How to get Windows 8.1 to show up under application requirements

So I'm still using 2012 SP1, and I've added CU3 to the setup (at least I think I have). If anyone knows how to check for this let me know.
Anyways, I'm able to deploy Windows 8.1 perfectly fine in my MDT task sequence with UDI, but I've ran into a hitch where applications do not deploy because Windows 8.1 is not listed under Operating Systems for requirements. There's only Windows 8 and Windows
RT.
What am I doing wrong? Do I need to update to R2 for this function?

Hi,
I think you need to upgrade to R2 if you cannot see Windows 8.1 listed under Operating Systems for Requirements in your SCCM 2012 sp1 CU4.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How to get a new location to show up under my target connectors

Hi,
I have created a new location and am trying to figure out when I will be able to see the location under my target module connectors.
OWB 10.2
I created a new location "loc".
I created a module "mod".
On "mod" module I set the the location to be "loc".
I imported 2 test tables into the module.
I created a simple test mapping that inserts data from one table into the other.
It validates and generates fine.
I try to deploy it and get an error messages
ORA-12154: TNS
RPE-01008: Recovery of this request is in progress
I don't particularly care about the specific errors yet. What I am really trying to accomplish is to be able to get to the point where I can find my connector in the control center and to be able to drop it and create it.
Can someone tell me how to force OWB to show me the connector in control center?
Thanks
Sam

Hi,
You created the loc for design center and configured for modules. You need to configure the control center separately for deployment.
OWN allow you to have different locations for design and deployment. I hope that you are trying to have common location for Design and deployment.
It is OK, but you need to tell your intentions to OWB in 2 steps.
I hope this helps.

HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How to get Windows Server 2012 trial license key?

How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)

Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim

How to get windows username printed on each page irrespective of application? we have cm6030f.

How to get windows username printed on each page irrespective of application? we have HP CM6030F.

Hi,
Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Also, you could see this page
http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
Q: I am a student. Can I apply for a pass?
A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get window system user?

Hi,
How to get window system user use PL/SQL(form develope6i)?

If you don't use Oracle database then you will have to do one of two things:
(1) Now I'm back in the office I can check D2KWUTIL. The version I have comes with Forms6.0, so it is somewhat out of date, but it has a method called WIN_API_ENVIRONMENT.Get_Windows_Username - which works for NT/95 only, although I'm sure a later version will support more recent OS.
(2) If that's no good then you'll have to use whatever facilities your database offers: I only know Oracle.
I also repeat my suggestion that you try the Forms forum for additional help. This is the Database forum and so is focused on serverside Oracle PL/SQL. For your needs the Developer Suite forums are better.
Cheers, APC

How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

Check with your telephone carrier or Android:
https://www.android.com/filetransfer/
Ciao.

I tried to make a smaller facebook photo more visible by trying to make it my screen saver and now i do not know how to get rid of. it always shows up on screen when i open my computer but is still small

== Issue
==
I have another kind of problem with Firefox
== Description
==
i tried to make a smaller facebook photo more distinct by hitting something to make it screen saver. it now shows up each time i open my computer but still is small. i cannot determined how to get rid of?
<blockquote>Edited by moderator to remove all caps. Please don't yell. -T</blockquote>
== This happened
==
Every time Firefox opened
== i tried to make a small facebook photo screen saver
==
== Firefox version
==
false
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox URIAPRO[]
== Plugins installed
==
*-Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape
*Shockwave Flash 9.0 r28
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*RealJukebox Netscape Plugin
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*6.0.12.1040
*Java Plug-in 1.5.0_01 for Netscape Navigator (DLL Helper)
*DRM Netscape Network Object
*Npdsplay dll
*DRM Store Netscape Plugin

This sounds more like a Windows question, than a Firefox question. When you say that an image shows up every time you open your computer, do you mean every time you turn on your computer, or every time you start Firefox?

