How to get web pages opening within pages?

Just wondering how this is done or implemented. I visited and
researcehd several websites a while ago and observed that pages
were opening in pages instead of loading a new page.
For example: You go to a web page, the links are all above
under the page banner or on the side like in a side bar or Nav bar
and the content are on the right or the middle of the page.
So when you click on a link the page opens within the same
page with out a new page loading, just the contents gets replaced
but the entire page doesn't changed. Is this AJAX? I know you can
do this with Frames but I dont want to use frames, are there other
ways to get this accomplished?
Please explained or reference resources.
Thanks very much.
Patrick

opps.forgot the link:
http://www.dynamicdrive.com/dynamicindex17/ajaxcontent.htm
Sorry
Jeff
"Jeff" <[email protected]> wrote in message
news:fpkbii$on7$[email protected]..
> yes, there can be problems with frames and iframes, but,
if your looking
> for an easy solution its the way to go.
> AJAX offers another option. You might try looking at
this article, I
> believe you can adapt it to do what you want.
>
> Jeff
>
>
> "Jeff" <[email protected]> wrote in message
> news:fpk313$fjf$[email protected]..
>> <iframe src="
http://www.domainName.com/whatEverPage.htm"
width="480"
>> height="450" scrolling="yes"
name="content"></iframe>
>>
>> Jeff
>>
>>
>>
>> "Webethics" <[email protected]>
wrote in message
>> news:fpjjga$t5c$[email protected]..
>>> Just wondering how this is done or implemented.
I visited and researcehd
>>> several websites a while ago and observed that
pages were opening in
>>> pages
>>> instead of loading a new page.
>>> For example: You go to a web page, the links are
all above under the
>>> page
>>> banner or on the side like in a side bar or Nav
bar and the content are
>>> on the
>>> right or the middle of the page.
>>>
>>> So when you click on a link the page opens
within the same page with out
>>> a new
>>> page loading, just the contents gets replaced
but the entire page
>>> doesn't
>>> changed. Is this AJAX? I know you can do this
with Frames but I dont
>>> want to
>>> use frames, are there other ways to get this
accomplished?
>>>
>>> Please explained or reference resources.
>>>
>>> Thanks very much.
>>>
>>> Patrick
>>>
>>
>>
>
>

Similar Messages

How to create web page same as Struts tiles in OPA?

Hi,
How to create web page containing consistent Header,Fotter,left right pannel which embed OPA screen?

Web Determinations uses Velocity templates to configure the appearance of a paritcular page. You can configure these tempaltes to get the look and feel that you like.
For more information search for "Oracle Web Determinations Template Reference Guide" in the Oracle Policy Automation Developer's Guide (http://docs.oracle.com/html/E38272_01/toc.htm)

How to get the page number in the break section?

Hi expert,
The user wants the page number came right after the Break group name if the break section contains more than 1 page. E.g.
ABC Compnay
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 1
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 2
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
CDE Company
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
How to get the page number in section break level?

Hi Wes
* Create a Field on the margin.
* Set its "Source" to "Page Number"/"Physical Page Number".
* Click "Page Numbering" button.
* In "Reset At" list box, choose the Repeating frame that surrounds your detail group in the layout.
This should cause Reports to increment the page number until the "Company" repeating frame resets.
Regards
Sripathy

Quick doubt.. from cursor vairable how to get into page vairable

Hello
i am creating an apex page where i have 2 regions. From the Top region stores all fields entered into the bottom region
Text fields like first name and last name and address fields are in region 2(bottom).After region 2, i have a add person button.
Once i click add person, that person will get into top i.e region 1.
Now, Region 1 got person1 first name ,last name
person2, first name,last name
etc..
I am not able to display like p1_first_name,p1_laast_name as the list is not stable..it is growing and not showing the person who already got saved..I can retrieve them from DB using a cursor..But from cursor vairable how to get into page vairable..
appreciate ur help..
kp

Your explanation is not good enough. You have to make a better description of your problem or create an example at apex.oracle.com.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to get the Page Number in CS3 with VB?

Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next

> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com

How to Get last page number in report 10g

I want to get last page number in report but Current page number found from srw.get_page_num(n)
but i want to get last page number for conditional formating like this
srw.get_page_num(current_page)=last_page
pls help me how can get last page number;
pls help;
thanks in advanced;

Hi,
you can use the Property Print Object On for this.
Regards
Rainer

Safari has become unusable-it freezes, links are unclickable, then I get Web pages are not responding...

