How to get videos to work on 5gen Ipod with firmware v1.1
This is a reprint from a previous post by check_six6 so thank him/her.
-Connect your iPod to your computer, ensures its updated via iTunes, then disconnect it from PC and exit iTunes
- Download iPodSetup 2005-11-17 here:
http://appldnld.m7z.net/content.info.apple.com/iPod/ww/win/061-2225.20051128.PDW nw/iPodSetup.exe
- Download iPodWizard here:
http://sourceforge.net/project/showfiles.php?group_id=153441
(download the release, top link of the two)
- Uninstall iPod for Windows 2006-1-10 and reboot
- Install iPodSetup 2005-11-17
-Connect your iPod to PC, make sure iTunes is not running
-Make sure that the check box labeled "allow ipod to automatically start Itunes" is unchecked. Restart
-Launch iPodWizard.
-In the top left, click "Open Updater"
-Locate the iPod Updater.exe located in a sub-folder where you just installed iPodSetup 2005-11-17
-In the "Firmware:" drop down menu, select "5th Generation iPod (v.13.6.0)"
-Click "Load" just to the right of the drop down menu
-In the iPodWizard Essentials box on the right, it should say "Found 1 iPod drives:"
-Click "Downgrade Firmware". I'ts very quick.
-Close the iPodWizard
-Again, make sure iTunes is not running
-From your Start menu, run iPod Updater 2005-11-17 and click "Update", not "Restore"
-Once the update is completed (it takes a few minutes), exit the iPod Updater and run it again to view the new firmware number. It should read:
"Software Version: 1.0 (up to date)"
-Launch iTunes. A pop up window will ask you if you want to download the new software version 1.1. Tick the box "Do not ask me again" and click "CANCEL"
To avoid a majority of problems if you have the newest upgrade to itunes you must uninstall itunes and then uninstall Ipod updater for all updates restart and then reinstall the downgrade updater version and then you should be able to downgrade your firmware to version 1.0. I used 3-4 different programs to convert videos and they all lost sound and hung up in v1.1 downgraded to v1.0 and all work just fine. I don't know what the problem is but this solution seems to work.
bump
Similar Messages
-
Getting videos to work on my ipod
hi, i recently downloaded the music video crazy by gnarles barkley on itunes in .m4v compatible format, I have checked that everything on my system and iPod is up-to-date and have tried changing the video settings on my iPod, but the video doesn't seem 2 load, everytime I try it just crashes for about 5-10 seconds and then goes back again, can anyone please help me? my iPod is a 5th Gen Video iPod version 1.1.2 60GB. Thank you for taking the time to read this.
Martin0788
Windows XP 5th Gen Video iPod version 1.1.2 60GBI had the exact same problem. I used Videora off the internet. It's free and it converts all video files to a format that itunes and ipod recognizes. Try the following link.
http://www.videora.com/en-us/Converter/iPod/
Windows XP -
I still don't understand how to get video on my iPhone-HELP!
I have an iPhone and a iPod Classic and I just can't figure out how to get video on my either device, nothing I do works. I'm not talking about buying movies, etc from iTunes, I'm referring to videos I already have on my computer, converting them to the appropriate file extension (which I still have no idea what that is) and then where do I put these videos on my computer in order for iTunes to recognize them and pull them in?
I wish these devices were simplier to work with, where they acted as hard drives and you could just drag and drop what you wanted where and play them. But of course it has to be more complicated then this because Apple wants to control the users experience (sound familiar?)...I'm an advanced computer user and I have to admit that I'm embarrassed by the fact that I can't figure this out.
If anyone can give me SIMPLE instructions and a program to use to do video converstions I would appreciate it.
Thanks.Im not going to be a great help as im on OS X, bit Ill have a go:
For a number of reasons, iTunes and the iPod/iPhone only support a handful of types of video file. Mainly a file type called .mp4 which is normally h.264 with embeded metadata. This isnt a special Apple video file, and as long as it doesnt have DRM, can be played on many modern devices such as the Xbox360, PSP, PS3 etc.