C# How to Get Windows Version

Hi guys,
Im on a Project in WPF!
Well however I wanna check the Windows OS by MessageBox.Show(Environment.OSVersion.ToString());
I tried that on Windows 8.1 and I got as result: 6.3.9600.0
Well, on the Windows Server 2012 R2 i get the same result. I informed a little bit and found out with wikipedia:
Wikipedia Link
that Windows 8.1 and the Windows Server 2012 R2 have the same OS Version.
the same is with Windows 8 and Windows Server 2012
Is there any way to defferentiate Windows 8.1 and the Windows Server 2012 R2 resp. Windows 8 and Windows Server 2012
It would be important.
Thanks Guys!

How about this approach here:
http://stackoverflow.com/questions/6331826/get-os-version-friendly-name-in-c-sharp
public static string GetOSFriendlyName()
string result = string.Empty;
ManagementObjectSearcher searcher = new ManagementObjectSearcher("SELECT Caption FROM Win32_OperatingSystem");
foreach (ManagementObject os in searcher.Get())
result = os["Caption"].ToString();
break;
return result;
https://msdn.microsoft.com/en-us/library/system.management.managementobjectsearcher%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

HDD failure, I'd like to know how to get Windows 7 back on it.

Hello everyone, I've had a HDD issue lately, but before I move on to describe my issue, here are the specs of my notebook:
HP Pavilion dv6-3264ca
AMD Triple-Core CPU 2.2 Ghz
6GB RAM
128MB ATI Graphic Card
750GB Toshiba HDD
Windows 7 64-bit
The issue:
Recently I've had a very unfortunate HDD failure. The recovery partition wouldn't even load. I tried booting my notebook on Linux with the HDD still attached, and it wouldn't read. I extracted the HDD and placed it in an HDD-enclosuer and it still wouldn't load on Windows XP or Vista or 7. It would however read in the device manager of Windows and also in the BIOS.
I needed to extract some high-priority data from there so I managed to retrieve all my data safely through a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help it be usable again, and if that were to happen, the recovery partition would then be removed in the process.
In addition to that, I would like to install Windows 7 64-bit onto the drive, but the notebook box did not come with an installation CD, which is quite frustrating. Is there any way HP can let me download Windows 7 through some warranty service?
I have a one-year warranty on my laptop.
So in closing, I would like to know if I can get Windows 7 back onto my HDD for free, or if I need to go about buying Windows 7 again.
Any advice from you kind folks?
This question was solved.
View Solution.

Hi,
Here are Two options.
1. If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
2. You can order a replacement set of Recovery Discs using the link below - these cost around $30 if you live in the US.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to get windows 7 on mac

Hello I have bought my Macbook Pro 13" 2 weeks ago how install i windows 7 on it what do i need to install windows 7??

hans_k wrote:
So i need copy disk of windows 7 ISO image
You know where I can get windows 7 ISO Image??
You buy it, try Amazon.

How to Get Windows 10 Image for Galileo

I purchased a Galileo gen 2 board and would like to start prototyping a project I have in mind -- but I cannot for the life of me figure out how/where to get a Win10 image for the board. I've signed up (twice) through the 'Connect' web site (and gotten
zero replies), and the links on the Connect site that talk about getting an image if you bought your board yourself just lead to a 404 error.
Any suggestions?

Figured this out.
sign up/join
MICROSOFT WINDOWS FOR WINDOWS DEVELOPER PROGRAM FOR IOT EULA
Under
Windows Embedded Pre-Release Programs Home / Programs Windows Developer Program for IoT
once you've joined and click on link below, you will see the downloadable link to get 170mb 9600.16384.x86fre.winblue_rtm_iotbuild.150309-0310_galileo_v2.wim - this file under EULA cannot be shared.
Hope this helps someone else.
Go create something using IoT!

