How to get waves maxx audio, dolby sound room for other toshiba laptops?

Hi, I have a A205-S5803 toshiba notebook that previously had vista , then xp, now windows 7 32 professional. I had a problem with xp where the sound volume was quite low even though turned up all the way. However, when I installed windows 7 professional and i think the realtek hd audio driver from toshiba the sound quality/volume greatly, greatly improved. I barely have the volume up below 50% and it is really loud. I even have some cool features-waves maxx audio and dolby sound room which greatly improve volume and sound quality.
I also have a nb305-410bn notebook which is running same windows 7 professional 32 bit but the sound quality is so low and the volume is low too even though settings are to the max. I installed the realtek official drivers which didn't help either. So I thought i would install the drivers from my other notebook since they helped improve the quality of that one. The sound did go up but I didn't get those features the wave and dolby. So I'm wondering has anybody any knowledge of how to enable install those features?

What to say dude. Seems to be something wrong with any system files or registry entries
Why you change something if you have no problems?!
Take my advice and never change a running system ;)
So now to your problem and some hints how to solve this stupid issue!
I would recommend restoring the OS to the early time point. Use the Microsoft tool called system restore.
Possibly you know this tool from the early MS XP OS.
You should find it somewhere in the Accessories.
If this procedure does not help you could use the Toshiba recovery CD and could install the whole OS again!!!
But before you will perform the installation from the recovery CD dont forget to backup your important data!!! ;)
Bye

Similar Messages

  • How to get an only audio line in working for HP ENVY 15?

    So, I have have an HP ENVY 15 (product number E1P05AV), and am trying to record audio (from a synthesizer, mono audio out) into a third-party program (REAPER, though Audacity would work too). I am trying to accomplish this through an audio line in through the combined headphone/mic port on the right side of the computer. However, all attempts/experiments so far have resulted in the computer recording from the internal microphone- not desired. I've browsed the web a bit, but have found nothing really of help.
    So, the question: how can I get the combined audio jack to work such that I can record audio from it, and not the internal microphone?

    Supernova187,
    I had the same problem with the HP "x2-k010nr". Bought the pc at OfficeMax/OfficeDepot and went to Radio Shack and bought the "adapter" since OfficeMax/OfficeDepot did not carry one. Spent days trying to figure out the same problem you are having.  Sent to pc to HP and they returned it and indicated that they could not find any problem. Went back to OfficeMax/OfficeDepot and bought an Asus Transformer and it worked properly for two days and the same problem happened and had to return it. There appears to be a very serious problem with external audio-in on any Microsoft 8.1 os system and external audio . I have given up on Microsoft os products until this problem is solved. I have been using my Gateway netbook with XP os for 4 years with zero problems with external audio-in or out.
    Ham123 Merry Christmas

  • Im connectioning my macbook to my hdmi port in tv.  I am getting no sound through the tv only the macbook speakers.  anyone know how to get my tv to read sound?

    Im connectioning my macbook to my hdmi port in tv.  I am getting no sound through the tv only the macbook speakers.  anyone know how to get my tv to read sound?

    The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2
    The Mini-DVI port doen't carry audio at all. The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.

  • When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    njordan wrote:
    I can't figure out how to get rid of the "click" sound before I send off the recording!
    drag the BottomRight edge of the region to the left, past the unwanted sound

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

  • How to get a wallet (like in Nokia 6600) for Nokia...

    Dear All,
    Can you please tell me how to get a wallet (like in Nokia 6600) for my Nokia E63?
    Narottam Das
    Kolkata, India

    Using the data from your Excel spreadsheet, this is what I get from the curve-fit functions:
    Seems like a pretty-good fit to me. I'm not sure what you're trying to do with the polynomial evaluation stuff, though.
    Message Edited by smercurio_fc on 07-30-2008 09:21 AM
    Attachments:
    Example_VI.png ‏17 KB

  • Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    This question has already been addressed in this thread:
    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
    John M
    National Instruments

  • Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Hello,
    Exactly which USB device are you referring to? Is the device a NI product?
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
    Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
    Swapnil P.
    National Instruments Engineer

  • Does anyone know how to get a preflight file signed by apple for the 21 mac

    does anyone know how to get a preflight file signed by apple for the 21 mac

    im trying to get a hold of them to see if they can deauthorize a computer. I am unable to do it because i can't get the internet to hook up. And i got a new laptop that i get the internet on but i can't authorize it unless i deauthorize the other one. i've called apple 3 times and theyve not been very helpful saying i need to get  hold of itunes.

  • How to get to see the usernames and passwords for wifi logins on iPad

    How to get to see the usernames and passwords for wifi logins on iPad. 