Safari has become unusable—it freezes, links are unclickable, then I get "Web pages are not responding..."
Safari has been my favorite browser for a long time. Nothing against the others but I have found it faster and better. Now I can really no longer use it. This has been going on and getting worse for atr least few weeks. Anyone know why?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

I am creating a list. Page 1 is full and I can't figure out how to get to page 2.

I am creating a list. Page 1 is full but I can't figure out how to get to page 2.

It would help if you told us which ages version you use? Are you still on MacOs 10.6.8?
Did you use text boxes?

How to get the page number according to MarkerID?

I want to get the page number according to the marker element in fdk. I can get the marktext and markid,How to get the page number according to MarkerID in fdk?

zhaopeng,
You need to first get the ID of the paragraph containing the marker (with FP_TextLoc), then get the top-level frame containing the FO_Pgf object (FP_InTextFrame), then get the page containing the FO_TextFrame object (FP_PageFramePage). Here is a function that you can send various objects to in order to get the page ID, including paragraphs (this courtesy of Rick Quatro, originally posted to the Yahoo Framedev list):
F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
F_ObjHandleT oFrame = 0;
IntT iObjType;
F_ObjHandleT oRow, oCell;
while(oObj)
    oFrame = oObj;
    iObjType = F_ApiGetObjectType(oDoc, oObj);
    switch(iObjType)
      case FO_SubCol:
      oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
      break;
      case FO_Tbl:
      oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
      oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
      oObj = oCell;
      break;
      case FO_Row:
      oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
      oObj = oCell;
      break;
      case FO_Cell:
      case FO_Pgf:
      case FO_AFrame:
      oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
      break;
      case FO_TextLine:
      case FO_TextFrame:
      case FO_UnanchoredFrame:
      case FO_Arc:
      case FO_Ellipse:
      case FO_Group:
      case FO_Inset:
      case FO_Line:
      case FO_Math:
      case FO_Polygon:
      case FO_Polyline:
      case FO_Rectangle:
      case FO_RoundRect:
      oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
      break;
      //endless loop prevention, stops the process when the top-level frame is reached
      default:
      oObj = 0;
      break;
//if we found the top-level frame, return its page ID, otherwise null
if(oFrame)
    return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
else return(0);
...so, you would do something like this if you have the marker ID:
F_TextLocT textLoc;
F_ObjHandleT pageId;
textLoc = F_ApiGetId(docId, markerId, FP_TextLoc);
pageId = GetPage(docId, pageId.objId);
Note: I'm not sure how this handles the case where a paragraph extends across two pages and the marker is located on the second page. My thought is that it might erroneously return the page where the paragraph begins. I don't know how to handle that.
Russ

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

How can I get web page to retain button count values

Hi,
I have a button which, each time it is pressed increments a
number. The number is shown in a text box. This all works fine, on
my web page. However if I close the web page and then reopen it,
the count number goes back to zero. How can I keep the number it
was (eg 10) and keep incrementing it ?
I have the button on Frame 1 and the text box on Frame 2.
Thanks,
Paul

maith wrote:
> Hi,
> I have a button which, each time it is pressed
increments a number. The
> number is shown in a text box. This all works fine, on
my web page. However if
> I close the web page and then reopen it, the count
number goes back to zero.
> How can I keep the number it was (eg 10) and keep
incrementing it ?
> I have the button on Frame 1 and the text box on Frame
2.
You will need to use Shared Object to store the info on user
drive.
It is Flash's native form of cookies and works locally (from
exe projector)
as well as in browser.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How to call web page to search document with parameters?

Hi!
i need to call a web page with access parameters to search a document and display this in .pdf format (external system).
Example:
PARAMETERS:
license code = xxx
society code = yyy
nickname = ...
password = ...
fieldsearch = ....
valuefieldsearch = ...
with these parameters, i must access in a web page https://....
and open .pdf file.
how to do? Can i do from SAP R/3?
Do you suggest any idea?
Thanks & Regards
Raffaella

Hi
Raffaella
you have to use Class cl_http_client to execute HTTP REQUEST (in your case using GET method)
Check this link
http://help.sap.com/saphelp_nw70ehp2/helpdata/EN/1f/93163f9959a808e10000000a114084/content.htm
You can also use the abap report RSICFCLTST01 for testing Abap http requests

How to get web pages opening within pages?

Similar Messages

Maybe you are looking for