How to get windows form object of a MMC snapin node using MMC automation object model

Hello,
I am using automation object model for an existing mmc file and just trying to traverse all nodes of it. And i am able to do so.
My query is : how can i get the access of windows form object of a particular node . Windows form is present in result pane of a node, i want to get access of that so that i can perform some automation on that form.
http://msdn.microsoft.com/en-us/library/aa815049(v=vs.85).aspx
I found that if OCX control is in result view of any node, then "view object -> control object property" returns
the automation interface supplied by the control in the result view.
However, if result view is HTML view then how to get the automation interface of that result
view.
Thanks in advance,
Sumit

Hi Sumit,
I read the link you provide above. It seems that when you want to achieve your target by using MMC automation
object model, you need to use codes. Based on the programming language, if use VB, I suggest you post the question in
VB Forum. If you want to use C#, may post in
C# Forum.
In addition, there is an answered question, may help you to find the correct forum.
MMC development forum?
http://social.microsoft.com/Forums/en-US/3796a8e9-674e-4da0-a40e-4e4b69575c8e/mmc-development-forum?forum=whatforum
Since, it’s more related to development. We may can’t provide some more detailed information. Thanks for your
understanding.
Hope this helps.
Best regards,
Justin Gu

How to get windows username & password

Hi friends,
Requirement is to get windows username & password,
My server is Tomcat4.0,
My code in login.jsp page is
<%
String auth = request.getHeader("Authorization");
if (auth == null) {
response.setStatus(response.SC_UNAUTHORIZED);
response.setHeader("WWW-Authenticate", "NTLM");
return;
if (auth.startsWith("NTLM ")) {
byte[] msg = new sun.misc.BASE64Decoder().decodeBuffer(auth.substring(5));
int off = 0, length, offset;
String s;
if (msg[8] == 1) {
off = 18;
byte z = 0;
byte[] msg1 = {(byte)'N', (byte)'T', (byte)'L', (byte)'M', (byte)'S',
(byte)'S', (byte)'P', z,
(byte)2, z, z, z, z, z, z, z,
(byte)40, z, z, z, (byte)1, (byte)130, z, z,
z, (byte)2, (byte)2, (byte)2, z, z, z, z, //
z, z, z, z, z, z, z, z};
response.setStatus(response.SC_UNAUTHORIZED);
response.setHeader("WWW-Authenticate", "NTLM "
+ new sun.misc.BASE64Encoder().encodeBuffer(msg1).trim());
return;
else if (msg[8] == 3) {
off = 30;
length = msg[off+17]*256 + msg[off+16];
offset = msg[off+19]*256 + msg[off+18];
s = new String(msg, offset, length);
//out.println(s + " ");--------------------------> here getting system_name
else
return;
length = msg[off+1]*256 + msg[off];
offset = msg[off+3]*256 + msg[off+2];
s = new String(msg, offset, length);
//out.println(s + " ");
length = msg[off+9]*256 + msg[off+8];
offset = msg[off+11]*256 + msg[off+10];
s = new String(msg, offset, length);
out.println("Hello <span style='position:relative; width:190;"
+ " height:10;filter:glow(Color=#009966,Strength=1)'>");
out.println(s + "</SPAN>");----------------------------------->here getting loginname.
%>
from this i was able to get systemname & username,How do i get password.
Is it possible to get password?
Thanks,
Satya.

There's no way to get the password. NTLM uses a two-round challenge-response scheme which never send the password (neither clear nor encrypted) on the wire.
Why do you need the user's password? Is your service going to access a backend service using the user's credential? If so, you may need to use Kerberos delegation.

How to get windows XP login name in SAP.

I want get windows XP login name in SAP, which funcion module can and How method can, thanks.

hi,
GUI_GET_DESKTOP_INFO Returns information about the end-users desktop
TH_USER_INFO Returns information about user
Try this FM, not sure if it return windown user name....give it a try.
Hope this helps, Do reward.
Edited by: Runal Singh on Mar 27, 2008 4:16 PM

How to get Windows 8.1 to show up under application requirements

Similar Messages

Maybe you are looking for