kwmeng LIKE vbap-kwmeng,
 matnr LIKE vbap-matnr,
 werks LIKE vbap-werks,
 END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
 WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
 WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
 INTO TABLE t_vbap
 FROM vbap
 WHERE vbeln = v_vbeln
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
 request = t_request
 createditems = t_created
 return = t_return.
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
READ TABLE t_created INDEX 1.
WRITE: / 'Delivery Number : ',
 t_created-document_numb.
 CREATE TRANSFER ORDER
DATA: w_tanum TYPE ltak-tanum.
CALL FUNCTION 'L_TO_CREATE_DN'
EXPORTING
 i_lgnum = '010'
 i_vbeln = t_created-document_numb
IMPORTING
 e_tanum = w_tanum
EXCEPTIONS
 foreign_lock = 1
 dn_completed = 2
 partial_delivery_forbidden = 3
 xfeld_wrong = 4
 ldest_wrong = 5
 drukz_wrong = 6
 dn_wrong = 7
 squit_forbidden = 8
 no_to_created = 9
 teilk_wrong = 10
 update_without_commit = 11
 no_authority = 12
 no_picking_allowed = 13
 dn_hu_not_choosable = 14
 input_error = 15
 OTHERS = 16
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.
WRITE: / 'Transfer order number',
 w_tanum.
Code after inserting table control:-
REPORT zcl120_sales_n_delivery.
 SALES DOCUMENT CREATION
DATA: p_auart TYPE auart .
DATA: p_vkorg TYPE vkorg .
DATA: p_vtweg TYPE vtweg .
DATA: p_spart TYPE vtweg .
DATA: p_sold TYPE kunnr .
DATA: p_ship TYPE kunnr .
*ITEM
data:
begin of it_item occurs 0,
 p_matnr TYPE matnr,
 p_menge TYPE kwmeng,
 p_plant TYPE werks_d,
 p_itcat TYPE pstyv,
end of it_item.
DATA DECLARATIONS.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA:
W_COUNTER TYPE I,
IT_NUM(6) TYPE C value '000010',
IT_LINE(4) TYPE C value '0001'.
CALL SCREEN 100.
HEADER DATA
header-doc_type = p_auart.
headerx-doc_type = 'X'.
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
loop at it_item.
CLEAR ITEM.
item-material = it_item-p_matnr.
item-plant = it_item-p_plant.
item-target_qty = it_item-p_menge.
item-target_qu = 'ST'.
item-item_categ = it_item-p_itcat.
APPEND item.
W_COUNTER = W_COUNTER + 1.
endloop.
DO W_COUNTER TIMES.
itemx-updateflag = 'I'.
itemx-material = 'X'.
itemx-plant = 'X'.
itemx-target_qty = 'X'.
itemx-target_qu = 'X'.
itemx-item_categ = 'X'.
APPEND itemx.
ENDDO.
Fill schedule lines
LOOP AT IT_ITEM.
CLEAR lt_schedules_in.
lt_schedules_in-itm_number = IT_NUM.
lt_schedules_in-sched_line = IT_LINE.
lt_schedules_in-req_qty = IT_ITEM-p_menge.
APPEND lt_schedules_in.
IT_NUM = IT_NUM + 10.
IT_LINE = IT_LINE + 1.
ENDLOOP.
IT_NUM = '000010'.
IT_LINE = '0001'.
Fill schedule line flags
LOOP AT IT_ITEM.
CLEAR lt_schedules_inx.
lt_schedules_inx-itm_number = IT_NUM.
lt_schedules_inx-sched_line = IT_LINE.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
IT_NUM = IT_NUM + 10.
IT_LINE = IT_LINE + 1.
ENDLOOP.
Call the BAPI
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
 sales_header_in = header
 sales_header_inx = headerx
IMPORTING
 salesdocument_ex = v_vbeln
TABLES
 return = return
 sales_items_in = item
 sales_items_inx = itemx
 sales_schedules_in = lt_schedules_in
 sales_schedules_inx = lt_schedules_inx
 sales_partners = partner.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE / return-message.
WRITE: / 'Error in creating document'.
ELSE.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
 DELIVERY ORDER CREATION
*PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
 vbeln LIKE vbap-vbeln,
 posnr LIKE vbap-posnr,
 kwmeng LIKE vbap-kwmeng,
 matnr LIKE vbap-matnr,
 werks LIKE vbap-werks,
 END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
 WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
 WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
 INTO TABLE t_vbap
 FROM vbap
 WHERE vbeln = v_vbeln
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
 request = t_request
 createditems = t_created
 return = t_return.
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
READ TABLE t_created INDEX 1.
WRITE: / 'Delivery Number : ',
 t_created-document_numb.
 CREATE TRANSFER ORDER
DATA: w_tanum TYPE ltak-tanum.
CALL FUNCTION 'L_TO_CREATE_DN'
EXPORTING
 i_lgnum = '010'
 i_vbeln = t_created-document_numb
IMPORTING
 e_tanum = w_tanum
EXCEPTIONS
 foreign_lock = 1
 dn_completed = 2
 partial_delivery_forbidden = 3
 xfeld_wrong = 4
 ldest_wrong = 5
 drukz_wrong = 6
 dn_wrong = 7
 squit_forbidden = 8
 no_to_created = 9
 teilk_wrong = 10
 update_without_commit = 11
 no_authority = 12
 no_picking_allowed = 13
 dn_hu_not_choosable = 14
 input_error = 15
 OTHERS = 16
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.
WRITE: / 'Transfer order number',
 w_tanum.
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TAB_CON1' ITSELF
CONTROLS: TAB_CON1 TYPE TABLEVIEW USING SCREEN 0100.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB_CON1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: UPDATE LINES FOR EQUIVALENT SCROLLBAR
MODULE TAB_CON1_CHANGE_TC_ATTR OUTPUT.
DESCRIBE TABLE IT_ITEM LINES TAB_CON1-lines.
ENDMODULE.
*& Module STATUS_0100 OUTPUT
 text
module STATUS_0100 output.
 SET PF-STATUS 'MENU'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
module USER_COMMAND_0100 input.
IF SY-UCOMM EQ 'START'.
LEAVE to screen 0 .
ENDIF.
endmodule. " USER_COMMAND_0100 INPUT
*& Module APPEND_IT_ITEM INPUT
 text
module APPEND_IT_ITEM input.
APPEND IT_ITEM.
CLEAR IT_ITEM.
endmodule. " APPEND_IT_ITEM INPUT
plz help me where the error is

