How to get vertical line screen effect?

How can I convert a grayscale photo to a vertical LINE B/W image (no grayscale)? I can't find a way to do it with the filters in PS CS6. Is there a plug-in that will do that?
Mac OSX10.6.6. Photoshop CS6.

No filter or plug-in nedded. Just go to Image > Mode > and make sure your image is in 8-bit mode depth, not 16 bit. Then, on that same menu convert the image first to Grayscale and then to Bitmap.

Similar Messages

How do I get the split screen effect?

How do I get the split screen effect?

Put a clip on V1, layer another above it on V2 or higher. Add CROP effect to higher track clip, crop left or right side to reveal V1 clip below.
Jeff Pulera
Safe Harbor Computers

Getting vertical lines on 27" iMac

As the title states, I'm getting vertical lines on my 27" iMac. Warrenty is long gone. These have started showing up maybe 6 months ago. They appear, from what i can notice, usually once the iMac start going to work. As you can see in the image, I was on Premiere when I took the screen shot. Futhermore, as you can see, I did not circle all of them, you'll see they are prominent across the screen. They arent discolored, the screen does not go black, they go away eventually when the computer stops doing excessive work. Anyone have any insight on this? They are simply annoying to look at and if its an early sign of something failing, I'd like to know.
Thanks in advance for any suggestions!

Would they still possibly be dead pixels if they are going back to normal after the computer calms down? In my little experience with dead pixels, they usually dont display any color or 'life' where as these are still emitting the 'proper' tones/hues of the information on the display. Also I forgot to note: they seems to move up consistently like the "marching ants" of a photoshop outline.
Lastly, I'd like to try any kind of troubleshooting before hitting the apple store if possible. I've lugged this thing there to replace a logic board and power supply before. I don't want to take it there and explain that it only happens sometimes, they check on it for the course of a few days only to find 'nothing', then I lug it back home to no avail. If I can run any kind of test at home first and get results that I can inform them, plus a print out of the image, if I end up having to go to the store.
Thanks for the quick response mende1

How to get 2nd line in smartforms using template

how to get 2nd line in smartforms main window using template. i have also defined loop .

if possible can you try with the TABLES..
Put one TABLE in your MAIN window
create table lines as per your requirment...consider all lines like 6 for header, 1 for main, 1 for total
Now, you will find three section under the tables: header, main, footer...
in header section, create a table line, assign one of the proper lines from the line types.. repeat for your all lines.
in main section, you can access your data form the loop.
the footer secion will be called, just after the main will be finished.
Regards,
Naimesh Patel

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How to print vertical lines for line items?

hi experts,
 can any one tell me how to print vertical lines for line items in ascript?
ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
thanks &regards
narendar

hi narendar,
Welcome to SDN.
 u can go for box command.
Use the box command with zero width for vertical lines.
Position the line by x position and y postion.
syntax :
BOX <xpos> <ypos>
 <width>
 <height>
 <thickness in twips> twips.
Regards,
Arun.
Reward points if useful.

How to get trending line in the graph

Hi,
I am using 10g. I have requirement as the following :
Name Date Metric
I can have bar graph against Date and Metric. My requirement is to have a trending line, so I calculated slope and regression line y=mx+c but I am not getting the right trend line. I can use regr_slope function to create a view in rpd but it doesnt support date values. Can you guys let me know how to get trending line like same in Excel.
Thanks

Hi,
It's better to do at UI level.
Can you please check the below link:
http://kpipartners.blogspot.in/2009/04/linear-regression.html
Hope this helps.
Thanks,
Pramod.

How to get the line in the template (smartform) with out using under score

Hi,
 How to get the line in the template (smartform) with out using under score,
 and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
 Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key UNDERSCORE.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
 Manish Kumar

I get vertical lines below the text when I type

After upgrading to Firefox 4 in Windows 7 I get vertical line that appear below what I type. This is not happening with other browsers. Anybody else experiencing this or have a solution?

