How to get Windows to find airport disk?

I know that I have to get Bonjour to find the airport disk, but the Bonjour that there is for download is just for printer wizard. It won't find the disk, will it? I have no idea how to get Bonjour to find something else besides printer for windows.
And more, when I put a USB hub and add a printer + HD to airport extreme, the power is just enough to run the diskor something. My HD just disappears from the airport extreme. My HD is WD 250GB Passport III Media (FAT32 format)
Pls help. and Thx in adv.
By the way, the windows we use is XP and Bonjour 1.0.5
Message was edited by: PowerBon

The USB port on the AirPort Extreme base station (AEBS) is not designed by Apple to provide power to the hard drive.
Apple recommends using a powered hard drive or a powered USB hub to power the hard drive.

Similar Messages

How to get Windows Server 2012 trial license key?

How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)

Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim

How to get names of all hard disks?

Hi,
How to get names of all hard disks.
For example:
There are 3 disks in my computer: A, C,D (OS:　Windows).
and then I want to know how many disks (3) and their names( A, C, D) are there?
Please give me some code sapmles. Thanks.
(---sorry, my English is not very well----)

Look at a few of these
http://onesearch.sun.com/search/developers/index.jsp?qt=%22hard+disk%22+label&qp=forum%3A31&qp_name=Java+Programming&col=devforums

How to get windows username printed on each page irrespective of application? we have cm6030f.

How to get windows username printed on each page irrespective of application? we have HP CM6030F.

Hi,
Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Also, you could see this page
http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
Q: I am a student. Can I apply for a pass?
A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get window system user?

Hi,
How to get window system user use PL/SQL(form develope6i)?

If you don't use Oracle database then you will have to do one of two things:
(1) Now I'm back in the office I can check D2KWUTIL. The version I have comes with Forms6.0, so it is somewhat out of date, but it has a method called WIN_API_ENVIRONMENT.Get_Windows_Username - which works for NT/95 only, although I'm sure a later version will support more recent OS.
(2) If that's no good then you'll have to use whatever facilities your database offers: I only know Oracle.
I also repeat my suggestion that you try the Forms forum for additional help. This is the Database forum and so is focused on serverside Oracle PL/SQL. For your needs the Developer Suite forums are better.
Cheers, APC

How to get windows 7 on mac

Hello I have bought my Macbook Pro 13" 2 weeks ago how install i windows 7 on it what do i need to install windows 7??

hans_k wrote:
So i need copy disk of windows 7 ISO image
You know where I can get windows 7 ISO Image??
You buy it, try Amazon.

How to get windows form object of a MMC snapin node using MMC automation object model

Hello,
I am using automation object model for an existing mmc file and just trying to traverse all nodes of it. And i am able to do so.
My query is : how can i get the access of windows form object of a particular node . Windows form is present in result pane of a node, i want to get access of that so that i can perform some automation on that form.
http://msdn.microsoft.com/en-us/library/aa815049(v=vs.85).aspx
I found that if OCX control is in result view of any node, then "view object -> control object property" returns
the automation interface supplied by the control in the result view.
However, if result view is HTML view then how to get the automation interface of that result
view.
Thanks in advance,
Sumit

Hi Sumit,
I read the link you provide above. It seems that when you want to achieve your target by using MMC automation
object model, you need to use codes. Based on the programming language, if use VB, I suggest you post the question in
VB Forum. If you want to use C#, may post in
C# Forum.
In addition, there is an answered question, may help you to find the correct forum.
MMC development forum?
http://social.microsoft.com/Forums/en-US/3796a8e9-674e-4da0-a40e-4e4b69575c8e/mmc-development-forum?forum=whatforum
Since, it’s more related to development. We may can’t provide some more detailed information. Thanks for your
understanding.
Hope this helps.
Best regards,
Justin Gu

HDD failure, I'd like to know how to get Windows 7 back on it.