Hi,
Do same as suggested by Ramesh. Add one user command button after clicking that do the looping and call new screen.
Ashven.

POPUP FM to get values from a table control?

I know about the FM POPUP_GET_VALUES to get one or more values from a popup dialog box. I would like to find a similar FM that allows getting values from a table control or something that allows entry of multiple lines of values. Is there such a thing, or do I need to write my own?

it depends on what values you want to enter, better write your own to have a control on the function.

How to get values from a table(in jsp) for validation using javascript.

hi,
this is praveen,pls tell me the procedure to get values from a table(in jsp) for validation using javascript.
thank you in advance.

Yes i did try the same ..
BEGIN
select PROD_tYPE into :P185_OFF_CITY from
magcrm_setup where atype = 'CITY' ;
:p185_OFF_CITY := 'XXX';
insert into mtest values ('inside foolter');
END;
When i checked the mtest table it shos me the row inserted...
inside foolter .. Now this means everything did get execute properly
But still the vallue of off_city is null or emtpy...
i check the filed and still its empty..
while mtest had those records..seems like some process is cleaining the values...but cant see such process...
a bit confused..here..I tried on Load after footer...
tried chaning the squence number of process ..but still it doesnt help
some how the session variables gets changed...and it is changed to empty
Edited by: pauljohny on Jan 3, 2012 2:01 AM
Edited by: pauljohny on Jan 3, 2012 2:03 AM

Read and display the field values in the table control

Hi Experts,
I am new to the Table Control. I have created table control using the wizard where i have mentioned the ztable while creating which consist of the following fields.
Item Number
Material number
Material Description
Net Price.
I would like to retrieve the material description, Order quantity and Netprice based on the selection of the material number from the table control field.
Thanks in advance.
Sunil Kumar.

Hi,
Try to implicate the following code to your requirement..
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
LOOP AT itab INTO wa_itab.
 CHAIN.
 FIELD wa_itab-item.
 FIELD wa_itab-material MODULE fetch_desc_price ON CHAIN-REQUEST.
 FIELD wa_itab-mat_desc.
 FIELD wa_itab-price.
 ENDCHAIN
 MODULE modify_itab.
ENDLOOP.
Inside the module.
MODULE fetch_desc_price INPUT.
SELECT maktx FROM makt INTO itab-mat_desc
WHERE matnr = itab-material.
SELECT STPRS or resp fld from MBEW
INTO itab-price WHERE matnr = itab-material.
ENDMODULE.
MODULE modify_itab INPUT.
MODIFY itab from wa_itab INDEX <table control name>-CURRENT_LINE.
ENDMODULE.

How to get values from RT table

Hello friends ,
I want to get earned basic from RT table T-code - pc00_m40_clstr
how to get that values for wage types
gaurav

Hi Gaurav,
The Function Module u2018 PYXX_READ_PAYROLL_RESULT u2019 generically reads a complete payroll result, that is for all country versions, from file PCL2 or from the buffer. In doing so, the payroll result is transferred to the PAYROLL_RESULT parameter. In the calling system, this must be classified as a complex structure according to the 'PAYxx_RESULT' dictionary structure. u2018 xx u2018 is the ISO code for the country. Now the payroll result is in the parameter FS_PAY99_RESULT. In this parameter the RT table is considered and the required values are moved into a internal table (say T_RT).
Regards,
Swapna.