The only limiting thing you have to watch out for is the resolution of the video as some devices will not be able to play the higher resolution content such as a 1080p HDTV stream on an iPhone, it just wont play!
So what you need to do, if you have videos in many different file types such as realplayer, wmv, and avi etc, you need top convert them to mp4, and then optionally add cover art and tag the file with show name etc.
None of this is built in, partly because Apple wants you to buy content rather than get it elsewhere, and partly as itts a little more complicated than making an mp3 at the moment.
On my Mac I use a program called Handbrake (free) that can rip from DVD to an iphone version, and a program called VisualHub that can convert just about any video type to iphone format. After encoding the video, i use a program called MetaX to correctly tag the video fiels so that they are easy to find in iTunes and so that I can make smart playlists etc. Do this and the files in iTunes act just like if you had purchased them from the store.
Now, I dont know whats good for Windows, but I did a google search and found this which is free and for Windows:
http://www.videora.com/en-us/Converter/iPod/
For tagging, this may be ok:
http://tvtagger.wordpress.com/
Also, I just found this guide which goes into more detail if you want it:
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-managin g-itunes-videos/
Good luck!
<Edited by Moderator> -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
How Well Will Video Podcasting Work?
How well will video podcasting work on a Mac Mini, an iBok, and a PowerBook? I'm going to get a Mac (no doubts here) and I want to do some podcasting (preferably video podcasting) and i was wondering which to get I don't doubt that all of them could do it exceptionally well. I was just wondering if I could do it well with the Mac Mini or iBook, but I could get the PowerBook but I would have to wait about an extra month to get it (money reasons). Almost forgot to mention I've done video podcasting with a friend to help him test it out and it went well, so I thought i would do it too when i get my Mac, but I was wondering ehich would be best.
You have landed in the iSight Discussions area. I do NOT podcast, so I cannot answer your questions directly.
If you intend to use GarageBand for your podcasting, you may get better advice in GarageBand 3 Discussions.
If you intend to use GarageBand and the other iLife 06 apps for your podcasting, any computer that meets the iLife: System Requirements should work.
If you are considering different software, check the system requirements for those applications to be sure you get compatible equipment. -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!
Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control. -
I downloaded iOS 5, now how do i get it to work on my iPod touch?
I downloaded iOS 5, now how do i get it to work on my iPod touch?
Connect the iPod to the computer and go to thesSummary pane for the iPod in iTunes and click on update. Se:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Also see:
iOS 5: Updating your device to iOS 5 -
How to get videos off my ipod back on my computer
I have to send my ipod back to have it fixed or replaced and Some of the videos I put on my ipod I deleted out of I tunes because my computer has a lack of space for all of it. I told the representative on the phone this and she told me someone online could tell me how to get videos off of my ipod and back on to my computer.
also, i don't know if you know this. is it possible to take my ipod into the apple store to have them fix it or replace it or do I have to mail it off. I didn't buy it at the apple store i bought it at circuit city.
-
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
How to get videos from touch, in full resolution?
How to get videos from touch, in full resolution?
I tried email, but that compresses them.Import them as you would from any digital camera.
http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf
Maybe you are looking for
-
I'm trying to download netflixs to my ipad but it keeps telling me to delete videos or pictures. I have no videos and have 60 pictures. I need some help.
-
Video problems after 10.0.5 update
Ever since I updated to Final Cut Pro X 10.0.5, all of my video has a green tinge at various places during the playback. Not sure how to correct it. It happens on my existing projects and new video I import. Here is an image of what I'm seeing, but i
-
Invoice for builder working on BT customers house.
It am a builder working on a BT customers home..while we where having some deliveries the lorry driver managed to snap the phone line cable..... This has now been repaired and very quickly to be fair..problem is the lorry driver is going to pay for t
-
Hi There. Please help. I created a form with some required field. when required field is not completed anywhere in form, how do make the mouse pointer to jump to that empty field automatically? Thanks guys. Louk63
-
If I make a book using iPhoto, what will it cost me to print a book approximately 30 pages long? Working on a wedding guest book. Also, is there any other information that might be helpful in this process? Thanks ahead of time .