How to get warranty service claim from nokia c5-03...

how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
Solved!
Go to Solution.

i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

Similar Messages

How to get the service address from service address number

Hi, IS-U Gurus:
I got the service address number by passing business partner number to BAPI 'BAPI_ISUPARTNER_GETDETAIL'
On return table of "bapiisubpa", the first field is service number, but what we need is service address,
How can I get the service address from service number ?
Thanks in advance.
Liang
Edited by: Liang Ji on Apr 27, 2009 6:57 PM

hi
are u looking for business partner address?
if so u can ref table but020, get its bp no. and then refer table but000 for its address.
Regards,
Sumedha

Unfamiliar icon & how to get it serviced

I let the ipod go too long without charging...
In addition to the exclamation point/folder icon, sometimes an unfamiliar icon (not one of those seen on the ipod support page) will appear. It has an exclamation and a battery.
The ipod can be recognized by computers and the music and data can be accessed, the problem is that when disconnected from the computer, the ipod will not turn on (except to give the "you have a problem" icons). I've gone thru the reset, charge (which it appears to be doing when connected), update, etc. and that does not help.
So, how to get it serviced?
I've had it for less than 6 months so it should be under warranty. Problem is that I'm moving out of the country in a few days, not enough time to have them get it back to me - and I don't think the warranty is good for outside the US.
I might be able to stop by an Apple store, but so far the genius bars are all booked up, will they look at it if I don't have an appointment?
ipod nano Mac OS X (10.4.3) with Mac

Whats happened is the battery has degraded where you have not charge it in forever.
the Battery with ! Icon is shown here on this page at apple along with a link to steps you may take if it still shows this icon after getting a full charge http://docs.info.apple.com/article.html?artnum=93936
Id say if you keep it connected to a charge and let it charge up for afew hours (Not like afew min or just one hour), then restore it most of the issues will go away.
If connected to a computer to charge, make sure the computer stays on and doesn't go into some "Sleep Mode". If on a laptop plug the lap up to its ac adapter while the nano is charging and don't close the screen down

Get warranty services abroad

Hi guys
I brought a laptop last year in June, now I work in china.
Recently, my laptop remind me to change battery.
I wonder could I get warranty services in china? and how?
and could I replace a free battery from HP?
Thanks!

Which notebook are you using? Business or Consumer one?
AFAIK, only Business line have limited international warranty.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

How to get a wallet (like in Nokia 6600) for Nokia...

Dear All,
Can you please tell me how to get a wallet (like in Nokia 6600) for my Nokia E63?
Narottam Das
Kolkata, India

Using the data from your Excel spreadsheet, this is what I get from the curve-fit functions:
Seems like a pretty-good fit to me. I'm not sure what you're trying to do with the polynomial evaluation stuff, though.
Message Edited by smercurio_fc on 07-30-2008 09:21 AM
Attachments:
Example_VI.png ‏17 KB

How to get a service notification number for given serial number

Please, someones know how to get a service notification number based on serial number.
In our process the notification can be created as first step (IW51) or can be created starting from service order (IW32).
Thanks in advance.
Luca

Hi pooja,
actually standard service request numbers are configured in spro->crm->transactions->Settings for Service Requests->Number Ranges. here they are maintain service request,incident,problem number ranges..
so when ever your creating any service request then that number range will appear in that object id.
you have to get that object id in your custom field get_method and based on that you have to change your number..
example:
current = me->bo.
current->get_property_as_string( EXPORTING iv_attr_name = 'OBJECTI_ID' RECEIVING rv_result = lv_id ).
here you will get object_id based on that you have to write your own logic to display custom value.
" write your custom logic to populate custom field. pass that custom field value into returning parameter.
value = custom_value.
Thanks & Regards,
Srinivas.

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

How to get the current week from sysdate?

Hi sir,
i want to know how to get the current week from sysdate?
thanks

Hi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to get payment document number from paid column in monthly invoice

Dear experts
I use SBO japan version and i need to know how to get payment document number from paid column in monthly invoice ?
in table MIN1, only contain invoice and credit note document number, there is no payment document number
thank you for your help
Best Regards
JeiMing

Dear Gordon
Yeah, you are right, i can use field MIentry in RCT2
thank you
Best regards
jeiming

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to get auto proxy configuration from plugin?

I need to retrieve the name of the client's proxy server to pass it along to my signed applet (because it doesn't seem to be getting the information automatically despite the fact that the java plugin is set to the use the browser settings for proxies).
The Java Plugin loads the proxy server information based on the browser preferences, but I haven't figured out how to retrieve that proxy information from the Plugin itself. Sometimes the javaplugin.proxy.auto.url system property is null, even if the browser (MSIE) is configured to use an auto-configuration script/url for the proxy server configuration. I can see in the Java Console that the plugin knows the auto-config url, so how can I access that property from within my applet?
Even if javaplugin.proxy.auto.url is not null, I don't know how to call the javascript function at that URL from within the applet to get the proxy server host name and port.
Does anyone know how to get the proxy information from the plugin?

Thank you! Indeed, the answer was there, but I hadn't been able to find it earlier (I guess I was searching on the wrong forums). For those who might be interested, here's the thread that helped:
http://forum.java.sun.com/thread.jsp?forum=30&thread=281981

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul

How to get warranty service claim from nokia c5-03...

Similar Messages

Maybe you are looking for