How to get values from the page excpet pagecontext.getparameter

i have a requirement wherein i am passing paramteres from the "submit" button.but the problem being that,i have multiple rows in my page.what is happening is that my "submit" button is passing the values of the previous row,instead of the current row.this is i think because "commit" gets called later and params are passed before it.
how do i solve this problem
or if i can get to get paramteres in a advance table layout,i l be able to achieve my requirement.beacuse in advance table layout,i am not able to do pagecontext.getparameter("---" of the item

thanks guys,
i did try working with row refrence but it returns a null only.
my requirement was that i had update functionality as well as "add new rows" on the same advtbl bean.an whenevr i click on "add new row" and submit,i was always gettin the parameters for the previous row.
now,i have got a workaround to that,by having a radio button to select rows to update and whenever i click on "add new rows" ,i disable the radio button,and get the handle based on the value from radio group.
but still row refrence dint work for me.i will appreciate if sum1 can send me the code

How to update and retrieve the table control entries and field entries.

Hello everyone,
i have a requirement,
i have    company code , plant, fiscal year, posting period fields in the selection screen and then below that i have a table control which contains 4 fields invoice no., check number, check date and amount.
i have to enter the values and when i press SAVE button , these values have to update in a custom table which i had created.
please send me the coding how to do this object.
will be rewarded.
thanks in advance.

Hi Suresh
this is actual requirement
in the CAT2.
1. Add a new column for WBS description and derive the value as per the FS
2. Retrieve project number and description and update in the column specified
3. When a service order is selected it should do the same for 2.
4. Finally repeat for the worklist view (which is the section above)
   here i am able to display values at data entry area
for service order and network but not worklist area ?
    updation is not coming, can u plz go throw it..
Thanks
Chinna

How to get values in the combo box in a XML form?

Hi All,
    1. I have created a property which has "Default value" as "Clothings" and "Allowed Values(csv)" as Real Estate - Sales , Clothings etc" by navigating to KM > CM > Global Services > Property Metadata > Properties.
   2. In the XML form builder when I drag this property I get a combo box for this property.
   3. But when I preview this by going to Content Management > Folder > New > FORMS > and select my XML form project I get a preview but it is not showing me the default values in the combo boxes which I created using the property in XML form builder.
Please Suggest me as to how to get those values (which I mentioned in property) in the combo box ?
Thanks in Advance,
Jasmine.

Hi All,
I ll make the above Query Simple.
1.In Xml Form Builder when you drag a property which has some 3-4 assigned values so you are recomended to use a combo box.
2.But the problem after using COMBOBOX is I am not getting these values in the preview of the combo box.
3.Help Required please its urgent.
Thanks in advance,
Jasmine.

How to get data from the Tables (Can func.module help then how to write )

Hi,
Can anyone tell the use of functional module to extract the data from R/3.i am working on PM module and need to extract the status of work order and equipment which i can get from First i had to get objnr then i had to go to jsto in jsto i get stsma and estat. by using estat and stsma i can get status in table tj30t here estat is same as stat in jest table.
how to get all these in bw . any help.
I need status of work orders and equipments which exists in tj30t or we can get from tj30 tables in the fields txt30 and txt04
Any one pls help to get all these stuff from R/3 to BW
Regards
Srini-----

Hi
You need to enhance (write a user exit) for your Data Source.
Here are some links on UE:
Enhancment Framework
====================
SAP Help Enhancment Framework
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Enhancements in sap bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
User Exit Enhancments
Enhancement
User exit
BADI
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Reg's
Edan

How to get values from Hash Table

Hi all,
I have a hash table "lovResults" craeted with following code -
String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
Hashtable lovResults = pageContext.getLovResultsFromSession(lovInputSourceId);
values which I can see through SOP are - ******Value of lovResults is{roleid=1000, domainFV=CREATIVE, Role=Account Director}
How can I get the domain value "domainFV=CREATIVE" from hash table in a variable because I have to set this vaue in another field.
Please help me ASAP
Thanks
Amit

Hi Amit ,
Since you are successfully printing the values using sop's , please try this code
Capture the value in controller .
if(oapagecontext.getParameter("domainFV") != null)
String formvalue= oapagecontext.getParameter("domainFV") // ensure hashtable id is correct
Keerthi
Edited by: keerthioaf on Nov 26, 2012 8:46 PM

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to get value on the table control in infotyp e0008

Similar Messages

Maybe you are looking for