This problem should not be because of hardware acceleration and I think I found the answer. I was getting odd graphical iisues in Firefox 4. Not just with the strange vertical lines. By disabling hardware accelration it did indeed fix the issue with the lines underneath where I typed in boxes. But the other problems were still an issue. I tried to fix the other issue by disabling all my addons and it did not make any difference. BUT when I restarted Firefox 4 in safe mode it did. Which led me to believe something else was at play here.
I remembered the UserChrome.css I had in my Firefox profile folder. I renamed that file and restarted Firefox. All my graphical bugs vanished. Out of curiousity I also enabled hardware acceleration. Voila! No more vertical lines either!
Now I did a reinstall of Firefox 4 just to check if it created a UserChrome.cc file but it did not. So I can only assume that there is something in that old file that others have when upgrading from Firefox 3 that causes this issue and other graphic probs.
I advise anyone who noticed this issue to try renaming UserChrome.css if it exists and see if it resolves the issue or not.

How do I add Green screen effects in iMovie 10.0.6

I have been working on a project and have green screen elements as well as pr keyed elements that I want to add to my film but am unable to figure out ow to do it. How do I add Green screen effects in iMovie 10.0.6?

Have a look at http://help.apple.com/imovie/mac/10.0/#mov82da1338a
Geoff.

How to get past gray screen on MacBook?

How to get past gray screen on MacBook?

Here are some initial things to try.
http://support.apple.com/kb/ts2570
http://lifehacker.com/how-to-troubleshoot-the-four-most-common-oh-sh-t-mac-48708 0511

How to get into desktop screen at once when client come into RDP session?

How to get into desktop screen at once when client come into RDP session?
When users login into terminal server I would like they see own desktop and open web page of corp portal.
How to do that?

Hi
Hope below links will help
http://blog.cloud-client.info/2012/10/03/tip-configure-a-keyboard-shortcut-to-minimize-fullscreen-citrix-or-microsoft-rds-sessions-for-a-linux-based-igel-os/
Also there are some Remote Desktop Services shortcut keys
http://msdn.microsoft.com/en-us/library/aa383500%28v=vs.85%29.aspx
Regards,
Rajesh J S

Why am I getting vertical lines below each letter I type?

I keep getting vertical lines below each letter that I type when filling in things with Firefox 4. There is one line created for each letter.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How to get file line count.

Hey guys,
How to get file line count very fast? I am using BufferedReader to readLine() and count. But when dealing with big file, say several GB size, this process will be very time consuming.
Is there any other methods?
Thanks in advace!