Hello everyone, I've had a HDD issue lately, but before I move on to describe my issue, here are the specs of my notebook:
HP Pavilion dv6-3264ca
AMD Triple-Core CPU 2.2 Ghz
6GB RAM
128MB ATI Graphic Card
750GB Toshiba HDD
Windows 7 64-bit
The issue:
Recently I've had a very unfortunate HDD failure. The recovery partition wouldn't even load. I tried booting my notebook on Linux with the HDD still attached, and it wouldn't read. I extracted the HDD and placed it in an HDD-enclosuer and it still wouldn't load on Windows XP or Vista or 7. It would however read in the device manager of Windows and also in the BIOS.
I needed to extract some high-priority data from there so I managed to retrieve all my data safely through a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help it be usable again, and if that were to happen, the recovery partition would then be removed in the process.
In addition to that, I would like to install Windows 7 64-bit onto the drive, but the notebook box did not come with an installation CD, which is quite frustrating. Is there any way HP can let me download Windows 7 through some warranty service?
I have a one-year warranty on my laptop.
So in closing, I would like to know if I can get Windows 7 back onto my HDD for free, or if I need to go about buying Windows 7 again.
Any advice from you kind folks?
This question was solved.
View Solution.

Hi,
Here are Two options.
1. If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
2. You can order a replacement set of Recovery Discs using the link below - these cost around $30 if you live in the US.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HOW to get Windows 7 installed on HP Pavilion 15 15-E028US 15-E1X73UA E1X73UA / E028US

Im just posting this to save the agony i went through trying to find correct windows 7 64 Bit drivers. hopefully this will save many people time since alot of people downgrade from windows 8 to windows 7. This is how i got Windows 7 installed on the HP Pavilion 15 15-E028US 15-E1X73UA E1X73UA / E028US notebook / laptop .
I installed the following drivers in the FOLLOWING ORDER: i only reason i would install in the following ordre is because i had problems installing the USB 3.0 drivers, but if you install in this order the USB 3.0 drivers should install fine.
NOTE: i tried this with the 64 bit version of win7 and it worked fine, i didnt have time to try with 32 bit win7.
1) AMD CHIPSET DRIVERS
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2 and download
http://www2.ati.com/drivers/13-4_vista_win7_win8_32-64_sb.exe
2) AMD Catalyst Notebook Display Driver ( Radeon HD 8450G )
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx and download
http://www2.ati.com/drivers/beta/amd_catalyst_13.10_mobility_beta.exe
3) ETHERNET CONTROLLER - Realtek Ethernet Controller Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61473.exe
4) NETWORK CONTROLLER - Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61518.exe
5) PCI DEVICE - Realtek PCIe Media Card Reader Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61420.exe
6) UKNOWN DEVICE - HP 3D DriveGuard Software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117749-1&cc=us&dlc=en&lc=en... and download
sp61291.exe
REBOOT YOUR MACHINE AT THIS POINT before installing the USB drivers below
7) AND FINALLY THE USB CONTOLLER AMD USB 3.0 Host Controller Driver (just put checkmarks next to the USB drivers (32bit & 64bit)
http://download.lenovo.com/consumer/mobiles/acpvga118w7.exe
This below is just for reference of my Device ID for the USB HOST CONTROLLER
PCI\VEN_1022&DEV_7814&SUBSYS_1982103C&REV_09
PCI\VEN_1022&DEV_7814&SUBSYS_1982103C
PCI\VEN_1022&DEV_7814&CC_0C0330
PCI\VEN_1022&DEV_7814&CC_0C03
keywords: downgrade windows7 notebook laptop E1X73UA/E028US

youre very welcome, thanks for taking the time to say thanks!! just trying to help few peeps out