    You can't access that on an iPad. The iPad does not have a Keychain Access type app like the Mac has. Maybe an application like iExplorer on your Mac will let you see them, but you can't see them on the iPad itself.

  • Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?

    Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?
    Please help me. 
    Thanks

    If "Realtek High Definition Audio" is listed under the "Sound, video and game controllers" in the Device Manager then that is your sound driver. Some people have had luck with uninstalling the Realtek HD audio driver from their computer via the Device Manager (be sure to check the "Delete driver software for this "), and then reinstalling it. You can get the latest version of the Realtek HD audio driver from the Realtek download site.
    Many of us who have the Realtek HD sound driver have had to make several tweaks to improve the sound. Opening the Realtek HD Manager and enabling Loudness Equalization and setting the equalizer to Powerful helps with some of the low audio issues some of us have experienced with the Realtek HD sound drivers.

  • How, specifically, do I download the latest operating system for my Mac laptop?

    How, specifically, do I download the latest operating system for my Mac laptop?

    Choose About this Mac from the Apple menu and check the processor.
    If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
    If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
    (97036)

  • I currently have Iphoto v. 9.1.4.  There is an update v. 9.4.3 that I am unable to install.  I keep getting a message, "you have updates available for other accounts.  To update this application, sign into the account you used to purchase it."

    I have iPhoto v 9.1.4.  Update available is 9.4.3.  I keep getting this message:  "You have updates available for other accounts.  To update this application, sign into the account you used to purchase it".  I have done this and I keep getting the same message over and over again.  Please help me!

    Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
    1. Follow the instructions in this Apple Support article.
    2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
    3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
    4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
    5. Triple-click anywhere in the line below on this page to select it:
    /Library/Caches/com.apple.appstore/adoption.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
    Then repeat step 4.
    6. Select
    Store ▹ View My Account
    from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
    7. Launch iTunes and select
    Store ▹ Authorize This Computer
    from the menu bar.
    8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
    9. Contact Account and Billing Support.

  • How to get rid of the craking sound comming from my speakers

    I have creative 4400 4.1 speakers. Whenever i switch them on (without even booting the OS),Small sounds like the ones comming out of old gramaphone disks which resemble like a cracking sound is comming out of my speakers.
    can u tell me how to get rid of that sound , Is it a problem or is it natural in speakers.
    -Siva Kumar Reddy.CH.V

    If it's happening when they're turned on, but the PC isn't (or there is no source connected to the speakers), then you could try the speakers on another power outlet (in another room perhaps), to check if there's any interference or "dirty power". If there is other electrical equipment around something could be causing interference. It is possible though that there is a hardware fault.
    Cat

  • How to get that fancy audio console

    Hi can somebody tell me how Can I get that nice audio console?
    I dl:ed the new drivers for my card and when installed I only have the basic audio console and I would like to get that nice which came with the cd... can someone help me?
    Thank you

    Ok, but What's that in the cd? I don't wanna accidentally install old drivers over the new ones :E so how Can I only installe the console thing?
    And I forgot to mention that I have X-Fi xtreme musicMessage Edited by elmonen on 09-07-2006 0:03 PM

Maybe you are looking for

  • SONY PVM 14L4 not recognised via firewire

    Hi to all, I've rented a sony PVM 14L4 monitor for color correction that i'm trying to hook up to my dual G4 via firewire. FCP 5 doesn't seem to recognise it. I don't have the manual and am wondering if it is possible to hook it up directly through o

  • Using Nightly (64). Cannot find a way to "save" the cookies option settings in the web page GUI. Something I miss?

    I want to use the "use custom settings for history" option with cookies enabled in the Privacy view in Nightly 35.0a1 (2014-09-07). But there is no way I can save the changes, Nightly switch back to standard setting "Remember history" automatically.

  • Internet Keeps Dropping on my Macbook Pro Retina

    Recently on my Macbook Pro Retina, the internet keeps losing its connection. I've had this computer for a while and everything was fine until recently. I didn't change any settings and everything is fully up to date. The scenario goes like this, I wo

  • ICloud Contacts - How to sync with Google via Outlook(2010)?

    Hi there! want to sync business contacts with icloud and google contacts. Private: Using iCloud with MacBookPro and iPhone 4. "It just works!";-). Business: PC, Windows 7, Outlook 2010, iCloud Sync Tool, htc Desire S. PC sync via Outlook with Google.

  • Widows Metafile en InDesign CS2

    Hola a todos, en este momento me encuentro en algún lugar misterioso entre PageMaker e InDesign. El caso es que en PageMaker solía copiar y pegar imágenes como Windows Metafile (en la opción pegar especial) porque en los manuales que maqueto en el tr