How to Get Which Version of ODAC is installed on System

Hi!
How to find which version of ODAC is installed on system, as it is having many version like 11.2.0.3.0, 11.2.0.2.1, 11.2.0.1.2
and so many. Again in than some are for for 32 bit & 64 bit.
Is there any way to find which version is installed on System Using C# . I tried with registry key
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions\1\
but it is giving @<DB_VERSION>@
Thank you.
- Dattatrya Moin

If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg

Similar Messages

How to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg

How to know which version Netweaver is been installed in the system

How to know which version Netweaver is been installed in the system.
I wanted to know whether i have installed NW04 SP Stack 13 or higher.
Suggestions / Hints are wellcome
-Naren

hi,
Pretty simple yar
In portal goto>sysconfig>support-->u can find the Version in the content area at the bottom.
There u find the SAP WAS version and EP version.
in NWDS
goto help---->About sap NWDS -->then popup will disply you find the version.
Vesion: 2.0.14 like
Thanks,
Lohi.
Message was edited by:
Lohitha M

How to get shadow version of DTP in BI 7.0

How to get shadow version of DTP in BI 7.0..
while activating DTP i got error as :
"Shadow DTP_7KU3789XP6HX9XP3NS6PZ7XAP object can not be resolved - Chain inconsistent"
Please can you suggest me

Check if this note is applicable :
Note 1044054 - Correction: Shadow DTP with DataSource cannot be displayed

How to tell: Which version of camera raw do I have?

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

The F key works as described for me in CS6-ACR7.4 with ACR as the window with focus. The same function is available using the double-arrow-window icon at the right of the Preview checkbox near the top right of the preview area.
When in full-screen mode there is no title bar, but when I press the F key or click the double-arrow, again, ACR becomes smaller and I can see the title bar that includes the ACR version and camera model. This is on Windows7-64-bit on a 1600x1050 monitor. Perhaps you’re ACR’s title bar is off the top of the screen so you can’t see it, or maybe ACR optimizes some things if you have a smallish display—do you?
A plug-in is a program that interfaces with another program but is not independently runnable application, itself, bit is independently updatable, so in this instance, Photoshop doesn’t need to be downloaded and installed every time Adobe adds support for a few more cameras.

How to get current version of safari. without having safari browser?

how to get current version of safari. without having safari browser?

I don't understand the question. Safari is a browser.
Can you elaborate on what your are trying to do that initiated the question? People may be able to come up with some other option that gets you working the away you want.
When you respond, please post the version of the Mac OS and the version of Safari you currently have. Otherwise, people are guessing and the quailty of help you get plummets.

How to get the version no. for service po?

Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.

Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie

How can i know which version of Smartview is installed on my system ?

Hi All,
How can i know which version of Smartview is installed on my system ?

Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

How do I know which version of Firefox is installed on my laptop

How ca I tell which version of Firefox is installed on my laptop.

See:
* https://support.mozilla.org/en-US/kb/Finding%20your%20Firefox%20version
you are using Firefox 8, and Firefox 9 is here
* getfirefox.com

How to Specify Which Version of Rsync on Server Side

I have installed rsync 3.0.6 on both client and server side and know how to specify which version to use on the client side but am I right in assuming that if I don't specify some how on the server side it will use the version stored in /usr/bin/rsync? Do I have to move the version stored in /usr/local/bin/rsync to /usr/bin?
Thanks.

--rsync-path=PROGRAM specify the rsync to run on remote machine

How To Know Which Version of Firmware / software i...

Hi, I just bought my E71. How do I know which version of firmware is installed on my phone, and which version of the Realplayer is installed ? Thanks.

type *#0000# to check the firmware on the home screen
and to check real player's version go to 'About Player' in the options of real player
Message Edited by fdilbar on 07-Dec-2008 06:27 PM
Best Regards,
Faisal Mohammad

How to Get a Version of the ME

I purchase package Adobe CS5, but Can not write in Arabic when in use photoshop or and others like .Illustrator ,Dreamweaver ,InDesign
What is the solution?
How to Make package Adobe CS5 write Arabic
" How to Get a Version of the ME"

Do you want to use an Arabic typeface in PS, or have the PS interface in Arabic?

Hello, I was wondering how to get a version of a PDF document? My Adobe shot down and I have not had time to save my document with the notes had been taken. When I reopened there were no notes on my paper. I have a mac book pro. Thx.

Hello, I was wondering how to get a version of a PDF document? My Adobe shot down and I have not had time to save my document with the notes had been taken. When I reopened there were no notes on my paper. I have a macbook pro. Thx.

Hi Erika1987,
If you have not saved the document and Acrobat closed then it's not possible to retrieve the lost data on the pdf file.
Regards,
Rave

How to specify which version of a function to use

I tried to do what it said, but that resulted in error
PowershellPS C:\WINDOWS\system32> Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfiguration";ModuleVersion="3.4.0.0"}Import-dscResource : The term 'Import-dscResource' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At line:1 char:1+ Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfigura ...+ ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Import-dscResource:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

A: How to specify which version of a function to use

(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...

How to get os version on window phone?

how to get os version(8.0 or 8.1) on window phone?

The problem is
WP8.1 has many versions. Sometimes it is very helpful to know the exact version because some versions have limitations
or bugs.
Hong

How to Get Which Version of ODAC is installed on System

Similar Messages

Maybe you are looking for