What I'd do is you create an infofetcher, register a listener, implement gotMore() and have that scan for '\n'
Some might suggest getting rid of the listener/sender pattern or use multiple threads to make ii faster. This might help a little, but only if your I/O is super-duper speedy.
you are welcome to use and modify this code, but please don't change the package or take credit for it as your own work.
InfoFetcher.java
============
package tjacobs.io;
import java.io.IOException;
import java.io.InputStream;
import java.util.ArrayList;
import java.util.Iterator;
* InfoFetcher is a generic way to read data from an input stream (file, socket, etc)
* InfoFetcher can be set up with a thread so that it reads from an input stream
* and report to registered listeners as it gets
* more information. This vastly simplifies the process of always re-writing
* the same code for reading from an input stream.
* 
* I use this all over
 public class InfoFetcher implements Runnable {
 public byte[] buf;
 public InputStream in;
 public int waitTime;
 private ArrayList mListeners;
 public int got = 0;
 protected boolean mClearBufferFlag = false;
 public InfoFetcher(InputStream in, byte[] buf, int waitTime) {
 this.buf = buf;
 this.in = in;
 this.waitTime = waitTime;
 public void addInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 mListeners = new ArrayList(2);
 if (!mListeners.contains(fll)) {
 mListeners.add(fll);
 public void removeInputStreamListener(InputStreamListener fll) {
 if (mListeners == null) {
 return;
 mListeners.remove(fll);
 public byte[] readCompletely() {
 run();
 return buf;
 public int got() {
 return got;
 public void run() {
 if (waitTime > 0) {
 TimeOut to = new TimeOut(waitTime);
 Thread t = new Thread(to);
 t.start();
 int b;
 try {
 while ((b = in.read()) != -1) {
 if (got + 1 > buf.length) {
 buf = IOUtils.expandBuf(buf);
 int start = got;
 buf[got++] = (byte) b;
 int available = in.available();
 //System.out.println("got = " + got + " available = " + available + " buf.length = " + buf.length);
 if (got + available > buf.length) {
 buf = IOUtils.expandBuf(buf, Math.max(got + available, buf.length * 2));
 got += in.read(buf, got, available);
 signalListeners(false, start);
 if (mClearBufferFlag) {
 mClearBufferFlag = false;
 got = 0;
 } catch (IOException iox) {
 throw new PartialReadException(got, buf.length);
 } finally {
 buf = IOUtils.trimBuf(buf, got);
 signalListeners(true);
 private void setClearBufferFlag(boolean status) {
 mClearBufferFlag = status;
 public void clearBuffer() {
 setClearBufferFlag(true);
 private void signalListeners(boolean over) {
 signalListeners (over, 0);
 private void signalListeners(boolean over, int start) {
 if (mListeners != null) {
 Iterator i = mListeners.iterator();
 InputStreamEvent ev = new InputStreamEvent(got, buf, start);
 //System.out.println("got: " + got + " buf = " + new String(buf, 0, 20));
 while (i.hasNext()) {
 InputStreamListener fll = (InputStreamListener) i.next();
 if (over) {
 fll.gotAll(ev);
 } else {
 fll.gotMore(ev);
InputStreamListener.java
====================
package tjacobs.io;
 public interface InputStreamListener {
 * the new data retrieved is in the byte array from start to totalBytesRetrieved in the buffer
 public void gotMore(InputStreamEvent ev);
 * reading has finished. The entire contents read from the stream in
 * in the buffer
 public void gotAll(InputStreamEvent ev);
InputStreamEvent
===============
package tjacobs.io;
* The InputStreamEvent fired from the InfoFetcher
* the new data retrieved is from start to totalBytesRetrieved in the buffer
public class InputStreamEvent {
 public int totalBytesRetrieved;
 public int start;
 public byte buffer[];
 public InputStreamEvent (int bytes, byte buf[]) {
 this(bytes, buf, 0);
 public InputStreamEvent (int bytes, byte buf[], int start) {
 totalBytesRetrieved = bytes;
 buffer = buf;
 this.start = start;
 public int getBytesRetrieved() {
 return totalBytesRetrieved;
 public int getStart() {
 return start;
 public byte[] getBytes() {
 return buffer;
ParialReadException
=================
package tjacobs.io;
public class PartialReadException extends RuntimeException {
 public PartialReadException(int got, int total) {
 super("Got " + got + " of " + total + " bytes");
}

How to type vertical line on macbook pro keyboards?

Please tell me how to type vertical line on macbook pro keyboards?

(1) It sounds like you might be using a Spanish keyboard. You should specify this to begin with. Unless you do, the default assumption is that you're using a US keyboard. The advice you received is correct for the US keyboard.
(2) To see how to enter any character available with your current keyboard, enable Keyboard Viewer, as described here
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh35878.html>
(3) There is no "alt" key on a Mac keyboard. You are talking about the Option (⌥) key. See (search for "Alt key" in)
What's it called on my Mac?
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/cpmh0038.html>
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>
(4) My advice is move on from Fraise. AFAIK, it's dead. Try TextWrangler, which is free and more capable.

How to get vertical line screen effect?

Similar Messages

Maybe you are looking for