How to get windows username & password

Hi friends,
Requirement is to get windows username & password,
My server is Tomcat4.0,
My code in login.jsp page is
<%
String auth = request.getHeader("Authorization");
if (auth == null) {
response.setStatus(response.SC_UNAUTHORIZED);
response.setHeader("WWW-Authenticate", "NTLM");
return;
if (auth.startsWith("NTLM ")) {
byte[] msg = new sun.misc.BASE64Decoder().decodeBuffer(auth.substring(5));
int off = 0, length, offset;
String s;
if (msg[8] == 1) {
off = 18;
byte z = 0;
byte[] msg1 = {(byte)'N', (byte)'T', (byte)'L', (byte)'M', (byte)'S',
(byte)'S', (byte)'P', z,
(byte)2, z, z, z, z, z, z, z,
(byte)40, z, z, z, (byte)1, (byte)130, z, z,
z, (byte)2, (byte)2, (byte)2, z, z, z, z, //
z, z, z, z, z, z, z, z};
response.setStatus(response.SC_UNAUTHORIZED);
response.setHeader("WWW-Authenticate", "NTLM "
+ new sun.misc.BASE64Encoder().encodeBuffer(msg1).trim());
return;
else if (msg[8] == 3) {
off = 30;
length = msg[off+17]*256 + msg[off+16];
offset = msg[off+19]*256 + msg[off+18];
s = new String(msg, offset, length);
//out.println(s + " ");--------------------------> here getting system_name
else
return;
length = msg[off+1]*256 + msg[off];
offset = msg[off+3]*256 + msg[off+2];
s = new String(msg, offset, length);
//out.println(s + " ");
length = msg[off+9]*256 + msg[off+8];
offset = msg[off+11]*256 + msg[off+10];
s = new String(msg, offset, length);
out.println("Hello <span style='position:relative; width:190;"
+ " height:10;filter:glow(Color=#009966,Strength=1)'>");
out.println(s + "</SPAN>");----------------------------------->here getting loginname.
%>
from this i was able to get systemname & username,How do i get password.
Is it possible to get password?
Thanks,
Satya.

There's no way to get the password. NTLM uses a two-round challenge-response scheme which never send the password (neither clear nor encrypted) on the wire.
Why do you need the user's password? Is your service going to access a backend service using the user's credential? If so, you may need to use Kerberos delegation.

How to get windows XP login name in SAP.

I want get windows XP login name in SAP, which funcion module can and How method can, thanks.

hi,
GUI_GET_DESKTOP_INFO Returns information about the end-users desktop
TH_USER_INFO Returns information about user
Try this FM, not sure if it return windown user name....give it a try.
Hope this helps, Do reward.
Edited by: Runal Singh on Mar 27, 2008 4:16 PM

How to stream music from an Airport Disk to iTunes?

I have a new Airport Express (802.11n) and have a Maxtor hard drive hooked up as an Airport Disk. It's all networked and working fine, except I can't figure out how to stream songs from the hard drive (rather than import them into iTunes). Went to the Genius Bar, but they didn't know what I was talking about. Any ideas how to do this?

I'm currently doing this in the following way.
1. Copy your "Music" folder over to one of the external drives (I'd recommend connecting directly to the drive through USB if you can, since its faster).
2. Hold down the option key when you open iTunes. It will ask you whether you want to make a new library or select one.
3. Select the iTunes folder on the drive after you have that mounted again through the network.
Voila, your music is stored remotely, adding music will go to the new drive.

How to get "Windows Installer CleanUP" application.

I use PC Vista Home Premium, and I use Adobe Acrobat Standard 8, till now it is working very well and nothing wrong. I would like to install an application of "Windows Installer CleanUP" to my PC for sometime in future I may need to use it, but I do not know how to get it to download and install the "Windows Installer CleanUP" into my PC Vista Home Premium.
Please help and teach me. Thank you for your time and attentions.

Since that is a MicroSoft product, you might have more luck at MicroSoft support site or forum dealing specifically with MicroSoft products.

How to get windows user identity after deploying code in IIS6.1

Hi,
In my asp.net application I have to get windows user identity. My backend is oracle.
I set the windows authentication mode and impersonate to true. But still I'm not getting the actual windows user name.
Please tell me how to get it.
k.Bhaskar.

Hello,
For this kind of issue please consult on IIS forum:
http://forums.iis.net/
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get more space on my disk in iphoto? It says I don't have any more space..Help!

How to get more space in iphoto? It says I don't have any more space?? Help...

You can look at the material stored and see what you don't need and delete. But a better way is to get an external hard drive and move large quantities of material to the external storage. That will free up internal storage capacity.

How to get Windows to find airport disk?

Similar Messages

Maybe you are looking for